rpm creation problems

[edscott wilson garcia]

El dom, 01-06-2003 a las 18:21, Gavin Jones escribió:
> 
> Hi Jasper,
> 
> All worked OK except for xffm, one minor problem and one larger one; 
> 
> xffm 
> ------------
> 
> I had to comment out 
> BuildRequires:	dbh-devel >= 1.0
> from the specfile as dbh does not appear to come with a dbh-devel file just i386 binary or src rpm. That right Edscott ??

dbh-devel does not exist to the best of my knowledge. The very small .h
files needed for compiling programs with dbh come along with dbh.

> 
> Finally stopped on this , I haven't a clue as the fgr manpage is part of 
the xffm rpm and its not created yet. There is no presence on my system 
other than /usr/man/man1/fgr.1 , I even tried removing it , no dice. 
Strangley rpm reports that the file is unowned . Any ideas ?

Maybe the spec file is wrong or something. fgr replaced glob some days
ago. You should have a fgr subdirectory within xffm.

Edscott

> 
> error: Installed (but unpackaged) file(s) found:
>    /usr/share/man/man1/fgr.1.gz
> 
> 
> RPM build errors:
>     Installed (but unpackaged) file(s) found:
>    /usr/share/man/man1/fgr.1.gz
> make: *** [rpm] Error 1
> 
> 
> Regards
> Gavin
> 
> 
> On Sun, 1 Jun 2003 22:31:31 +0100
> Gavin Jones <roggtemp at yahoo.co.uk> wrote:
> 
> > 
> > 
> > Hi Jasper,
> > 
> > I'm going to clean out all previous traces of xfce4 and run my custom checkout/build rpm scripts.
> > 
> > Let you know in about an hour :)
> > 
> > Regards
> > Gav
> > 
> > 
> > On Sun, 1 Jun 2003 19:25:31 +0200
> > Jasper Huijsmans <jasper at moongroup.com> wrote:
> > 
> > > Hey, 
> > > 
> > > On Sun, 1 Jun 2003 16:30:07 +0100
> > > Gavin Jones <roggtemp at yahoo.co.uk> wrote:
> > > 
> > > > Hello Jasper,
> > > > 
> > > > Its a fresh cvs checkout [16:00 GMT] .
> > > > 
> > > > I'm quite happy to test whenever you want :)
> > > > 
> > > 
> > > You're a great help. Let's get this baby to build correctly ;-)
> > > 
> > > > 
> > > > xfce-mcs-plugins
> > > > -----------------
> > > > tr:
> > > > msgmerge: tr.old.po: warning: Charset missing in header.
> > > >                               Message conversion to user's charset
> > > >                               will not work.
> > > > tr.old.po:9:2: parse error
> > > > tr.old.po:9: keyword "tr" unknown
> > > > tr.old.po:9: keyword "po" unknown
> > > > msgmerge: found 3 fatal errors
> > > > msgmerge for tr.gmo failed!
> > > 
> > > I tried to fix this one. Seems to work. 
> > > 
> > > [...]
> > > > 
> > > > xfce-utils
> > > > -----------
> > > > 
> > > > config.status: creating xfce4-about/INFO.html.ca
> > > > config.status: error: cannot find input file:
> > > > xfce4-about/INFO.html.ca.in error: Bad exit status from
> > > > /var/tmp/rpm-tmp.29799 (%build)
> > > > 
> > > > 
> > > > RPM build errors:
> > > >     Bad exit status from /var/tmp/rpm-tmp.29799 (%build)
> > > > make: *** [rpm] Error 1
> > > > 
> > > 
> > > I don't understand this. 'DESTDIR=$HOME/src make distcheck' works fine
> > > for me, which means the above file must be present. Do you have the
> > > file? and when you do 'make dist' is it included in the tarball?
> > > 
> > > I did fix another po-file issue, so you could try updating anyway.
> > > 
> > > > xfdesktop
> > > > ---------
> > > > 
> > > > Making all in images
> > > > make[5]: Entering directory
> > > > `/usr/src/redhat/BUILD/xfdesktop-3.90/doc/C/images' make[5]: *** No
> > > > rule to make target `root_menu2.png', needed by `all-am'.  Stop.
> > > 
> > > Same as above, distcheck works for me, which again means the file must
> > > be present. Can you check if you have it?
> > > 
> > > > 
> > > > xffm
> > > > ----------
> > > > 
> > > > make[1]: Entering directory `/usr/src/xfce4/xfce-devel/xffm'
> > > > rm -rf .libs _libs
> > > > rm -f *.lo
> > > > make[1]: Leaving directory `/usr/src/xfce4/xfce-devel/xffm'
> > > > make: *** No rule to make target `acconfig.h', needed by `distdir'. 
> > > > Stop.
> > > > 
> > > 
> > > hmm, you reported that earlier and then I saw it too. But I fixed that
> > > (yesterday I believe) and at least now it works for me. I'm beginning to
> > > think you may have some older versions lying around ...
> > > 
> > > > 
> > > > xfwm
> > > > -----------
> > > > 
> > > > Making all in images
> > > > make[5]: Entering directory
> > > > `/usr/src/redhat/BUILD/xfwm4-0.90/doc/C/images' make[5]: *** No rule
> > > > to make target `decoration_style.png', needed by `all-am'.  Stop.
> > > 
> > > Same as the others, distcheck works for me. Please check if you have
> > > this file.
> > > 
> > > > 
> > > > All other xfce-devel built OK.
> > > > 
> > > 
> > > Ok, great. So, the question is, do you have old versions lying around --
> > > perhaps in the rpm build dir, I don't know -- or does anyone else see
> > > these problems too?
> > > 
> > > I really would like to get this working. Being able to build rpms is a
> > > very good feature to have.
> > > 
> > > Thanks,
> > > 	Jasper
> > > 
> > > _______________________________________________
> > > Xfce4-dev mailing list
> > > Xfce4-dev at xfce.org
> > > http://moongroup.com/mailman/listinfo/xfce4-dev
> > 
> > 
> > _______________________________________________
> > Xfce4-dev mailing list
> > Xfce4-dev at xfce.org
> > http://moongroup.com/mailman/listinfo/xfce4-dev
> 
> 
> _______________________________________________
> Xfce4-dev mailing list
> Xfce4-dev at xfce.org
> http://moongroup.com/mailman/listinfo/xfce4-dev
>