[Xfce4-commits] <xfce4-sensors-plugin:master> substitute more libxfcegui4 by libxfce4ui; newer ltmain.sh
Fabian Nowak
noreply at xfce.org
Tue May 10 12:04:01 CEST 2011
Updating branch refs/heads/master
to 2329169a8528ae02486c8703aed03e41b843d081 (commit)
from d3e83a4991876bcfadf90e8c781f0bb82c30230d (commit)
commit 2329169a8528ae02486c8703aed03e41b843d081
Author: Fabian Nowak <nowak at kit.edu>
Date: Tue May 10 12:02:57 2011 +0200
substitute more libxfcegui4 by libxfce4ui; newer ltmain.sh
README | 6 +-
ltmain.sh | 3983 +++++++++++++++++++------------------------------------
src/actions.c | 3 +-
src/callbacks.c | 3 +-
src/interface.c | 3 +-
5 files changed, 1386 insertions(+), 2612 deletions(-)
diff --git a/README b/README
index 54d05da..fa6b695 100644
--- a/README
+++ b/README
@@ -10,12 +10,12 @@ Licence: GPL version 2 (or later at your option)
Description: Reads your hardware sensor values and displays them in your panel
-Dependencies: libxfcegui4-4, libxfce4util-i4, libgtk2.0-0,
+Dependencies: libxfce4ui, libxfce4util, libgtk2.0-0,
xfce4-panel
- libxfcegui4-dev, libxfce4util-dev, libgtk2.0-dev,
+ libxfce4ui-dev, libxfce4util-dev, libgtk2.0-dev,
xfce4-panel-dev
-Optional: hddtemp, netcat, lmsensors3, working ACPI library
+Optional: hddtemp, netcat, lmsensors3, working ACPI library, libnotify, nvidia-utils/xnvctrl
Installation: ./configure && make && [sudo] make install
diff --git a/ltmain.sh b/ltmain.sh
index 6f650ae..7ed280b 100755
--- a/ltmain.sh
+++ b/ltmain.sh
@@ -1,9 +1,9 @@
+# Generated from ltmain.m4sh.
-# libtool (GNU libtool) 2.4
+# ltmain.sh (GNU libtool) 2.2.6b
# Written by Gordon Matzigkeit <gord at gnu.ai.mit.edu>, 1996
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
@@ -32,56 +32,50 @@
#
# Provide generalized library-building support services.
#
-# --config show all configuration variables
-# --debug enable verbose shell tracing
-# -n, --dry-run display commands without modifying any files
-# --features display basic configuration information and exit
-# --mode=MODE use operation mode MODE
-# --preserve-dup-deps don't remove duplicate dependency libraries
-# --quiet, --silent don't print informational messages
-# --no-quiet, --no-silent
-# print informational messages (default)
-# --tag=TAG use configuration variables from tag TAG
-# -v, --verbose print more informational messages than default
-# --no-verbose don't print the extra informational messages
-# --version print version information
-# -h, --help, --help-all print short, long, or detailed help message
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print informational messages (default)
+# --version print version information
+# -h, --help print short or long help message
#
# MODE must be one of the following:
#
-# clean remove files from the build directory
-# compile compile a source file into a libtool object
-# execute automatically set library path, then run a program
-# finish complete the installation of libtool libraries
-# install install libraries or executables
-# link create a library or an executable
-# uninstall remove libraries from an installed directory
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
#
-# MODE-ARGS vary depending on the MODE. When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# MODE-ARGS vary depending on the MODE.
# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
#
# When reporting a bug, please describe a test case to reproduce it and
# include the following information:
#
-# host-triplet: $host
-# shell: $SHELL
-# compiler: $LTCC
-# compiler flags: $LTCFLAGS
-# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool) 2.4 Debian-2.4-2
-# automake: $automake_version
-# autoconf: $autoconf_version
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.2.6b Debian-2.2.6b-2ubuntu1
+# automake: $automake_version
+# autoconf: $autoconf_version
#
# Report bugs to <bug-libtool at gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
-PROGRAM=libtool
+PROGRAM=ltmain.sh
PACKAGE=libtool
-VERSION="2.4 Debian-2.4-2"
+VERSION="2.2.6b Debian-2.2.6b-2ubuntu1"
TIMESTAMP=""
-package_revision=1.3293
+package_revision=1.3017
# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -97,15 +91,10 @@ fi
BIN_SH=xpg4; export BIN_SH # for Tru64
DUALCASE=1; export DUALCASE # for MKS sh
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
# NLS nuisances: We save the old values to restore during execute mode.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
lt_user_locale=
lt_safe_locale=
for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
@@ -118,24 +107,15 @@ do
lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
fi"
done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
$lt_unset CDPATH
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
: ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${ECHO="echo"}
: ${EGREP="/bin/grep -E"}
: ${FGREP="/bin/grep -F"}
: ${GREP="/bin/grep"}
@@ -164,27 +144,6 @@ IFS=" $lt_nl"
dirname="s,/[^/]*$,,"
basename="s,^.*/,,"
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE. If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-} # func_dirname may be replaced by extended shell implementation
-
-
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
-
-
# func_dirname_and_basename file append nondir_replacement
# perform func_basename and func_dirname in a single function
# call:
@@ -199,183 +158,33 @@ func_basename ()
# those functions but instead duplicate the functionality here.
func_dirname_and_basename ()
{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
- func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
-
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
- esac
-} # func_stripname may be replaced by extended shell implementation
-
-
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
- s@/\./@/@g
- t dotsl
- s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
-
-# func_normal_abspath PATH
-# Remove doubled-up and trailing slashes, "." path components,
-# and cancel out any ".." path components in PATH after making
-# it an absolute path.
-# value returned in "$func_normal_abspath_result"
-func_normal_abspath ()
-{
- # Start from root dir and reassemble the path.
- func_normal_abspath_result=
- func_normal_abspath_tpath=$1
- func_normal_abspath_altnamespace=
- case $func_normal_abspath_tpath in
- "")
- # Empty path, that just means $cwd.
- func_stripname '' '/' "`pwd`"
- func_normal_abspath_result=$func_stripname_result
- return
- ;;
- # The next three entries are used to spot a run of precisely
- # two leading slashes without using negated character classes;
- # we take advantage of case's first-match behaviour.
- ///*)
- # Unusual form of absolute path, do nothing.
- ;;
- //*)
- # Not necessarily an ordinary path; POSIX reserves leading '//'
- # and for example Cygwin uses it to access remote file shares
- # over CIFS/SMB, so we conserve a leading double slash if found.
- func_normal_abspath_altnamespace=/
- ;;
- /*)
- # Absolute path, do nothing.
- ;;
- *)
- # Relative path, prepend $cwd.
- func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
- ;;
- esac
- # Cancel out all the simple stuff to save iterations. We also want
- # the path to end with a slash for ease of parsing, so make sure
- # there is one (and only one) here.
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
- while :; do
- # Processed it all yet?
- if test "$func_normal_abspath_tpath" = / ; then
- # If we ascended to the root using ".." the result may be empty now.
- if test -z "$func_normal_abspath_result" ; then
- func_normal_abspath_result=/
- fi
- break
- fi
- func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcar"`
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcdr"`
- # Figure out what to do with it
- case $func_normal_abspath_tcomponent in
- "")
- # Trailing empty path component, ignore it.
- ;;
- ..)
- # Parent dir; strip last assembled component from result.
- func_dirname "$func_normal_abspath_result"
- func_normal_abspath_result=$func_dirname_result
- ;;
- *)
- # Actual path component, append it.
- func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
- ;;
- esac
- done
- # Restore leading double-slash if one was found on entry.
- func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
}
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-# value returned in "$func_relative_path_result"
-func_relative_path ()
-{
- func_relative_path_result=
- func_normal_abspath "$1"
- func_relative_path_tlibdir=$func_normal_abspath_result
- func_normal_abspath "$2"
- func_relative_path_tbindir=$func_normal_abspath_result
-
- # Ascend the tree starting from libdir
- while :; do
- # check if we have found a prefix of bindir
- case $func_relative_path_tbindir in
- $func_relative_path_tlibdir)
- # found an exact match
- func_relative_path_tcancelled=
- break
- ;;
- $func_relative_path_tlibdir*)
- # found a matching prefix
- func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
- func_relative_path_tcancelled=$func_stripname_result
- if test -z "$func_relative_path_result"; then
- func_relative_path_result=.
- fi
- break
- ;;
- *)
- func_dirname $func_relative_path_tlibdir
- func_relative_path_tlibdir=${func_dirname_result}
- if test "x$func_relative_path_tlibdir" = x ; then
- # Have to descend all the way to the root!
- func_relative_path_result=../$func_relative_path_result
- func_relative_path_tcancelled=$func_relative_path_tbindir
- break
- fi
- func_relative_path_result=../$func_relative_path_result
- ;;
- esac
- done
-
- # Now calculate path; take care to avoid doubling-up slashes.
- func_stripname '' '/' "$func_relative_path_result"
- func_relative_path_result=$func_stripname_result
- func_stripname '/' '/' "$func_relative_path_tcancelled"
- if test "x$func_stripname_result" != x ; then
- func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
- fi
+# Generated shell functions inserted here.
- # Normalisation. If bindir is libdir, return empty string,
- # else relative path ending with a slash; either way, target
- # file name can be directly appended.
- if test ! -z "$func_relative_path_result"; then
- func_stripname './' '' "$func_relative_path_result/"
- func_relative_path_result=$func_stripname_result
- fi
-}
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
# The name of this program:
+# In the unlikely event $progname began with a '-', it would play havoc with
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
func_dirname_and_basename "$progpath"
progname=$func_basename_result
+case $progname in
+ -*) progname=./$progname ;;
+esac
# Make sure we have an absolute path for reexecution:
case $progpath in
@@ -406,15 +215,6 @@ sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
# Same as above, but do not quote variable references.
double_quote_subst='s/\(["`\\]\)/\\\1/g'
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
-
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes. A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
# Re-`\' parameter expansions in output of double_quote_subst that were
# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
# in input to double_quote_subst, that '$' was protected from expansion.
@@ -443,7 +243,7 @@ opt_warning=:
# name if it has been set yet.
func_echo ()
{
- $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+ $ECHO "$progname${mode+: }$mode: $*"
}
# func_verbose arg...
@@ -458,25 +258,18 @@ func_verbose ()
:
}
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
- $ECHO "$*"
-}
-
# func_error arg...
# Echo program name prefixed message to standard error.
func_error ()
{
- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+ $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
}
# func_warning arg...
# Echo program name prefixed warning message to standard error.
func_warning ()
{
- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+ $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
# bash bug again:
:
@@ -533,9 +326,9 @@ func_mkdir_p ()
case $my_directory_path in */*) ;; *) break ;; esac
# ...otherwise throw away the child directory and loop
- my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+ my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
done
- my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+ my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
save_mkdir_p_IFS="$IFS"; IFS=':'
for my_dir in $my_dir_list; do
@@ -585,7 +378,7 @@ func_mktempdir ()
func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
fi
- $ECHO "$my_tmpdir"
+ $ECHO "X$my_tmpdir" | $Xsed
}
@@ -599,7 +392,7 @@ func_quote_for_eval ()
{
case $1 in
*[\\\`\"\$]*)
- func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+ func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
*)
func_quote_for_eval_unquoted_result="$1" ;;
esac
@@ -626,7 +419,7 @@ func_quote_for_expand ()
{
case $1 in
*[\\\`\"]*)
- my_arg=`$ECHO "$1" | $SED \
+ my_arg=`$ECHO "X$1" | $Xsed \
-e "$double_quote_subst" -e "$sed_double_backslash"` ;;
*)
my_arg="$1" ;;
@@ -695,39 +488,15 @@ func_show_eval_locale ()
fi
}
-# func_tr_sh
-# Turn $1 into a string suitable for a shell variable name.
-# Result is stored in $func_tr_sh_result. All characters
-# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
-# if $1 begins with a digit, a '_' is prepended as well.
-func_tr_sh ()
-{
- case $1 in
- [0-9]* | *[!a-zA-Z0-9_]*)
- func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
- ;;
- * )
- func_tr_sh_result=$1
- ;;
- esac
-}
+
+
# func_version
# Echo version message to standard output and exit.
func_version ()
{
- $opt_debug
-
- $SED -n '/(C)/!b go
- :more
- /\./!{
- N
- s/\n# / /
- b more
- }
- :go
- /^# '$PROGRAM' (GNU /,/# warranty; / {
+ $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
s/^# //
s/^# *$//
s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
@@ -740,28 +509,22 @@ func_version ()
# Echo short help message to standard output and exit.
func_usage ()
{
- $opt_debug
-
- $SED -n '/^# Usage:/,/^# *.*--help/ {
+ $SED -n '/^# Usage:/,/# -h/ {
s/^# //
s/^# *$//
s/\$progname/'$progname'/
p
}' < "$progpath"
- echo
+ $ECHO
$ECHO "run \`$progname --help | more' for full usage"
exit $?
}
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+# func_help
+# Echo long help message to standard output and exit.
func_help ()
{
- $opt_debug
-
$SED -n '/^# Usage:/,/# Report bugs to/ {
- :print
s/^# //
s/^# *$//
s*\$progname*'$progname'*
@@ -774,15 +537,8 @@ func_help ()
s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
p
- d
- }
- /^# .* home page:/b print
- /^# General help using/b print
- ' < "$progpath"
- ret=$?
- if test -z "$1"; then
- exit $ret
- fi
+ }' < "$progpath"
+ exit $?
}
# func_missing_arg argname
@@ -790,106 +546,63 @@ func_help ()
# exit_cmd.
func_missing_arg ()
{
- $opt_debug
-
- func_error "missing argument for $1."
+ func_error "missing argument for $1"
exit_cmd=exit
}
+exit_cmd=:
-# func_split_short_opt shortopt
-# Set func_split_short_opt_name and func_split_short_opt_arg shell
-# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
-{
- my_sed_short_opt='1s/^\(..\).*$/\1/;q'
- my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
-
- func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
- func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
-
-
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
-{
- my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
- my_sed_long_arg='1s/^--[^=]*=//'
-
- func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
- func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
-exit_cmd=:
+# Check that we have a working $ECHO.
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+ # Yippee, $ECHO works!
+ :
+else
+ # Restart under the correct shell, and then maybe $ECHO will work.
+ exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit $EXIT_SUCCESS
+fi
magic="%%%MAGIC variable%%%"
magic_exe="%%%MAGIC EXE variable%%%"
# Global variables.
+# $mode is unset
nonopt=
+execute_dlfiles=
preserve_args=
lo2o="s/\\.lo\$/.${objext}/"
o2lo="s/\\.${objext}\$/.lo/"
extracted_archives=
extracted_serial=0
+opt_dry_run=false
+opt_duplicate_deps=false
+opt_silent=false
+opt_debug=:
+
# If this variable is set in any of the actions, the command in it
# will be execed at the end. This prevents here-documents from being
# left over by shells.
exec_cmd=
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
- eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
-
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
-{
- func_quote_for_eval "${2}"
- eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
-
-
-# func_arith arithmetic-term...
-func_arith ()
-{
- func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
-
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
- func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
-
-
-# func_lo2o object
-func_lo2o ()
-{
- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
-
-
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
-
-
# func_fatal_configuration arg...
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
@@ -923,16 +636,16 @@ func_config ()
# Display the features supported by this script.
func_features ()
{
- echo "host: $host"
+ $ECHO "host: $host"
if test "$build_libtool_libs" = yes; then
- echo "enable shared libraries"
+ $ECHO "enable shared libraries"
else
- echo "disable shared libraries"
+ $ECHO "disable shared libraries"
fi
if test "$build_old_libs" = yes; then
- echo "enable static libraries"
+ $ECHO "enable static libraries"
else
- echo "disable static libraries"
+ $ECHO "disable static libraries"
fi
exit $?
@@ -979,204 +692,117 @@ func_enable_tag ()
esac
}
-# func_check_version_match
-# Ensure that we are using m4 macros, and libtool script from the same
-# release of libtool.
-func_check_version_match ()
+# Parse options once, thoroughly. This comes as soon as possible in
+# the script to make things like `libtool --version' happen quickly.
{
- if test "$package_revision" != "$macro_revision"; then
- if test "$VERSION" != "$macro_version"; then
- if test -z "$macro_version"; then
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from an older release.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
- else
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
-$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
-$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
-$progname: and run autoconf again.
-_LT_EOF
- fi
- else
- cat >&2 <<_LT_EOF
-$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
-$progname: but the definition of this LT_INIT comes from revision $macro_revision.
-$progname: You should recreate aclocal.m4 with macros from revision $package_revision
-$progname: of $PACKAGE $VERSION and run autoconf again.
-_LT_EOF
- fi
-
- exit $EXIT_MISMATCH
- fi
-}
-
-
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
- shift; set dummy --mode clean ${1+"$@"}; shift
- ;;
-compile|compil|compi|comp|com|co|c)
- shift; set dummy --mode compile ${1+"$@"}; shift
- ;;
-execute|execut|execu|exec|exe|ex|e)
- shift; set dummy --mode execute ${1+"$@"}; shift
- ;;
-finish|finis|fini|fin|fi|f)
- shift; set dummy --mode finish ${1+"$@"}; shift
- ;;
-install|instal|insta|inst|ins|in|i)
- shift; set dummy --mode install ${1+"$@"}; shift
- ;;
-link|lin|li|l)
- shift; set dummy --mode link ${1+"$@"}; shift
- ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
- shift; set dummy --mode uninstall ${1+"$@"}; shift
- ;;
-esac
-
-
-
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
+ # Shorthand for --mode=foo, only valid as the first argument
+ case $1 in
+ clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+ compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+ execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+ finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+ link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+ esac
-# Parse options once, thoroughly. This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
-{
- # this just eases exit handling
- while test $# -gt 0; do
+ # Parse non-mode specific arguments:
+ while test "$#" -gt 0; do
opt="$1"
shift
+
case $opt in
- --debug|-x) opt_debug='set -x'
+ --config) func_config ;;
+
+ --debug) preserve_args="$preserve_args $opt"
func_echo "enabling shell trace mode"
+ opt_debug='set -x'
$opt_debug
;;
- --dry-run|--dryrun|-n)
- opt_dry_run=:
- ;;
- --config)
- opt_config=:
-func_config
- ;;
- --dlopen|-dlopen)
- optarg="$1"
- opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
+
+ -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ execute_dlfiles="$execute_dlfiles $1"
shift
;;
- --preserve-dup-deps)
- opt_preserve_dup_deps=:
- ;;
- --features)
- opt_features=:
-func_features
- ;;
- --finish)
- opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
- ;;
- --help)
- opt_help=:
- ;;
- --help-all)
- opt_help_all=:
-opt_help=': help-all'
- ;;
- --mode)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_mode="$optarg"
-case $optarg in
- # Valid mode arguments:
- clean|compile|execute|finish|install|link|relink|uninstall) ;;
-
- # Catch anything else as an error
- *) func_error "invalid argument for $opt"
- exit_cmd=exit
- break
- ;;
-esac
+
+ --dry-run | -n) opt_dry_run=: ;;
+ --features) func_features ;;
+ --finish) mode="finish" ;;
+
+ --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ case $1 in
+ # Valid mode arguments:
+ clean) ;;
+ compile) ;;
+ execute) ;;
+ finish) ;;
+ install) ;;
+ link) ;;
+ relink) ;;
+ uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+ esac
+
+ mode="$1"
shift
;;
- --no-silent|--no-quiet)
- opt_silent=false
-func_append preserve_args " $opt"
- ;;
- --no-verbose)
- opt_verbose=false
-func_append preserve_args " $opt"
- ;;
- --silent|--quiet)
+
+ --preserve-dup-deps)
+ opt_duplicate_deps=: ;;
+
+ --quiet|--silent) preserve_args="$preserve_args $opt"
opt_silent=:
-func_append preserve_args " $opt"
- opt_verbose=false
;;
- --verbose|-v)
- opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
+
+ --verbose| -v) preserve_args="$preserve_args $opt"
+ opt_silent=false
;;
- --tag)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
+
+ --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ preserve_args="$preserve_args $opt $1"
+ func_enable_tag "$1" # tagname is set here
shift
;;
- -\?|-h) func_usage ;;
- --help) func_help ;;
- --version) func_version ;;
-
# Separate optargs to long options:
- --*=*)
- func_split_long_opt "$opt"
- set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+ -dlopen=*|--mode=*|--tag=*)
+ func_opt_split "$opt"
+ set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
shift
;;
- # Separate non-argument short options:
- -\?*|-h*|-n*|-v*)
- func_split_short_opt "$opt"
- set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
- shift
- ;;
+ -\?|-h) func_usage ;;
+ --help) opt_help=: ;;
+ --version) func_version ;;
- --) break ;;
- -*) func_fatal_help "unrecognized option \`$opt'" ;;
- *) set dummy "$opt" ${1+"$@"}; shift; break ;;
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+
+ *) nonopt="$opt"
+ break
+ ;;
esac
done
- # Validate options:
-
- # save first non-option argument
- if test "$#" -gt 0; then
- nonopt="$opt"
- shift
- fi
-
- # preserve --debug
- test "$opt_debug" = : || func_append preserve_args " --debug"
case $host in
*cygwin* | *mingw* | *pw32* | *cegcc*)
@@ -1184,44 +810,82 @@ func_enable_tag "$optarg"
opt_duplicate_compiler_generated_deps=:
;;
*)
- opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
;;
esac
- $opt_help || {
- # Sanity checks first:
- func_check_version_match
+ # Having warned about all mis-specified options, bail out if
+ # anything was wrong.
+ $exit_cmd $EXIT_FAILURE
+}
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- func_fatal_configuration "not configured to build any kind of library"
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
fi
- # Darwin sucks
- eval std_shrext=\"$shrext_cmds\"
+ exit $EXIT_MISMATCH
+ fi
+}
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
- func_error "unrecognized option \`-dlopen'"
- $ECHO "$help" 1>&2
- exit $EXIT_FAILURE
- fi
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$progname --help --mode=$opt_mode' for more information."
- }
+## ----------- ##
+## Main. ##
+## ----------- ##
+$opt_help || {
+ # Sanity checks first:
+ func_check_version_match
- # Bail if the options were screwed
- $exit_cmd $EXIT_FAILURE
-}
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
+ fi
+ test -z "$mode" && func_fatal_error "error: you must specify a MODE."
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$execute_dlfiles" && test "$mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$mode' for more information."
+}
-## ----------- ##
-## Main. ##
-## ----------- ##
# func_lalib_p file
# True iff FILE is a libtool `.la' library or `.lo' object file.
@@ -1286,9 +950,12 @@ func_ltwrapper_executable_p ()
# temporary ltwrapper_script.
func_ltwrapper_scriptname ()
{
- func_dirname_and_basename "$1" "" "."
- func_stripname '' '.exe' "$func_basename_result"
- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ func_ltwrapper_scriptname_result=""
+ if func_ltwrapper_executable_p "$1"; then
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ fi
}
# func_ltwrapper_p file
@@ -1334,37 +1001,6 @@ func_source ()
}
-# func_resolve_sysroot PATH
-# Replace a leading = in PATH with a sysroot. Store the result into
-# func_resolve_sysroot_result
-func_resolve_sysroot ()
-{
- func_resolve_sysroot_result=$1
- case $func_resolve_sysroot_result in
- =*)
- func_stripname '=' '' "$func_resolve_sysroot_result"
- func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
- ;;
- esac
-}
-
-# func_replace_sysroot PATH
-# If PATH begins with the sysroot, replace it with = and
-# store the result into func_replace_sysroot_result.
-func_replace_sysroot ()
-{
- case "$lt_sysroot:$1" in
- ?*:"$lt_sysroot"*)
- func_stripname "$lt_sysroot" '' "$1"
- func_replace_sysroot_result="=$func_stripname_result"
- ;;
- *)
- # Including no sysroot.
- func_replace_sysroot_result=$1
- ;;
- esac
-}
-
# func_infer_tag arg
# Infer tagged configuration to use if any are available and
# if one wasn't chosen via the "--tag" command line option.
@@ -1377,15 +1013,13 @@ func_infer_tag ()
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
- func_append_quoted CC_quoted "$arg"
+ func_quote_for_eval "$arg"
+ CC_quoted="$CC_quoted $func_quote_for_eval_result"
done
- CC_expanded=`func_echo_all $CC`
- CC_quoted_expanded=`func_echo_all $CC_quoted`
case $@ in
# Blanks in the command may have been stripped by the calling shell,
# but not from the CC environment variable when configure was run.
- " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
- " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
# Blanks at the start of $base_compile will cause this to fail
# if we don't check for them as well.
*)
@@ -1396,13 +1030,11 @@ func_infer_tag ()
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
- func_append_quoted CC_quoted "$arg"
+ func_quote_for_eval "$arg"
+ CC_quoted="$CC_quoted $func_quote_for_eval_result"
done
- CC_expanded=`func_echo_all $CC`
- CC_quoted_expanded=`func_echo_all $CC_quoted`
case "$@ " in
- " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
- " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
# The compiler in the base compile command matches
# the one in the tagged configuration.
# Assume this is the tagged configuration we want.
@@ -1465,486 +1097,6 @@ EOF
}
}
-
-##################################################
-# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
-##################################################
-
-# func_convert_core_file_wine_to_w32 ARG
-# Helper function used by file name conversion functions when $build is *nix,
-# and $host is mingw, cygwin, or some other w32 environment. Relies on a
-# correctly configured wine environment available, with the winepath program
-# in $build's $PATH.
-#
-# ARG is the $build file name to be converted to w32 format.
-# Result is available in $func_convert_core_file_wine_to_w32_result, and will
-# be empty on error (or when ARG is empty)
-func_convert_core_file_wine_to_w32 ()
-{
- $opt_debug
- func_convert_core_file_wine_to_w32_result="$1"
- if test -n "$1"; then
- # Unfortunately, winepath does not exit with a non-zero error code, so we
- # are forced to check the contents of stdout. On the other hand, if the
- # command is not found, the shell will set an exit code of 127 and print
- # *an error message* to stdout. So we must check for both error code of
- # zero AND non-empty stdout, which explains the odd construction:
- func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
- if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
- func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
- $SED -e "$lt_sed_naive_backslashify"`
- else
- func_convert_core_file_wine_to_w32_result=
- fi
- fi
-}
-# end: func_convert_core_file_wine_to_w32
-
-
-# func_convert_core_path_wine_to_w32 ARG
-# Helper function used by path conversion functions when $build is *nix, and
-# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
-# configured wine environment available, with the winepath program in $build's
-# $PATH. Assumes ARG has no leading or trailing path separator characters.
-#
-# ARG is path to be converted from $build format to win32.
-# Result is available in $func_convert_core_path_wine_to_w32_result.
-# Unconvertible file (directory) names in ARG are skipped; if no directory names
-# are convertible, then the result may be empty.
-func_convert_core_path_wine_to_w32 ()
-{
- $opt_debug
- # unfortunately, winepath doesn't convert paths, only file names
- func_convert_core_path_wine_to_w32_result=""
- if test -n "$1"; then
- oldIFS=$IFS
- IFS=:
- for func_convert_core_path_wine_to_w32_f in $1; do
- IFS=$oldIFS
- func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
- if test -n "$func_convert_core_file_wine_to_w32_result" ; then
- if test -z "$func_convert_core_path_wine_to_w32_result"; then
- func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
- else
- func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
- fi
- fi
- done
- IFS=$oldIFS
- fi
-}
-# end: func_convert_core_path_wine_to_w32
-
-
-# func_cygpath ARGS...
-# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
-# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
-# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
-# (2), returns the Cygwin file name or path in func_cygpath_result (input
-# file name or path is assumed to be in w32 format, as previously converted
-# from $build's *nix or MSYS format). In case (3), returns the w32 file name
-# or path in func_cygpath_result (input file name or path is assumed to be in
-# Cygwin format). Returns an empty string on error.
-#
-# ARGS are passed to cygpath, with the last one being the file name or path to
-# be converted.
-#
-# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
-# environment variable; do not put it in $PATH.
-func_cygpath ()
-{
- $opt_debug
- if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
- func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
- if test "$?" -ne 0; then
- # on failure, ensure result is empty
- func_cygpath_result=
- fi
- else
- func_cygpath_result=
- func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
- fi
-}
-#end: func_cygpath
-
-
-# func_convert_core_msys_to_w32 ARG
-# Convert file name or path ARG from MSYS format to w32 format. Return
-# result in func_convert_core_msys_to_w32_result.
-func_convert_core_msys_to_w32 ()
-{
- $opt_debug
- # awkward: cmd appends spaces to result
- func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
-}
-#end: func_convert_core_msys_to_w32
-
-
-# func_convert_file_check ARG1 ARG2
-# Verify that ARG1 (a file name in $build format) was converted to $host
-# format in ARG2. Otherwise, emit an error message, but continue (resetting
-# func_to_host_file_result to ARG1).
-func_convert_file_check ()
-{
- $opt_debug
- if test -z "$2" && test -n "$1" ; then
- func_error "Could not determine host file name corresponding to"
- func_error " \`$1'"
- func_error "Continuing, but uninstalled executables may not work."
- # Fallback:
- func_to_host_file_result="$1"
- fi
-}
-# end func_convert_file_check
-
-
-# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
-# Verify that FROM_PATH (a path in $build format) was converted to $host
-# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
-# func_to_host_file_result to a simplistic fallback value (see below).
-func_convert_path_check ()
-{
- $opt_debug
- if test -z "$4" && test -n "$3"; then
- func_error "Could not determine the host path corresponding to"
- func_error " \`$3'"
- func_error "Continuing, but uninstalled executables may not work."
- # Fallback. This is a deliberately simplistic "conversion" and
- # should not be "improved". See libtool.info.
- if test "x$1" != "x$2"; then
- lt_replace_pathsep_chars="s|$1|$2|g"
- func_to_host_path_result=`echo "$3" |
- $SED -e "$lt_replace_pathsep_chars"`
- else
- func_to_host_path_result="$3"
- fi
- fi
-}
-# end func_convert_path_check
-
-
-# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
-# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
-# and appending REPL if ORIG matches BACKPAT.
-func_convert_path_front_back_pathsep ()
-{
- $opt_debug
- case $4 in
- $1 ) func_to_host_path_result="$3$func_to_host_path_result"
- ;;
- esac
- case $4 in
- $2 ) func_append func_to_host_path_result "$3"
- ;;
- esac
-}
-# end func_convert_path_front_back_pathsep
-
-
-##################################################
-# $build to $host FILE NAME CONVERSION FUNCTIONS #
-##################################################
-# invoked via `$to_host_file_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# Result will be available in $func_to_host_file_result.
-
-
-# func_to_host_file ARG
-# Converts the file name ARG from $build format to $host format. Return result
-# in func_to_host_file_result.
-func_to_host_file ()
-{
- $opt_debug
- $to_host_file_cmd "$1"
-}
-# end func_to_host_file
-
-
-# func_to_tool_file ARG LAZY
-# converts the file name ARG from $build format to toolchain format. Return
-# result in func_to_tool_file_result. If the conversion in use is listed
-# in (the comma separated) LAZY, no conversion takes place.
-func_to_tool_file ()
-{
- $opt_debug
- case ,$2, in
- *,"$to_tool_file_cmd",*)
- func_to_tool_file_result=$1
- ;;
- *)
- $to_tool_file_cmd "$1"
- func_to_tool_file_result=$func_to_host_file_result
- ;;
- esac
-}
-# end func_to_tool_file
-
-
-# func_convert_file_noop ARG
-# Copy ARG to func_to_host_file_result.
-func_convert_file_noop ()
-{
- func_to_host_file_result="$1"
-}
-# end func_convert_file_noop
-
-
-# func_convert_file_msys_to_w32 ARG
-# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper. Returns result in
-# func_to_host_file_result.
-func_convert_file_msys_to_w32 ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- func_convert_core_msys_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_msys_to_w32_result"
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_w32
-
-
-# func_convert_file_cygwin_to_w32 ARG
-# Convert file name ARG from Cygwin to w32 format. Returns result in
-# func_to_host_file_result.
-func_convert_file_cygwin_to_w32 ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
- # LT_CYGPATH in this case.
- func_to_host_file_result=`cygpath -m "$1"`
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_cygwin_to_w32
-
-
-# func_convert_file_nix_to_w32 ARG
-# Convert file name ARG from *nix to w32 format. Requires a wine environment
-# and a working winepath. Returns result in func_to_host_file_result.
-func_convert_file_nix_to_w32 ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- func_convert_core_file_wine_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_w32
-
-
-# func_convert_file_msys_to_cygwin ARG
-# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_file_msys_to_cygwin ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- func_convert_core_msys_to_w32 "$1"
- func_cygpath -u "$func_convert_core_msys_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_msys_to_cygwin
-
-
-# func_convert_file_nix_to_cygwin ARG
-# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
-# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
-# in func_to_host_file_result.
-func_convert_file_nix_to_cygwin ()
-{
- $opt_debug
- func_to_host_file_result="$1"
- if test -n "$1"; then
- # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
- func_convert_core_file_wine_to_w32 "$1"
- func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
- fi
- func_convert_file_check "$1" "$func_to_host_file_result"
-}
-# end func_convert_file_nix_to_cygwin
-
-
-#############################################
-# $build to $host PATH CONVERSION FUNCTIONS #
-#############################################
-# invoked via `$to_host_path_cmd ARG'
-#
-# In each case, ARG is the path to be converted from $build to $host format.
-# The result will be available in $func_to_host_path_result.
-#
-# Path separators are also converted from $build format to $host format. If
-# ARG begins or ends with a path separator character, it is preserved (but
-# converted to $host format) on output.
-#
-# All path conversion functions are named using the following convention:
-# file name conversion function : func_convert_file_X_to_Y ()
-# path conversion function : func_convert_path_X_to_Y ()
-# where, for any given $build/$host combination the 'X_to_Y' value is the
-# same. If conversion functions are added for new $build/$host combinations,
-# the two new functions must follow this pattern, or func_init_to_host_path_cmd
-# will break.
-
-
-# func_init_to_host_path_cmd
-# Ensures that function "pointer" variable $to_host_path_cmd is set to the
-# appropriate value, based on the value of $to_host_file_cmd.
-to_host_path_cmd=
-func_init_to_host_path_cmd ()
-{
- $opt_debug
- if test -z "$to_host_path_cmd"; then
- func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
- to_host_path_cmd="func_convert_path_${func_stripname_result}"
- fi
-}
-
-
-# func_to_host_path ARG
-# Converts the path ARG from $build format to $host format. Return result
-# in func_to_host_path_result.
-func_to_host_path ()
-{
- $opt_debug
- func_init_to_host_path_cmd
- $to_host_path_cmd "$1"
-}
-# end func_to_host_path
-
-
-# func_convert_path_noop ARG
-# Copy ARG to func_to_host_path_result.
-func_convert_path_noop ()
-{
- func_to_host_path_result="$1"
-}
-# end func_convert_path_noop
-
-
-# func_convert_path_msys_to_w32 ARG
-# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
-# conversion to w32 is not available inside the cwrapper. Returns result in
-# func_to_host_path_result.
-func_convert_path_msys_to_w32 ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # Remove leading and trailing path separator characters from ARG. MSYS
- # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
- # and winepath ignores them completely.
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_msys_to_w32_result"
- func_convert_path_check : ";" \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
- fi
-}
-# end func_convert_path_msys_to_w32
-
-
-# func_convert_path_cygwin_to_w32 ARG
-# Convert path ARG from Cygwin to w32 format. Returns result in
-# func_to_host_file_result.
-func_convert_path_cygwin_to_w32 ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # See func_convert_path_msys_to_w32:
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
- func_convert_path_check : ";" \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
- fi
-}
-# end func_convert_path_cygwin_to_w32
-
-
-# func_convert_path_nix_to_w32 ARG
-# Convert path ARG from *nix to w32 format. Requires a wine environment and
-# a working winepath. Returns result in func_to_host_file_result.
-func_convert_path_nix_to_w32 ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # See func_convert_path_msys_to_w32:
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
- func_convert_path_check : ";" \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
- fi
-}
-# end func_convert_path_nix_to_w32
-
-
-# func_convert_path_msys_to_cygwin ARG
-# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
-# Returns result in func_to_host_file_result.
-func_convert_path_msys_to_cygwin ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # See func_convert_path_msys_to_w32:
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
- func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
- func_convert_path_check : : \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" : "$1"
- fi
-}
-# end func_convert_path_msys_to_cygwin
-
-
-# func_convert_path_nix_to_cygwin ARG
-# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
-# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
-# func_to_host_file_result.
-func_convert_path_nix_to_cygwin ()
-{
- $opt_debug
- func_to_host_path_result="$1"
- if test -n "$1"; then
- # Remove leading and trailing path separator characters from
- # ARG. msys behavior is inconsistent here, cygpath turns them
- # into '.;' and ';.', and winepath ignores them completely.
- func_stripname : : "$1"
- func_to_host_path_tmp1=$func_stripname_result
- func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
- func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
- func_convert_path_check : : \
- "$func_to_host_path_tmp1" "$func_to_host_path_result"
- func_convert_path_front_back_pathsep ":*" "*:" : "$1"
- fi
-}
-# end func_convert_path_nix_to_cygwin
-
-
# func_mode_compile arg...
func_mode_compile ()
{
@@ -1985,12 +1137,12 @@ func_mode_compile ()
;;
-pie | -fpie | -fPIE)
- func_append pie_flag " $arg"
+ pie_flag="$pie_flag $arg"
continue
;;
-shared | -static | -prefer-pic | -prefer-non-pic)
- func_append later " $arg"
+ later="$later $arg"
continue
;;
@@ -2011,14 +1163,15 @@ func_mode_compile ()
save_ifs="$IFS"; IFS=','
for arg in $args; do
IFS="$save_ifs"
- func_append_quoted lastarg "$arg"
+ func_quote_for_eval "$arg"
+ lastarg="$lastarg $func_quote_for_eval_result"
done
IFS="$save_ifs"
func_stripname ' ' '' "$lastarg"
lastarg=$func_stripname_result
# Add the arguments to base_compile.
- func_append base_compile " $lastarg"
+ base_compile="$base_compile $lastarg"
continue
;;
@@ -2034,7 +1187,8 @@ func_mode_compile ()
esac # case $arg_mode
# Aesthetically quote the previous argument.
- func_append_quoted base_compile "$lastarg"
+ func_quote_for_eval "$lastarg"
+ base_compile="$base_compile $func_quote_for_eval_result"
done # for arg
case $arg_mode in
@@ -2059,7 +1213,7 @@ func_mode_compile ()
*.[cCFSifmso] | \
*.ada | *.adb | *.ads | *.asm | \
*.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
- *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
+ *.[fF][09]? | *.for | *.java | *.obj | *.sx)
func_xform "$libobj"
libobj=$func_xform_result
;;
@@ -2134,7 +1288,7 @@ func_mode_compile ()
# Calculate the filename of the output object if compiler does
# not support -o with -c
if test "$compiler_c_o" = no; then
- output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+ output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
lockfile="$output_obj.lock"
else
output_obj=
@@ -2165,16 +1319,17 @@ compiler."
$opt_dry_run || $RM $removelist
exit $EXIT_FAILURE
fi
- func_append removelist " $output_obj"
+ removelist="$removelist $output_obj"
$ECHO "$srcfile" > "$lockfile"
fi
$opt_dry_run || $RM $removelist
- func_append removelist " $lockfile"
+ removelist="$removelist $lockfile"
trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
- func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
- srcfile=$func_to_tool_file_result
+ if test -n "$fix_srcfile_path"; then
+ eval srcfile=\"$fix_srcfile_path\"
+ fi
func_quote_for_eval "$srcfile"
qsrcfile=$func_quote_for_eval_result
@@ -2194,7 +1349,7 @@ compiler."
if test -z "$output_obj"; then
# Place PIC objects in $objdir
- func_append command " -o $lobj"
+ command="$command -o $lobj"
fi
func_show_eval_locale "$command" \
@@ -2241,11 +1396,11 @@ compiler."
command="$base_compile $qsrcfile $pic_flag"
fi
if test "$compiler_c_o" = yes; then
- func_append command " -o $obj"
+ command="$command -o $obj"
fi
# Suppress compiler output if we already did a PIC compilation.
- func_append command "$suppress_output"
+ command="$command$suppress_output"
func_show_eval_locale "$command" \
'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
@@ -2290,13 +1445,13 @@ compiler."
}
$opt_help || {
- test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+test "$mode" = compile && func_mode_compile ${1+"$@"}
}
func_mode_help ()
{
# We need to display help for each of the modes.
- case $opt_mode in
+ case $mode in
"")
# Generic help is extracted from the usage comments
# at the start of this file.
@@ -2327,11 +1482,10 @@ This mode accepts the following additional options:
-o OUTPUT-FILE set the output file name to OUTPUT-FILE
-no-suppress do not suppress compiler output for multiple passes
- -prefer-pic try to build PIC objects only
- -prefer-non-pic try to build non-PIC objects only
+ -prefer-pic try to building PIC objects only
+ -prefer-non-pic try to building non-PIC objects only
-shared do not build a \`.o' file suitable for static linking
-static only build a \`.o' file suitable for static linking
- -Wc,FLAG pass FLAG directly to the compiler
COMPILE-COMMAND is a command to be used in creating a \`standard' object file
from the given SOURCEFILE.
@@ -2384,7 +1538,7 @@ either the \`install' or \`cp' program.
The following components of INSTALL-COMMAND are treated specially:
- -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+ -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
The rest of the components are interpreted as arguments to that command (only
BSD-compatible install options are recognized)."
@@ -2404,8 +1558,6 @@ The following components of LINK-COMMAND are treated specially:
-all-static do not do any dynamic linking at all
-avoid-version do not add a version suffix if possible
- -bindir BINDIR specify path to binaries directory (for systems where
- libraries must be found in the PATH setting at runtime)
-dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
@@ -2434,11 +1586,6 @@ The following components of LINK-COMMAND are treated specially:
-version-info CURRENT[:REVISION[:AGE]]
specify library version info [each variable defaults to 0]
-weak LIBNAME declare that the target provides the LIBNAME interface
- -Wc,FLAG
- -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
- -Wl,FLAG
- -Xlinker FLAG pass linker-specific FLAG directly to the linker
- -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
All other options (arguments beginning with \`-') are ignored.
@@ -2472,44 +1619,18 @@ Otherwise, only FILE itself is deleted using RM."
;;
*)
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode \`$mode'"
;;
esac
- echo
+ $ECHO
$ECHO "Try \`$progname --help' for more information about other modes."
+
+ exit $?
}
-# Now that we've collected a possible --mode arg, show help if necessary
-if $opt_help; then
- if test "$opt_help" = :; then
- func_mode_help
- else
- {
- func_help noexit
- for opt_mode in compile link execute install finish uninstall clean; do
- func_mode_help
- done
- } | sed -n '1p; 2,$s/^Usage:/ or: /p'
- {
- func_help noexit
- for opt_mode in compile link execute install finish uninstall clean; do
- echo
- func_mode_help
- done
- } |
- sed '1d
- /^When reporting/,/^Report/{
- H
- d
- }
- $x
- /information about other modes/d
- /more detailed .*MODE/d
- s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
- fi
- exit $?
-fi
+ # Now that we've collected a possible --mode arg, show help if necessary
+ $opt_help && func_mode_help
# func_mode_execute arg...
@@ -2522,16 +1643,13 @@ func_mode_execute ()
func_fatal_help "you must specify a COMMAND"
# Handle -dlopen flags immediately.
- for file in $opt_dlopen; do
+ for file in $execute_dlfiles; do
test -f "$file" \
|| func_fatal_help "\`$file' is not a file"
dir=
case $file in
*.la)
- func_resolve_sysroot "$file"
- file=$func_resolve_sysroot_result
-
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
|| func_fatal_help "\`$lib' is not a valid libtool archive"
@@ -2553,7 +1671,7 @@ func_mode_execute ()
dir="$func_dirname_result"
if test -f "$dir/$objdir/$dlname"; then
- func_append dir "/$objdir"
+ dir="$dir/$objdir"
else
if test ! -f "$dir/$dlname"; then
func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
@@ -2594,7 +1712,7 @@ func_mode_execute ()
for file
do
case $file in
- -* | *.la | *.lo ) ;;
+ -*) ;;
*)
# Do a test to see if this is really a libtool program.
if func_ltwrapper_script_p "$file"; then
@@ -2610,7 +1728,8 @@ func_mode_execute ()
;;
esac
# Quote arguments (to preserve shell metacharacters).
- func_append_quoted args "$file"
+ func_quote_for_eval "$file"
+ args="$args $func_quote_for_eval_result"
done
if test "X$opt_dry_run" = Xfalse; then
@@ -2633,68 +1752,31 @@ func_mode_execute ()
exec_cmd="\$cmd$args"
else
# Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
- echo "export $shlibpath_var"
- fi
- $ECHO "$cmd$args"
- exit $EXIT_SUCCESS
- fi
-}
-
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
-
-
-# func_mode_finish arg...
-func_mode_finish ()
-{
- $opt_debug
- libs=
- libdirs=
- admincmds=
-
- for opt in "$nonopt" ${1+"$@"}
- do
- if test -d "$opt"; then
- func_append libdirs " $opt"
-
- elif test -f "$opt"; then
- if func_lalib_unsafe_p "$opt"; then
- func_append libs " $opt"
- else
- func_warning "\`$opt' is not a valid libtool archive"
- fi
-
- else
- func_fatal_error "invalid argument \`$opt'"
- fi
- done
-
- if test -n "$libs"; then
- if test -n "$lt_sysroot"; then
- sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
- sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
- else
- sysroot_cmd=
- fi
-
- # Remove sysroot references
- if $opt_dry_run; then
- for lib in $libs; do
- echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
- done
- else
- tmpdir=`func_mktempdir`
- for lib in $libs; do
- sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
- > $tmpdir/tmp-la
- mv -f $tmpdir/tmp-la $lib
- done
- ${RM}r "$tmpdir"
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ $ECHO "export $shlibpath_var"
fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
fi
+}
+
+test "$mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $opt_debug
+ libdirs="$nonopt"
+ admincmds=
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for dir
+ do
+ libdirs="$libdirs $dir"
+ done
+
for libdir in $libdirs; do
if test -n "$finish_cmds"; then
# Do each command in the finish commands.
@@ -2704,7 +1786,7 @@ func_mode_finish ()
if test -n "$finish_eval"; then
# Do the single finish_eval.
eval cmds=\"$finish_eval\"
- $opt_dry_run || eval "$cmds" || func_append admincmds "
+ $opt_dry_run || eval "$cmds" || admincmds="$admincmds
$cmds"
fi
done
@@ -2713,55 +1795,53 @@ func_mode_finish ()
# Exit here if they wanted silent mode.
$opt_silent && exit $EXIT_SUCCESS
- if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
- echo "----------------------------------------------------------------------"
- echo "Libraries have been installed in:"
- for libdir in $libdirs; do
- $ECHO " $libdir"
- done
- echo
- echo "If you ever happen to want to link against installed libraries"
- echo "in a given directory, LIBDIR, you must either use libtool, and"
- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
- echo "flag during linking and do at least one of the following:"
- if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
- echo " during execution"
- fi
- if test -n "$runpath_var"; then
- echo " - add LIBDIR to the \`$runpath_var' environment variable"
- echo " during linking"
- fi
- if test -n "$hardcode_libdir_flag_spec"; then
- libdir=LIBDIR
- eval flag=\"$hardcode_libdir_flag_spec\"
-
- $ECHO " - use the \`$flag' linker flag"
- fi
- if test -n "$admincmds"; then
- $ECHO " - have your system administrator run these commands:$admincmds"
- fi
- if test -f /etc/ld.so.conf; then
- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
- fi
- echo
+ $ECHO "X----------------------------------------------------------------------" | $Xsed
+ $ECHO "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ $ECHO
+ $ECHO "If you ever happen to want to link against installed libraries"
+ $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+ $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ $ECHO "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ $ECHO " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ $ECHO " - add LIBDIR to the \`$runpath_var' environment variable"
+ $ECHO " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
- echo "See any operating system documentation about shared libraries for"
- case $host in
- solaris2.[6789]|solaris2.1[0-9])
- echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
- echo "pages."
- ;;
- *)
- echo "more information, such as the ld(1) and ld.so(8) manual pages."
- ;;
- esac
- echo "----------------------------------------------------------------------"
+ $ECHO " - use the \`$flag' linker flag"
fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ $ECHO
+
+ $ECHO "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ $ECHO "pages."
+ ;;
+ *)
+ $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ $ECHO "X----------------------------------------------------------------------" | $Xsed
exit $EXIT_SUCCESS
}
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+test "$mode" = finish && func_mode_finish ${1+"$@"}
# func_mode_install arg...
@@ -2772,7 +1852,7 @@ func_mode_install ()
# install_prog (especially on Windows NT).
if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
# Allow the use of GNU shtool's install command.
- case $nonopt in *shtool*) :;; *) false;; esac; then
+ $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
# Aesthetically quote it.
func_quote_for_eval "$nonopt"
install_prog="$func_quote_for_eval_result "
@@ -2786,12 +1866,7 @@ func_mode_install ()
# The real first argument should be the name of the installation program.
# Aesthetically quote it.
func_quote_for_eval "$arg"
- func_append install_prog "$func_quote_for_eval_result"
- install_shared_prog=$install_prog
- case " $install_prog " in
- *[\\\ /]cp\ *) install_cp=: ;;
- *) install_cp=false ;;
- esac
+ install_prog="$install_prog$func_quote_for_eval_result"
# We need to accept at least all the BSD install flags.
dest=
@@ -2801,12 +1876,10 @@ func_mode_install ()
install_type=
isdir=no
stripme=
- no_mode=:
for arg
do
- arg2=
if test -n "$dest"; then
- func_append files " $dest"
+ files="$files $dest"
dest=$arg
continue
fi
@@ -2814,9 +1887,10 @@ func_mode_install ()
case $arg in
-d) isdir=yes ;;
-f)
- if $install_cp; then :; else
- prev=$arg
- fi
+ case " $install_prog " in
+ *[\\\ /]cp\ *) ;;
+ *) prev=$arg ;;
+ esac
;;
-g | -m | -o)
prev=$arg
@@ -2830,10 +1904,6 @@ func_mode_install ()
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
- if test "x$prev" = x-m && test -n "$install_override_mode"; then
- arg2=$install_override_mode
- no_mode=false
- fi
prev=
else
dest=$arg
@@ -2844,11 +1914,7 @@ func_mode_install ()
# Aesthetically quote the argument.
func_quote_for_eval "$arg"
- func_append install_prog " $func_quote_for_eval_result"
- if test -n "$arg2"; then
- func_quote_for_eval "$arg2"
- fi
- func_append install_shared_prog " $func_quote_for_eval_result"
+ install_prog="$install_prog $func_quote_for_eval_result"
done
test -z "$install_prog" && \
@@ -2857,13 +1923,6 @@ func_mode_install ()
test -n "$prev" && \
func_fatal_help "the \`$prev' option requires an argument"
- if test -n "$install_override_mode" && $no_mode; then
- if $install_cp; then :; else
- func_quote_for_eval "$install_override_mode"
- func_append install_shared_prog " -m $func_quote_for_eval_result"
- fi
- fi
-
if test -z "$files"; then
if test -z "$dest"; then
func_fatal_help "no file or destination specified"
@@ -2918,13 +1977,10 @@ func_mode_install ()
case $file in
*.$libext)
# Do the static libraries later.
- func_append staticlibs " $file"
+ staticlibs="$staticlibs $file"
;;
*.la)
- func_resolve_sysroot "$file"
- file=$func_resolve_sysroot_result
-
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
|| func_fatal_help "\`$file' is not a valid libtool archive"
@@ -2938,23 +1994,23 @@ func_mode_install ()
if test "X$destdir" = "X$libdir"; then
case "$current_libdirs " in
*" $libdir "*) ;;
- *) func_append current_libdirs " $libdir" ;;
+ *) current_libdirs="$current_libdirs $libdir" ;;
esac
else
# Note the libdir as a future libdir.
case "$future_libdirs " in
*" $libdir "*) ;;
- *) func_append future_libdirs " $libdir" ;;
+ *) future_libdirs="$future_libdirs $libdir" ;;
esac
fi
func_dirname "$file" "/" ""
dir="$func_dirname_result"
- func_append dir "$objdir"
+ dir="$dir$objdir"
if test -n "$relink_command"; then
# Determine the prefix the user has applied to our future dir.
- inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+ inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
# Don't allow the user to place us outside of our expected
# location b/c this prevents finding dependent libraries that
@@ -2967,9 +2023,9 @@ func_mode_install ()
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
- relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
else
- relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
fi
func_warning "relinking \`$file'"
@@ -2987,7 +2043,7 @@ func_mode_install ()
test -n "$relink_command" && srcname="$realname"T
# Install the shared library and build the symlinks.
- func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+ func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
'exit $?'
tstripme="$stripme"
case $host_os in
@@ -3027,7 +2083,7 @@ func_mode_install ()
func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
# Maybe install the static library, too.
- test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
;;
*.lo)
@@ -3127,7 +2183,7 @@ func_mode_install ()
if test -f "$lib"; then
func_source "$lib"
fi
- libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
if test -n "$libdir" && test ! -f "$libfile"; then
func_warning "\`$lib' has not been installed in \`$libdir'"
finalize=no
@@ -3146,7 +2202,7 @@ func_mode_install ()
file="$func_basename_result"
outputname="$tmpdir/$file"
# Replace the output file specification.
- relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
$opt_silent || {
func_quote_for_expand "$relink_command"
@@ -3165,7 +2221,7 @@ func_mode_install ()
}
else
# Install the binary that we compiled earlier.
- file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
fi
fi
@@ -3224,7 +2280,7 @@ func_mode_install ()
fi
}
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
+test "$mode" = install && func_mode_install ${1+"$@"}
# func_generate_dlsyms outputname originator pic_p
@@ -3267,22 +2323,6 @@ func_generate_dlsyms ()
extern \"C\" {
#endif
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
-#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
-#endif
-
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
- relocations are performed -- see ld's documentation on pseudo-relocs. */
-# define LT_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data. */
-# define LT_DLSYM_CONST
-#else
-# define LT_DLSYM_CONST const
-#endif
-
/* External symbol declarations for the compiler. */\
"
@@ -3292,11 +2332,10 @@ extern \"C\" {
$opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
# Add our own program objects to the symbol list.
- progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
for progfile in $progfiles; do
- func_to_tool_file "$progfile" func_convert_file_msys_to_w32
- func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
- $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+ func_verbose "extracting global C symbols from \`$progfile'"
+ $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
done
if test -n "$exclude_expsyms"; then
@@ -3332,7 +2371,7 @@ extern \"C\" {
eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
case $host in
- *cygwin* | *mingw* | *cegcc* )
+ *cygwin | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
;;
@@ -3345,52 +2384,10 @@ extern \"C\" {
func_verbose "extracting global C symbols from \`$dlprefile'"
func_basename "$dlprefile"
name="$func_basename_result"
- case $host in
- *cygwin* | *mingw* | *cegcc* )
- # if an import library, we need to obtain dlname
- if func_win32_import_lib_p "$dlprefile"; then
- func_tr_sh "$dlprefile"
- eval "curr_lafile=\$libfile_$func_tr_sh_result"
- dlprefile_dlbasename=""
- if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
- # Use subshell, to avoid clobbering current variable values
- dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
- if test -n "$dlprefile_dlname" ; then
- func_basename "$dlprefile_dlname"
- dlprefile_dlbasename="$func_basename_result"
- else
- # no lafile. user explicitly requested -dlpreopen <import library>.
- $sharedlib_from_linklib_cmd "$dlprefile"
- dlprefile_dlbasename=$sharedlib_from_linklib_result
- fi
- fi
- $opt_dry_run || {
- if test -n "$dlprefile_dlbasename" ; then
- eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
- else
- func_warning "Could not compute DLL name from $name"
- eval '$ECHO ": $name " >> "$nlist"'
- fi
- func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
- eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
- $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
- }
- else # not an import lib
- $opt_dry_run || {
- eval '$ECHO ": $name " >> "$nlist"'
- func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
- eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
- }
- fi
- ;;
- *)
- $opt_dry_run || {
- eval '$ECHO ": $name " >> "$nlist"'
- func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
- eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
- }
- ;;
- esac
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
done
$opt_dry_run || {
@@ -3418,19 +2415,36 @@ extern \"C\" {
if test -f "$nlist"S; then
eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
else
- echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
fi
- echo >> "$output_objdir/$my_dlsyms" "\
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
/* The mapping between symbol names and symbols. */
typedef struct {
const char *name;
void *address;
} lt_dlsymlist;
-extern LT_DLSYM_CONST lt_dlsymlist
+"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* DATA imports from DLLs on WIN32 con't be const, because
+ runtime relocations are performed -- see ld's documentation
+ on pseudo-relocs. */"
+ lt_dlsym_const= ;;
+ *osf5*)
+ echo >> "$output_objdir/$my_dlsyms" "\
+/* This system does not cope well with relocations in const data */"
+ lt_dlsym_const= ;;
+ *)
+ lt_dlsym_const=const ;;
+ esac
+
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+extern $lt_dlsym_const lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[];
-LT_DLSYM_CONST lt_dlsymlist
+$lt_dlsym_const lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[] =
{\
{ \"$my_originator\", (void *) 0 },"
@@ -3443,7 +2457,7 @@ lt_${my_prefix}_LTX_preloaded_symbols[] =
eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
;;
esac
- echo >> "$output_objdir/$my_dlsyms" "\
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
{0, (void *) 0}
};
@@ -3486,7 +2500,7 @@ static const void *lt_preloaded_setup() {
for arg in $LTCFLAGS; do
case $arg in
-pie | -fpie | -fPIE) ;;
- *) func_append symtab_cflags " $arg" ;;
+ *) symtab_cflags="$symtab_cflags $arg" ;;
esac
done
@@ -3501,16 +2515,16 @@ static const void *lt_preloaded_setup() {
case $host in
*cygwin* | *mingw* | *cegcc* )
if test -f "$output_objdir/$my_outputname.def"; then
- compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
- finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
else
- compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
- finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
fi
;;
*)
- compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
- finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
;;
esac
;;
@@ -3524,8 +2538,8 @@ static const void *lt_preloaded_setup() {
# really was required.
# Nullify the symbol file.
- compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
- finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
fi
}
@@ -3535,7 +2549,6 @@ static const void *lt_preloaded_setup() {
# Need a lot of goo to handle *both* DLLs and import libs
# Has to be a shell function in order to 'eat' the argument
# that is supplied when $file_magic_command is called.
-# Despite the name, also deal with 64 bit binaries.
func_win32_libid ()
{
$opt_debug
@@ -3546,11 +2559,9 @@ func_win32_libid ()
win32_libid_type="x86 archive import"
;;
*ar\ archive*) # could be an import, or static
- # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
- $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+ win32_nmres=`eval $NM -f posix -A $1 |
$SED -n -e '
1,100{
/ I /{
@@ -3579,131 +2590,6 @@ func_win32_libid ()
$ECHO "$win32_libid_type"
}
-# func_cygming_dll_for_implib ARG
-#
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-# Invoked by eval'ing the libtool variable
-# $sharedlib_from_linklib_cmd
-# Result is available in the variable
-# $sharedlib_from_linklib_result
-func_cygming_dll_for_implib ()
-{
- $opt_debug
- sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
-}
-
-# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
-#
-# The is the core of a fallback implementation of a
-# platform-specific function to extract the name of the
-# DLL associated with the specified import library LIBNAME.
-#
-# SECTION_NAME is either .idata$6 or .idata$7, depending
-# on the platform and compiler that created the implib.
-#
-# Echos the name of the DLL associated with the
-# specified import library.
-func_cygming_dll_for_implib_fallback_core ()
-{
- $opt_debug
- match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
- $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
- $SED '/^Contents of section '"$match_literal"':/{
- # Place marker at beginning of archive member dllname section
- s/.*/====MARK====/
- p
- d
- }
- # These lines can sometimes be longer than 43 characters, but
- # are always uninteresting
- /:[ ]*file format pe[i]\{,1\}-/d
- /^In archive [^:]*:/d
- # Ensure marker is printed
- /^====MARK====/p
- # Remove all lines with less than 43 characters
- /^.\{43\}/!d
- # From remaining lines, remove first 43 characters
- s/^.\{43\}//' |
- $SED -n '
- # Join marker and all lines until next marker into a single line
- /^====MARK====/ b para
- H
- $ b para
- b
- :para
- x
- s/\n//g
- # Remove the marker
- s/^====MARK====//
- # Remove trailing dots and whitespace
- s/[\. \t]*$//
- # Print
- /./p' |
- # we now have a list, one entry per line, of the stringified
- # contents of the appropriate section of all members of the
- # archive which possess that section. Heuristic: eliminate
- # all those which have a first or second character that is
- # a '.' (that is, objdump's representation of an unprintable
- # character.) This should work for all archives with less than
- # 0x302f exports -- but will fail for DLLs whose name actually
- # begins with a literal '.' or a single character followed by
- # a '.'.
- #
- # Of those that remain, print the first one.
- $SED -e '/^\./d;/^.\./d;q'
-}
-
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
- test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
- test -n "$func_cygming_ms_implib_tmp"
-}
-
-# func_cygming_dll_for_implib_fallback ARG
-# Platform-specific function to extract the
-# name of the DLL associated with the specified
-# import library ARG.
-#
-# This fallback implementation is for use when $DLLTOOL
-# does not support the --identify-strict option.
-# Invoked by eval'ing the libtool variable
-# $sharedlib_from_linklib_cmd
-# Result is available in the variable
-# $sharedlib_from_linklib_result
-func_cygming_dll_for_implib_fallback ()
-{
- $opt_debug
- if func_cygming_gnu_implib_p "$1" ; then
- # binutils import library
- sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
- elif func_cygming_ms_implib_p "$1" ; then
- # ms-generated import library
- sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
- else
- # unknown
- sharedlib_from_linklib_result=""
- fi
-}
# func_extract_an_archive dir oldlib
@@ -3712,18 +2598,7 @@ func_extract_an_archive ()
$opt_debug
f_ex_an_ar_dir="$1"; shift
f_ex_an_ar_oldlib="$1"
- if test "$lock_old_archive_extraction" = yes; then
- lockfile=$f_ex_an_ar_oldlib.lock
- until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
- func_echo "Waiting for $lockfile to be removed"
- sleep 2
- done
- fi
- func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
- 'stat=$?; rm -f "$lockfile"; exit $stat'
- if test "$lock_old_archive_extraction" = yes; then
- $opt_dry_run || rm -f "$lockfile"
- fi
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
:
else
@@ -3794,7 +2669,7 @@ func_extract_archives ()
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
- darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
$LIPO -create -output "$darwin_file" $darwin_files
done # $darwin_filelist
$RM -rf unfat-$$
@@ -3809,30 +2684,25 @@ func_extract_archives ()
func_extract_an_archive "$my_xdir" "$my_xabs"
;;
esac
- my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
done
func_extract_archives_result="$my_oldobjs"
}
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable. Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
+
+# func_emit_wrapper_part1 [arg=no]
#
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take. If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory. This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
{
- func_emit_wrapper_arg1=${1-no}
+ func_emit_wrapper_part1_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_part1_arg1=$1
+ fi
$ECHO "\
#! $SHELL
@@ -3848,6 +2718,7 @@ func_emit_wrapper ()
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
sed_quote_subst='$sed_quote_subst'
# Be Bourne compatible
@@ -3878,132 +2749,31 @@ if test \"\$libtool_install_magic\" = \"$magic\"; then
else
# When we are sourced in execute mode, \$file and \$ECHO are already set.
if test \"\$libtool_execute_magic\" != \"$magic\"; then
- file=\"\$0\""
-
- qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
- $ECHO "\
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-\$1
-_LTECHO_EOF'
-}
- ECHO=\"$qECHO\"
- fi
-
-# Very basic option parsing. These options are (a) specific to
-# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
-# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
-# this pattern).
-#
-# There are only two supported options: --lt-debug and
-# --lt-dump-script. There is, deliberately, no --lt-help.
-#
-# The first argument to this parsing function should be the
-# script's $0 value, followed by "$@".
-lt_option_debug=
-func_parse_lt_options ()
-{
- lt_script_arg0=\$0
- shift
- for lt_opt
- do
- case \"\$lt_opt\" in
- --lt-debug) lt_option_debug=1 ;;
- --lt-dump-script)
- lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
- test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
- lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
- cat \"\$lt_dump_D/\$lt_dump_F\"
- exit 0
- ;;
- --lt-*)
- \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
- exit 1
- ;;
- esac
- done
-
- # Print the debug banner immediately:
- if test -n \"\$lt_option_debug\"; then
- echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
- fi
-}
-
-# Used when --lt-debug. Prints its arguments to stdout
-# (redirection is the responsibility of the caller)
-func_lt_dump_args ()
-{
- lt_dump_args_N=1;
- for lt_arg
- do
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
- lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
- done
-}
-
-# Core function for launching the target application
-func_exec_program_core ()
-{
-"
- case $host in
- # Backslashes separate directories on plain windows
- *-*-mingw | *-*-os2* | *-cegcc*)
- $ECHO "\
- if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
- func_lt_dump_args \${1+\"\$@\"} 1>&2
- fi
- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
- ;;
-
- *)
- $ECHO "\
- if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
- func_lt_dump_args \${1+\"\$@\"} 1>&2
- fi
- exec \"\$progdir/\$program\" \${1+\"\$@\"}
+ ECHO=\"$qecho\"
+ file=\"\$0\"
+ # Make sure echo works.
+ if test \"X\$1\" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+ elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+ # Yippee, \$ECHO works!
+ :
+ else
+ # Restart under the correct shell, and then maybe \$ECHO will work.
+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+ fi
+ fi\
"
- ;;
- esac
- $ECHO "\
- \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
- exit 1
-}
-
-# A function to encapsulate launching the target application
-# Strips options in the --lt-* namespace from \$@ and
-# launches target application with the remaining arguments.
-func_exec_program ()
-{
- for lt_wr_arg
- do
- case \$lt_wr_arg in
- --lt-*) ;;
- *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
- esac
- shift
- done
- func_exec_program_core \${1+\"\$@\"}
-}
-
- # Parse options
- func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+ $ECHO "\
# Find the directory that this script lives in.
- thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+ thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
test \"x\$thisdir\" = \"x\$file\" && thisdir=.
# Follow symbolic links until we get to the real thisdir.
- file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
while test -n \"\$file\"; do
- destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+ destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
# If there was a directory component, then change thisdir.
if test \"x\$destdir\" != \"x\$file\"; then
@@ -4013,13 +2783,30 @@ func_exec_program ()
esac
fi
- file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
- file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+ file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+ func_emit_wrapper_part2_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_part2_arg1=$1
+ fi
+
+ $ECHO "\
# Usually 'no', except on cygwin/mingw when embedded into
# the cwrapper.
- WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
# special case for '.'
if test \"\$thisdir\" = \".\"; then
@@ -4027,7 +2814,7 @@ func_exec_program ()
fi
# remove .libs from thisdir
case \"\$thisdir\" in
- *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
$objdir ) thisdir=. ;;
esac
fi
@@ -4082,18 +2869,6 @@ func_exec_program ()
if test -f \"\$progdir/\$program\"; then"
- # fixup the dll searchpath if we need to.
- #
- # Fix the DLL searchpath if we need to. Do this before prepending
- # to shlibpath, because on Windows, both are PATH and uninstalled
- # libraries must come first.
- if test -n "$dllsearchpath"; then
- $ECHO "\
- # Add the dll search path components to the executable PATH
- PATH=$dllsearchpath:\$PATH
-"
- fi
-
# Export our shlibpath_var if we have one.
if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
$ECHO "\
@@ -4102,28 +2877,253 @@ func_exec_program ()
# Some systems cannot cope with colon-terminated $shlibpath_var
# The second colon is a workaround for a bug in BeOS R4 sed
- $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+ $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
export $shlibpath_var
"
fi
+ # fixup the dll searchpath if we need to.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
$ECHO "\
if test \"\$libtool_execute_magic\" != \"$magic\"; then
# Run the actual program with our arguments.
- func_exec_program \${1+\"\$@\"}
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
fi
else
# The program doesn't exist.
\$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
\$ECHO \"This script is just a wrapper for \$program.\" 1>&2
- \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
exit 1
fi
fi\
"
}
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_arg1=$1
+ fi
+
+ # split this up so that func_emit_cwrapperexe_src
+ # can call each part independently.
+ func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+ func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
+
+
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+# $build $host
+# mingw (msys) mingw [e.g. native]
+# cygwin mingw
+# *nix + wine mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin. Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+ func_to_host_path_result="$1"
+ if test -n "$1" ; then
+ case $host in
+ *mingw* )
+ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+ case $build in
+ *mingw* ) # actually, msys
+ # awkward: cmd appends spaces to result
+ lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+ func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ *cygwin* )
+ func_to_host_path_tmp1=`cygpath -w "$1"`
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ * )
+ # Unfortunately, winepath does not exit with a non-zero
+ # error code, so we are forced to check the contents of
+ # stdout. On the other hand, if the command is not
+ # found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both
+ # error code of zero AND non-empty stdout, which explains
+ # the odd construction:
+ func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ # Allow warning below.
+ func_to_host_path_result=""
+ fi
+ ;;
+ esac
+ if test -z "$func_to_host_path_result" ; then
+ func_error "Could not determine host path corresponding to"
+ func_error " '$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_path_result="$1"
+ fi
+ ;;
+ esac
+ fi
+}
+# end: func_to_host_path
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+# $build $host
+# mingw (msys) mingw [e.g. native]
+# cygwin mingw
+# *nix + wine mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+ func_to_host_pathlist_result="$1"
+ if test -n "$1" ; then
+ case $host in
+ *mingw* )
+ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_to_host_pathlist_tmp2="$1"
+ # Once set for this call, this variable should not be
+ # reassigned. It is used in tha fallback case.
+ func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+ $SED -e 's|^:*||' -e 's|:*$||'`
+ case $build in
+ *mingw* ) # Actually, msys.
+ # Awkward: cmd appends spaces to result.
+ lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+ func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ *cygwin* )
+ func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ * )
+ # unfortunately, winepath doesn't convert pathlists
+ func_to_host_pathlist_result=""
+ func_to_host_pathlist_oldIFS=$IFS
+ IFS=:
+ for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+ IFS=$func_to_host_pathlist_oldIFS
+ if test -n "$func_to_host_pathlist_f" ; then
+ func_to_host_path "$func_to_host_pathlist_f"
+ if test -n "$func_to_host_path_result" ; then
+ if test -z "$func_to_host_pathlist_result" ; then
+ func_to_host_pathlist_result="$func_to_host_path_result"
+ else
+ func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+ fi
+ fi
+ fi
+ IFS=:
+ done
+ IFS=$func_to_host_pathlist_oldIFS
+ ;;
+ esac
+ if test -z "$func_to_host_pathlist_result" ; then
+ func_error "Could not determine the host path(s) corresponding to"
+ func_error " '$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This may break if $1 contains DOS-style drive
+ # specifications. The fix is not to complicate the expression
+ # below, but for the user to provide a working wine installation
+ # with winepath so that path translation in the cross-to-mingw
+ # case works properly.
+ lt_replace_pathsep_nix_to_dos="s|:|;|g"
+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+ $SED -e "$lt_replace_pathsep_nix_to_dos"`
+ fi
+ # Now, add the leading and trailing path separators back
+ case "$1" in
+ :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+ ;;
+ esac
+ case "$1" in
+ *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+}
+# end: func_to_host_pathlist
# func_emit_cwrapperexe_src
# emit the source code for a wrapper executable on stdout
@@ -4141,23 +3141,31 @@ func_emit_cwrapperexe_src ()
This wrapper executable should never be moved out of the build directory.
If it is, it will not operate correctly.
+
+ Currently, it simply execs the wrapper *script* "$SHELL $output",
+ but could eventually absorb all of the scripts functionality and
+ exec $objdir/$outputname directly.
*/
EOF
cat <<"EOF"
-#ifdef _MSC_VER
-# define _CRT_SECURE_NO_DEPRECATE 1
-#endif
#include <stdio.h>
#include <stdlib.h>
#ifdef _MSC_VER
# include <direct.h>
# include <process.h>
# include <io.h>
+# define setmode _setmode
#else
# include <unistd.h>
# include <stdint.h>
# ifdef __CYGWIN__
# include <io.h>
+# define HAVE_SETENV
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
# endif
#endif
#include <malloc.h>
@@ -4169,44 +3177,6 @@ EOF
#include <fcntl.h>
#include <sys/stat.h>
-/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
-# ifdef __STRICT_ANSI__
-int _putenv (const char *);
-# endif
-#elif defined(__CYGWIN__)
-# ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-# endif
-/* #elif defined (other platforms) ... */
-#endif
-
-/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
-# define setmode _setmode
-# define stat _stat
-# define chmod _chmod
-# define getcwd _getcwd
-# define putenv _putenv
-# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-# define _INTPTR_T_DEFINED
-# define intptr_t int
-# endif
-#elif defined(__MINGW32__)
-# define setmode _setmode
-# define stat _stat
-# define chmod _chmod
-# define getcwd _getcwd
-# define putenv _putenv
-#elif defined(__CYGWIN__)
-# define HAVE_SETENV
-# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
-#endif
-
#if defined(PATH_MAX)
# define LT_PATHMAX PATH_MAX
#elif defined(MAXPATHLEN)
@@ -4222,7 +3192,14 @@ int setenv (const char *, const char *, int);
# define S_IXGRP 0
#endif
-/* path handling portability macros */
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#endif
+
#ifndef DIR_SEPARATOR
# define DIR_SEPARATOR '/'
# define PATH_SEPARATOR ':'
@@ -4253,6 +3230,10 @@ int setenv (const char *, const char *, int);
# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
#endif /* PATH_SEPARATOR_2 */
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
+
#ifndef FOPEN_WB
# define FOPEN_WB "w"
#endif
@@ -4265,13 +3246,22 @@ int setenv (const char *, const char *, int);
if (stale) { free ((void *) stale); stale = 0; } \
} while (0)
-#if defined(LT_DEBUGWRAPPER)
-static int lt_debug = 1;
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+ va_list args;
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+}
#else
-static int lt_debug = 0;
+# define LTWRAPPER_DEBUGPRINTF(args)
#endif
-const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+const char *program_name = NULL;
void *xmalloc (size_t num);
char *xstrdup (const char *string);
@@ -4281,27 +3271,41 @@ char *chase_symlinks (const char *pathspec);
int make_executable (const char *path);
int check_executable (const char *path);
char *strendzap (char *str, const char *pat);
-void lt_debugprintf (const char *file, int line, const char *fmt, ...);
-void lt_fatal (const char *file, int line, const char *message, ...);
-static const char *nonnull (const char *s);
-static const char *nonempty (const char *s);
+void lt_fatal (const char *message, ...);
void lt_setenv (const char *name, const char *value);
char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
void lt_update_exe_path (const char *name, const char *value);
void lt_update_lib_path (const char *name, const char *value);
-char **prepare_spawn (char **argv);
-void lt_dump_script (FILE *f);
+
+static const char *script_text_part1 =
+EOF
+
+ func_emit_wrapper_part1 yes |
+ $SED -e 's/\([\\"]\)/\\\1/g' \
+ -e 's/^/ "/' -e 's/$/\\n"/'
+ echo ";"
+ cat <<EOF
+
+static const char *script_text_part2 =
EOF
+ func_emit_wrapper_part2 yes |
+ $SED -e 's/\([\\"]\)/\\\1/g' \
+ -e 's/^/ "/' -e 's/$/\\n"/'
+ echo ";"
cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
+const char * MAGIC_EXE = "$magic_exe";
const char * LIB_PATH_VARNAME = "$shlibpath_var";
EOF
if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
- func_to_host_path "$temp_rpath"
+ func_to_host_pathlist "$temp_rpath"
cat <<EOF
-const char * LIB_PATH_VALUE = "$func_to_host_path_result";
+const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result";
EOF
else
cat <<"EOF"
@@ -4310,10 +3314,10 @@ EOF
fi
if test -n "$dllsearchpath"; then
- func_to_host_path "$dllsearchpath:"
+ func_to_host_pathlist "$dllsearchpath:"
cat <<EOF
const char * EXE_PATH_VARNAME = "PATH";
-const char * EXE_PATH_VALUE = "$func_to_host_path_result";
+const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result";
EOF
else
cat <<"EOF"
@@ -4336,10 +3340,24 @@ EOF
cat <<"EOF"
#define LTWRAPPER_OPTION_PREFIX "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH 5
+static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH;
static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+
static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
-static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
+
+static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set";
+ /* argument is putenv-style "foo=bar", value of foo is set to bar */
+
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend";
+ /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+
+static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append";
+ /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
int
main (int argc, char *argv[])
@@ -4356,13 +3374,10 @@ main (int argc, char *argv[])
int i;
program_name = (char *) xstrdup (base_name (argv[0]));
- newargz = XMALLOC (char *, argc + 1);
+ LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0]));
+ LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
- /* very simple arg parsing; don't want to rely on getopt
- * also, copy all non cwrapper options to newargz, except
- * argz[0], which is handled differently
- */
- newargc=0;
+ /* very simple arg parsing; don't want to rely on getopt */
for (i = 1; i < argc; i++)
{
if (strcmp (argv[i], dumpscript_opt) == 0)
@@ -4376,57 +3391,25 @@ EOF
esac
cat <<"EOF"
- lt_dump_script (stdout);
+ printf ("%s", script_text_part1);
+ printf ("%s", script_text_part2);
return 0;
}
- if (strcmp (argv[i], debug_opt) == 0)
- {
- lt_debug = 1;
- continue;
- }
- if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
- {
- /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
- namespace, but it is not one of the ones we know about and
- have already dealt with, above (inluding dump-script), then
- report an error. Otherwise, targets might begin to believe
- they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
- namespace. The first time any user complains about this, we'll
- need to make LTWRAPPER_OPTION_PREFIX a configure-time option
- or a configure.ac-settable value.
- */
- lt_fatal (__FILE__, __LINE__,
- "unrecognized %s option: '%s'",
- ltwrapper_option_prefix, argv[i]);
- }
- /* otherwise ... */
- newargz[++newargc] = xstrdup (argv[i]);
}
- newargz[++newargc] = NULL;
-
-EOF
- cat <<EOF
- /* The GNU banner must be the first non-error debug message */
- lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
-EOF
- cat <<"EOF"
- lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
- lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+ newargz = XMALLOC (char *, argc + 1);
tmp_pathspec = find_executable (argv[0]);
if (tmp_pathspec == NULL)
- lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
- lt_debugprintf (__FILE__, __LINE__,
- "(main) found exe (before symlink chase) at: %s\n",
- tmp_pathspec);
+ lt_fatal ("Couldn't find %s", argv[0]);
+ LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+ tmp_pathspec));
actual_cwrapper_path = chase_symlinks (tmp_pathspec);
- lt_debugprintf (__FILE__, __LINE__,
- "(main) found exe (after symlink chase) at: %s\n",
- actual_cwrapper_path);
+ LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+ actual_cwrapper_path));
XFREE (tmp_pathspec);
- actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+ actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
strendzap (actual_cwrapper_path, actual_cwrapper_name);
/* wrapper name transforms */
@@ -4444,9 +3427,8 @@ EOF
target_name = tmp_pathspec;
tmp_pathspec = 0;
- lt_debugprintf (__FILE__, __LINE__,
- "(main) libtool target name: %s\n",
- target_name);
+ LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+ target_name));
EOF
cat <<EOF
@@ -4496,19 +3478,80 @@ EOF
lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
lt_setenv ("DUALCASE", "1"); /* for MSK sh */
- /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
- be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
- because on Windows, both *_VARNAMEs are PATH but uninstalled
- libraries must come first. */
- lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+ {
+ if (argv[i][env_set_opt_len] == '=')
+ {
+ const char *p = argv[i] + env_set_opt_len + 1;
+ lt_opt_process_env_set (p);
+ }
+ else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+ {
+ lt_opt_process_env_set (argv[++i]); /* don't copy */
+ }
+ else
+ lt_fatal ("%s missing required argument", env_set_opt);
+ continue;
+ }
+ if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+ {
+ if (argv[i][env_prepend_opt_len] == '=')
+ {
+ const char *p = argv[i] + env_prepend_opt_len + 1;
+ lt_opt_process_env_prepend (p);
+ }
+ else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+ {
+ lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+ }
+ else
+ lt_fatal ("%s missing required argument", env_prepend_opt);
+ continue;
+ }
+ if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+ {
+ if (argv[i][env_append_opt_len] == '=')
+ {
+ const char *p = argv[i] + env_append_opt_len + 1;
+ lt_opt_process_env_append (p);
+ }
+ else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+ {
+ lt_opt_process_env_append (argv[++i]); /* don't copy */
+ }
+ else
+ lt_fatal ("%s missing required argument", env_append_opt);
+ continue;
+ }
+ if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal ("Unrecognized option in %s namespace: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
- lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
- nonnull (lt_argv_zero));
+ LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
for (i = 0; i < newargc; i++)
{
- lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
- i, nonnull (newargz[i]));
+ LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
}
EOF
@@ -4517,14 +3560,11 @@ EOF
mingw*)
cat <<"EOF"
/* execv doesn't actually work on mingw as expected on unix */
- newargz = prepare_spawn (newargz);
rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
if (rval == -1)
{
/* failed to start process */
- lt_debugprintf (__FILE__, __LINE__,
- "(main) failed to launch target \"%s\": %s\n",
- lt_argv_zero, nonnull (strerror (errno)));
+ LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
return 127;
}
return rval;
@@ -4546,7 +3586,7 @@ xmalloc (size_t num)
{
void *p = (void *) malloc (num);
if (!p)
- lt_fatal (__FILE__, __LINE__, "memory exhausted");
+ lt_fatal ("Memory exhausted");
return p;
}
@@ -4580,8 +3620,8 @@ check_executable (const char *path)
{
struct stat st;
- lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
- nonempty (path));
+ LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n",
+ path ? (*path ? path : "EMPTY!") : "NULL!"));
if ((!path) || (!*path))
return 0;
@@ -4598,8 +3638,8 @@ make_executable (const char *path)
int rval = 0;
struct stat st;
- lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
- nonempty (path));
+ LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n",
+ path ? (*path ? path : "EMPTY!") : "NULL!"));
if ((!path) || (!*path))
return 0;
@@ -4625,8 +3665,8 @@ find_executable (const char *wrapper)
int tmp_len;
char *concat_name;
- lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
- nonempty (wrapper));
+ LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n",
+ wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
if ((wrapper == NULL) || (*wrapper == '\0'))
return NULL;
@@ -4679,8 +3719,7 @@ find_executable (const char *wrapper)
{
/* empty path: current directory */
if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
- nonnull (strerror (errno)));
+ lt_fatal ("getcwd failed");
tmp_len = strlen (tmp);
concat_name =
XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
@@ -4705,8 +3744,7 @@ find_executable (const char *wrapper)
}
/* Relative path | not found in path: prepend cwd */
if (getcwd (tmp, LT_PATHMAX) == NULL)
- lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
- nonnull (strerror (errno)));
+ lt_fatal ("getcwd failed");
tmp_len = strlen (tmp);
concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
memcpy (concat_name, tmp, tmp_len);
@@ -4732,9 +3770,8 @@ chase_symlinks (const char *pathspec)
int has_symlinks = 0;
while (strlen (tmp_pathspec) && !has_symlinks)
{
- lt_debugprintf (__FILE__, __LINE__,
- "checking path component for symlinks: %s\n",
- tmp_pathspec);
+ LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+ tmp_pathspec));
if (lstat (tmp_pathspec, &s) == 0)
{
if (S_ISLNK (s.st_mode) != 0)
@@ -4756,9 +3793,8 @@ chase_symlinks (const char *pathspec)
}
else
{
- lt_fatal (__FILE__, __LINE__,
- "error accessing file \"%s\": %s",
- tmp_pathspec, nonnull (strerror (errno)));
+ char *errstr = strerror (errno);
+ lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
}
}
XFREE (tmp_pathspec);
@@ -4771,8 +3807,7 @@ chase_symlinks (const char *pathspec)
tmp_pathspec = realpath (pathspec, buf);
if (tmp_pathspec == 0)
{
- lt_fatal (__FILE__, __LINE__,
- "could not follow symlinks for %s", pathspec);
+ lt_fatal ("Could not follow symlinks for %s", pathspec);
}
return xstrdup (tmp_pathspec);
#endif
@@ -4798,25 +3833,11 @@ strendzap (char *str, const char *pat)
return str;
}
-void
-lt_debugprintf (const char *file, int line, const char *fmt, ...)
-{
- va_list args;
- if (lt_debug)
- {
- (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
- va_start (args, fmt);
- (void) vfprintf (stderr, fmt, args);
- va_end (args);
- }
-}
-
static void
-lt_error_core (int exit_status, const char *file,
- int line, const char *mode,
+lt_error_core (int exit_status, const char *mode,
const char *message, va_list ap)
{
- fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+ fprintf (stderr, "%s: %s: ", program_name, mode);
vfprintf (stderr, message, ap);
fprintf (stderr, ".\n");
@@ -4825,32 +3846,20 @@ lt_error_core (int exit_status, const char *file,
}
void
-lt_fatal (const char *file, int line, const char *message, ...)
+lt_fatal (const char *message, ...)
{
va_list ap;
va_start (ap, message);
- lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+ lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
va_end (ap);
}
-static const char *
-nonnull (const char *s)
-{
- return s ? s : "(null)";
-}
-
-static const char *
-nonempty (const char *s)
-{
- return (s && !*s) ? "(empty)" : nonnull (s);
-}
-
void
lt_setenv (const char *name, const char *value)
{
- lt_debugprintf (__FILE__, __LINE__,
- "(lt_setenv) setting '%s' to '%s'\n",
- nonnull (name), nonnull (value));
+ LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+ (name ? name : "<NULL>"),
+ (value ? value : "<NULL>")));
{
#ifdef HAVE_SETENV
/* always make a copy, for consistency with !HAVE_SETENV */
@@ -4895,12 +3904,95 @@ lt_extend_str (const char *orig_value, const char *add, int to_end)
return new_value;
}
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+ const char *p;
+ int len;
+ if (!arg || !*arg)
+ return 1;
+
+ p = strchr (arg, (int)'=');
+
+ if (!p)
+ return 1;
+
+ *value = xstrdup (++p);
+
+ len = strlen (arg) - strlen (*value);
+ *name = XMALLOC (char, len);
+ strncpy (*name, arg, len-1);
+ (*name)[len - 1] = '\0';
+
+ return 0;
+}
+
+void
+lt_opt_process_env_set (const char *arg)
+{
+ char *name = NULL;
+ char *value = NULL;
+
+ if (lt_split_name_value (arg, &name, &value) != 0)
+ {
+ XFREE (name);
+ XFREE (value);
+ lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+ }
+
+ lt_setenv (name, value);
+ XFREE (name);
+ XFREE (value);
+}
+
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+ char *name = NULL;
+ char *value = NULL;
+ char *new_value = NULL;
+
+ if (lt_split_name_value (arg, &name, &value) != 0)
+ {
+ XFREE (name);
+ XFREE (value);
+ lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+ }
+
+ new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ XFREE (name);
+ XFREE (value);
+}
+
+void
+lt_opt_process_env_append (const char *arg)
+{
+ char *name = NULL;
+ char *value = NULL;
+ char *new_value = NULL;
+
+ if (lt_split_name_value (arg, &name, &value) != 0)
+ {
+ XFREE (name);
+ XFREE (value);
+ lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+ }
+
+ new_value = lt_extend_str (getenv (name), value, 1);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ XFREE (name);
+ XFREE (value);
+}
+
void
lt_update_exe_path (const char *name, const char *value)
{
- lt_debugprintf (__FILE__, __LINE__,
- "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
- nonnull (name), nonnull (value));
+ LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ (name ? name : "<NULL>"),
+ (value ? value : "<NULL>")));
if (name && *name && value && *value)
{
@@ -4919,9 +4011,9 @@ lt_update_exe_path (const char *name, const char *value)
void
lt_update_lib_path (const char *name, const char *value)
{
- lt_debugprintf (__FILE__, __LINE__,
- "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
- nonnull (name), nonnull (value));
+ LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ (name ? name : "<NULL>"),
+ (value ? value : "<NULL>")));
if (name && *name && value && *value)
{
@@ -4931,152 +4023,11 @@ lt_update_lib_path (const char *name, const char *value)
}
}
-EOF
- case $host_os in
- mingw*)
- cat <<"EOF"
-
-/* Prepares an argument vector before calling spawn().
- Note that spawn() does not by itself call the command interpreter
- (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
- ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
- GetVersionEx(&v);
- v.dwPlatformId == VER_PLATFORM_WIN32_NT;
- }) ? "cmd.exe" : "command.com").
- Instead it simply concatenates the arguments, separated by ' ', and calls
- CreateProcess(). We must quote the arguments since Win32 CreateProcess()
- interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
- special way:
- - Space and tab are interpreted as delimiters. They are not treated as
- delimiters if they are surrounded by double quotes: "...".
- - Unescaped double quotes are removed from the input. Their only effect is
- that within double quotes, space and tab are treated like normal
- characters.
- - Backslashes not followed by double quotes are not special.
- - But 2*n+1 backslashes followed by a double quote become
- n backslashes followed by a double quote (n >= 0):
- \" -> "
- \\\" -> \"
- \\\\\" -> \\"
- */
-#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
-char **
-prepare_spawn (char **argv)
-{
- size_t argc;
- char **new_argv;
- size_t i;
-
- /* Count number of arguments. */
- for (argc = 0; argv[argc] != NULL; argc++)
- ;
-
- /* Allocate new argument vector. */
- new_argv = XMALLOC (char *, argc + 1);
-
- /* Put quoted arguments into the new argument vector. */
- for (i = 0; i < argc; i++)
- {
- const char *string = argv[i];
-
- if (string[0] == '\0')
- new_argv[i] = xstrdup ("\"\"");
- else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
- {
- int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
- size_t length;
- unsigned int backslashes;
- const char *s;
- char *quoted_string;
- char *p;
-
- length = 0;
- backslashes = 0;
- if (quote_around)
- length++;
- for (s = string; *s != '\0'; s++)
- {
- char c = *s;
- if (c == '"')
- length += backslashes + 1;
- length++;
- if (c == '\\')
- backslashes++;
- else
- backslashes = 0;
- }
- if (quote_around)
- length += backslashes + 1;
-
- quoted_string = XMALLOC (char, length + 1);
-
- p = quoted_string;
- backslashes = 0;
- if (quote_around)
- *p++ = '"';
- for (s = string; *s != '\0'; s++)
- {
- char c = *s;
- if (c == '"')
- {
- unsigned int j;
- for (j = backslashes + 1; j > 0; j--)
- *p++ = '\\';
- }
- *p++ = c;
- if (c == '\\')
- backslashes++;
- else
- backslashes = 0;
- }
- if (quote_around)
- {
- unsigned int j;
- for (j = backslashes; j > 0; j--)
- *p++ = '\\';
- *p++ = '"';
- }
- *p = '\0';
-
- new_argv[i] = quoted_string;
- }
- else
- new_argv[i] = (char *) string;
- }
- new_argv[argc] = NULL;
-
- return new_argv;
-}
-EOF
- ;;
- esac
-
- cat <<"EOF"
-void lt_dump_script (FILE* f)
-{
-EOF
- func_emit_wrapper yes |
- $SED -e 's/\([\\"]\)/\\\1/g' \
- -e 's/^/ fputs ("/' -e 's/$/\\n", f);/'
- cat <<"EOF"
-}
EOF
}
# end: func_emit_cwrapperexe_src
-# func_win32_import_lib_p ARG
-# True if ARG is an import lib, as indicated by $file_magic_cmd
-func_win32_import_lib_p ()
-{
- $opt_debug
- case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
- *import*) : ;;
- *) false ;;
- esac
-}
-
# func_mode_link arg...
func_mode_link ()
{
@@ -5121,7 +4072,6 @@ func_mode_link ()
new_inherited_linker_flags=
avoid_version=no
- bindir=
dlfiles=
dlprefiles=
dlself=no
@@ -5214,11 +4164,6 @@ func_mode_link ()
esac
case $prev in
- bindir)
- bindir="$arg"
- prev=
- continue
- ;;
dlfiles|dlprefiles)
if test "$preload" = no; then
# Add the symbol object into the linking commands.
@@ -5250,9 +4195,9 @@ func_mode_link ()
;;
*)
if test "$prev" = dlfiles; then
- func_append dlfiles " $arg"
+ dlfiles="$dlfiles $arg"
else
- func_append dlprefiles " $arg"
+ dlprefiles="$dlprefiles $arg"
fi
prev=
continue
@@ -5276,7 +4221,7 @@ func_mode_link ()
*-*-darwin*)
case "$deplibs " in
*" $qarg.ltframework "*) ;;
- *) func_append deplibs " $qarg.ltframework" # this is fixed later
+ *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
;;
esac
;;
@@ -5295,7 +4240,7 @@ func_mode_link ()
moreargs=
for fil in `cat "$save_arg"`
do
-# func_append moreargs " $fil"
+# moreargs="$moreargs $fil"
arg=$fil
# A libtool-controlled object.
@@ -5324,7 +4269,7 @@ func_mode_link ()
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- func_append dlfiles " $pic_object"
+ dlfiles="$dlfiles $pic_object"
prev=
continue
else
@@ -5336,7 +4281,7 @@ func_mode_link ()
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
- func_append dlprefiles " $pic_object"
+ dlprefiles="$dlprefiles $pic_object"
prev=
fi
@@ -5406,12 +4351,12 @@ func_mode_link ()
if test "$prev" = rpath; then
case "$rpath " in
*" $arg "*) ;;
- *) func_append rpath " $arg" ;;
+ *) rpath="$rpath $arg" ;;
esac
else
case "$xrpath " in
*" $arg "*) ;;
- *) func_append xrpath " $arg" ;;
+ *) xrpath="$xrpath $arg" ;;
esac
fi
prev=
@@ -5423,28 +4368,28 @@ func_mode_link ()
continue
;;
weak)
- func_append weak_libs " $arg"
+ weak_libs="$weak_libs $arg"
prev=
continue
;;
xcclinker)
- func_append linker_flags " $qarg"
- func_append compiler_flags " $qarg"
+ linker_flags="$linker_flags $qarg"
+ compiler_flags="$compiler_flags $qarg"
prev=
func_append compile_command " $qarg"
func_append finalize_command " $qarg"
continue
;;
xcompiler)
- func_append compiler_flags " $qarg"
+ compiler_flags="$compiler_flags $qarg"
prev=
func_append compile_command " $qarg"
func_append finalize_command " $qarg"
continue
;;
xlinker)
- func_append linker_flags " $qarg"
- func_append compiler_flags " $wl$qarg"
+ linker_flags="$linker_flags $qarg"
+ compiler_flags="$compiler_flags $wl$qarg"
prev=
func_append compile_command " $wl$qarg"
func_append finalize_command " $wl$qarg"
@@ -5480,11 +4425,6 @@ func_mode_link ()
continue
;;
- -bindir)
- prev=bindir
- continue
- ;;
-
-dlopen)
prev=dlfiles
continue
@@ -5535,16 +4475,15 @@ func_mode_link ()
;;
-L*)
- func_stripname "-L" '' "$arg"
- if test -z "$func_stripname_result"; then
+ func_stripname '-L' '' "$arg"
+ dir=$func_stripname_result
+ if test -z "$dir"; then
if test "$#" -gt 0; then
func_fatal_error "require no space between \`-L' and \`$1'"
else
func_fatal_error "need path for \`-L' option"
fi
fi
- func_resolve_sysroot "$func_stripname_result"
- dir=$func_resolve_sysroot_result
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -5556,30 +4495,24 @@ func_mode_link ()
;;
esac
case "$deplibs " in
- *" -L$dir "* | *" $arg "*)
- # Will only happen for absolute or sysroot arguments
- ;;
+ *" -L$dir "*) ;;
*)
- # Preserve sysroot, but never include relative directories
- case $dir in
- [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
- *) func_append deplibs " -L$dir" ;;
- esac
- func_append lib_search_path " $dir"
+ deplibs="$deplibs -L$dir"
+ lib_search_path="$lib_search_path $dir"
;;
esac
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+ testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$dir:"*) ;;
::) dllsearchpath=$dir;;
- *) func_append dllsearchpath ":$dir";;
+ *) dllsearchpath="$dllsearchpath:$dir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
::) dllsearchpath=$testbindir;;
- *) func_append dllsearchpath ":$testbindir";;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
esac
;;
esac
@@ -5589,7 +4522,7 @@ func_mode_link ()
-l*)
if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
# These systems don't actually have a C or math library (as such)
continue
;;
@@ -5603,7 +4536,7 @@ func_mode_link ()
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
- func_append deplibs " System.ltframework"
+ deplibs="$deplibs System.ltframework"
continue
;;
*-*-sco3.2v5* | *-*-sco5v6*)
@@ -5623,7 +4556,7 @@ func_mode_link ()
;;
esac
fi
- func_append deplibs " $arg"
+ deplibs="$deplibs $arg"
continue
;;
@@ -5635,8 +4568,8 @@ func_mode_link ()
# Tru64 UNIX uses -model [arg] to determine the layout of C++
# classes, name mangling, and exception handling.
# Darwin uses the -arch flag to determine output architecture.
- -model|-arch|-isysroot|--sysroot)
- func_append compiler_flags " $arg"
+ -model|-arch|-isysroot)
+ compiler_flags="$compiler_flags $arg"
func_append compile_command " $arg"
func_append finalize_command " $arg"
prev=xcompiler
@@ -5644,12 +4577,12 @@ func_mode_link ()
;;
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
- func_append compiler_flags " $arg"
+ compiler_flags="$compiler_flags $arg"
func_append compile_command " $arg"
func_append finalize_command " $arg"
case "$new_inherited_linker_flags " in
*" $arg "*) ;;
- * ) func_append new_inherited_linker_flags " $arg" ;;
+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
esac
continue
;;
@@ -5716,17 +4649,13 @@ func_mode_link ()
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
- =*)
- func_stripname '=' '' "$dir"
- dir=$lt_sysroot$func_stripname_result
- ;;
*)
func_fatal_error "only absolute run-paths are allowed"
;;
esac
case "$xrpath " in
*" $dir "*) ;;
- *) func_append xrpath " $dir" ;;
+ *) xrpath="$xrpath $dir" ;;
esac
continue
;;
@@ -5779,8 +4708,8 @@ func_mode_link ()
for flag in $args; do
IFS="$save_ifs"
func_quote_for_eval "$flag"
- func_append arg " $func_quote_for_eval_result"
- func_append compiler_flags " $func_quote_for_eval_result"
+ arg="$arg $wl$func_quote_for_eval_result"
+ compiler_flags="$compiler_flags $func_quote_for_eval_result"
done
IFS="$save_ifs"
func_stripname ' ' '' "$arg"
@@ -5795,9 +4724,9 @@ func_mode_link ()
for flag in $args; do
IFS="$save_ifs"
func_quote_for_eval "$flag"
- func_append arg " $wl$func_quote_for_eval_result"
- func_append compiler_flags " $wl$func_quote_for_eval_result"
- func_append linker_flags " $func_quote_for_eval_result"
+ arg="$arg $wl$func_quote_for_eval_result"
+ compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
+ linker_flags="$linker_flags $func_quote_for_eval_result"
done
IFS="$save_ifs"
func_stripname ' ' '' "$arg"
@@ -5825,27 +4754,23 @@ func_mode_link ()
arg="$func_quote_for_eval_result"
;;
- # Flags to be passed through unchanged, with rationale:
- # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
- # -r[0-9][0-9]* specify processor for the SGI compiler
- # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
- # +DA*, +DD* enable 64-bit mode for the HP compiler
- # -q* compiler args for the IBM compiler
- # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
- # -F/path path to uninstalled frameworks, gcc on darwin
- # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
- # @file GCC response files
- # -tp=* Portland pgcc target processor selection
- # --sysroot=* for sysroot support
- # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+ # -r[0-9][0-9]* specifies the processor on the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+ # +DA*, +DD* enable 64-bit mode on the HP compiler
+ # -q* pass through compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* pass through architecture-specific
+ # compiler args for GCC
+ # -F/path gives path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+ # @file GCC response files
-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
- -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
func_quote_for_eval "$arg"
arg="$func_quote_for_eval_result"
func_append compile_command " $arg"
func_append finalize_command " $arg"
- func_append compiler_flags " $arg"
+ compiler_flags="$compiler_flags $arg"
continue
;;
@@ -5857,7 +4782,7 @@ func_mode_link ()
*.$objext)
# A standard object.
- func_append objs " $arg"
+ objs="$objs $arg"
;;
*.lo)
@@ -5888,7 +4813,7 @@ func_mode_link ()
if test "$prev" = dlfiles; then
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
- func_append dlfiles " $pic_object"
+ dlfiles="$dlfiles $pic_object"
prev=
continue
else
@@ -5900,7 +4825,7 @@ func_mode_link ()
# CHECK ME: I think I busted this. -Ossama
if test "$prev" = dlprefiles; then
# Preload the old-style object.
- func_append dlprefiles " $pic_object"
+ dlprefiles="$dlprefiles $pic_object"
prev=
fi
@@ -5945,25 +4870,24 @@ func_mode_link ()
*.$libext)
# An archive.
- func_append deplibs " $arg"
- func_append old_deplibs " $arg"
+ deplibs="$deplibs $arg"
+ old_deplibs="$old_deplibs $arg"
continue
;;
*.la)
# A libtool-controlled library.
- func_resolve_sysroot "$arg"
if test "$prev" = dlfiles; then
# This library was specified with -dlopen.
- func_append dlfiles " $func_resolve_sysroot_result"
+ dlfiles="$dlfiles $arg"
prev=
elif test "$prev" = dlprefiles; then
# The library was specified with -dlpreopen.
- func_append dlprefiles " $func_resolve_sysroot_result"
+ dlprefiles="$dlprefiles $arg"
prev=
else
- func_append deplibs " $func_resolve_sysroot_result"
+ deplibs="$deplibs $arg"
fi
continue
;;
@@ -6001,7 +4925,7 @@ func_mode_link ()
if test -n "$shlibpath_var"; then
# get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
else
shlib_search_path=
fi
@@ -6010,8 +4934,6 @@ func_mode_link ()
func_dirname "$output" "/" ""
output_objdir="$func_dirname_result$objdir"
- func_to_tool_file "$output_objdir/"
- tool_output_objdir=$func_to_tool_file_result
# Create the object directory.
func_mkdir_p "$output_objdir"
@@ -6032,12 +4954,12 @@ func_mode_link ()
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
for deplib in $deplibs; do
- if $opt_preserve_dup_deps ; then
+ if $opt_duplicate_deps ; then
case "$libs " in
- *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
esac
fi
- func_append libs " $deplib"
+ libs="$libs $deplib"
done
if test "$linkmode" = lib; then
@@ -6050,9 +4972,9 @@ func_mode_link ()
if $opt_duplicate_compiler_generated_deps; then
for pre_post_dep in $predeps $postdeps; do
case "$pre_post_deps " in
- *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
esac
- func_append pre_post_deps " $pre_post_dep"
+ pre_post_deps="$pre_post_deps $pre_post_dep"
done
fi
pre_post_deps=
@@ -6122,19 +5044,17 @@ func_mode_link ()
for lib in $dlprefiles; do
# Ignore non-libtool-libs
dependency_libs=
- func_resolve_sysroot "$lib"
case $lib in
- *.la) func_source "$func_resolve_sysroot_result" ;;
+ *.la) func_source "$lib" ;;
esac
# Collect preopened libtool deplibs, except any this library
# has declared as weak libs
for deplib in $dependency_libs; do
- func_basename "$deplib"
- deplib_base=$func_basename_result
+ deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
case " $weak_libs " in
*" $deplib_base "*) ;;
- *) func_append deplibs " $deplib" ;;
+ *) deplibs="$deplibs $deplib" ;;
esac
done
done
@@ -6155,11 +5075,11 @@ func_mode_link ()
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- func_append compiler_flags " $deplib"
+ compiler_flags="$compiler_flags $deplib"
if test "$linkmode" = lib ; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
- * ) func_append new_inherited_linker_flags " $deplib" ;;
+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
esac
fi
fi
@@ -6244,7 +5164,7 @@ func_mode_link ()
if test "$linkmode" = lib ; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
- * ) func_append new_inherited_linker_flags " $deplib" ;;
+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
esac
fi
fi
@@ -6257,8 +5177,7 @@ func_mode_link ()
test "$pass" = conv && continue
newdependency_libs="$deplib $newdependency_libs"
func_stripname '-L' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result"
- func_append newlib_search_path " $func_resolve_sysroot_result"
+ newlib_search_path="$newlib_search_path $func_stripname_result"
;;
prog)
if test "$pass" = conv; then
@@ -6272,8 +5191,7 @@ func_mode_link ()
finalize_deplibs="$deplib $finalize_deplibs"
fi
func_stripname '-L' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result"
- func_append newlib_search_path " $func_resolve_sysroot_result"
+ newlib_search_path="$newlib_search_path $func_stripname_result"
;;
*)
func_warning "\`-L' is ignored for archives/objects"
@@ -6284,21 +5202,17 @@ func_mode_link ()
-R*)
if test "$pass" = link; then
func_stripname '-R' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result"
- dir=$func_resolve_sysroot_result
+ dir=$func_stripname_result
# Make sure the xrpath contains only unique directories.
case "$xrpath " in
*" $dir "*) ;;
- *) func_append xrpath " $dir" ;;
+ *) xrpath="$xrpath $dir" ;;
esac
fi
deplibs="$deplib $deplibs"
continue
;;
- *.la)
- func_resolve_sysroot "$deplib"
- lib=$func_resolve_sysroot_result
- ;;
+ *.la) lib="$deplib" ;;
*.$libext)
if test "$pass" = conv; then
deplibs="$deplib $deplibs"
@@ -6316,7 +5230,7 @@ func_mode_link ()
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
- if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+ if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
valid_a_lib=yes
fi
@@ -6326,15 +5240,15 @@ func_mode_link ()
;;
esac
if test "$valid_a_lib" != yes; then
- echo
+ $ECHO
$ECHO "*** Warning: Trying to link with static lib archive $deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have"
- echo "*** because the file extensions .$libext of this argument makes me believe"
- echo "*** that it is just a static archive that I should not use here."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have"
+ $ECHO "*** because the file extensions .$libext of this argument makes me believe"
+ $ECHO "*** that it is just a static archive that I should not use here."
else
- echo
+ $ECHO
$ECHO "*** Warning: Linking the shared library $output against the"
$ECHO "*** static library $deplib is not portable!"
deplibs="$deplib $deplibs"
@@ -6361,11 +5275,11 @@ func_mode_link ()
if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
- func_append newdlprefiles " $deplib"
+ newdlprefiles="$newdlprefiles $deplib"
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
- func_append newdlfiles " $deplib"
+ newdlfiles="$newdlfiles $deplib"
fi
fi
continue
@@ -6407,20 +5321,20 @@ func_mode_link ()
# Convert "-framework foo" to "foo.ltframework"
if test -n "$inherited_linker_flags"; then
- tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
case " $new_inherited_linker_flags " in
*" $tmp_inherited_linker_flag "*) ;;
- *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+ *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
esac
done
fi
- dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
if test "$linkmode,$pass" = "lib,link" ||
test "$linkmode,$pass" = "prog,scan" ||
{ test "$linkmode" != prog && test "$linkmode" != lib; }; then
- test -n "$dlopen" && func_append dlfiles " $dlopen"
- test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
fi
if test "$pass" = conv; then
@@ -6431,17 +5345,17 @@ func_mode_link ()
func_fatal_error "cannot find name of link library for \`$lib'"
fi
# It is a libtool convenience library, so add in its objects.
- func_append convenience " $ladir/$objdir/$old_library"
- func_append old_convenience " $ladir/$objdir/$old_library"
+ convenience="$convenience $ladir/$objdir/$old_library"
+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
tmp_libs=
for deplib in $dependency_libs; do
deplibs="$deplib $deplibs"
- if $opt_preserve_dup_deps ; then
+ if $opt_duplicate_deps ; then
case "$tmp_libs " in
- *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
esac
fi
- func_append tmp_libs " $deplib"
+ tmp_libs="$tmp_libs $deplib"
done
elif test "$linkmode" != prog && test "$linkmode" != lib; then
func_fatal_error "\`$lib' is not a convenience library"
@@ -6452,15 +5366,9 @@ func_mode_link ()
# Get the name of the library we link against.
linklib=
- if test -n "$old_library" &&
- { test "$prefer_static_libs" = yes ||
- test "$prefer_static_libs,$installed" = "built,no"; }; then
- linklib=$old_library
- else
- for l in $old_library $library_names; do
- linklib="$l"
- done
- fi
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
if test -z "$linklib"; then
func_fatal_error "cannot find name of link library for \`$lib'"
fi
@@ -6477,9 +5385,9 @@ func_mode_link ()
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
# bomb out in the load deplibs phase.
- func_append dlprefiles " $lib $dependency_libs"
+ dlprefiles="$dlprefiles $lib $dependency_libs"
else
- func_append newdlfiles " $lib"
+ newdlfiles="$newdlfiles $lib"
fi
continue
fi # $pass = dlopen
@@ -6501,14 +5409,14 @@ func_mode_link ()
# Find the relevant object directory and library name.
if test "X$installed" = Xyes; then
- if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
func_warning "library \`$lib' was moved."
dir="$ladir"
absdir="$abs_ladir"
libdir="$abs_ladir"
else
- dir="$lt_sysroot$libdir"
- absdir="$lt_sysroot$libdir"
+ dir="$libdir"
+ absdir="$libdir"
fi
test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
else
@@ -6516,12 +5424,12 @@ func_mode_link ()
dir="$ladir"
absdir="$abs_ladir"
# Remove this search path later
- func_append notinst_path " $abs_ladir"
+ notinst_path="$notinst_path $abs_ladir"
else
dir="$ladir/$objdir"
absdir="$abs_ladir/$objdir"
# Remove this search path later
- func_append notinst_path " $abs_ladir"
+ notinst_path="$notinst_path $abs_ladir"
fi
fi # $installed = yes
func_stripname 'lib' '.la' "$laname"
@@ -6532,46 +5440,20 @@ func_mode_link ()
if test -z "$libdir" && test "$linkmode" = prog; then
func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
fi
- case "$host" in
- # special handling for platforms with PE-DLLs.
- *cygwin* | *mingw* | *cegcc* )
- # Linker will automatically link against shared library if both
- # static and shared are present. Therefore, ensure we extract
- # symbols from the import library if a shared library is present
- # (otherwise, the dlopen module name will be incorrect). We do
- # this by putting the import library name into $newdlprefiles.
- # We recover the dlopen module name by 'saving' the la file
- # name in a special purpose variable, and (later) extracting the
- # dlname from the la file.
- if test -n "$dlname"; then
- func_tr_sh "$dir/$linklib"
- eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
- func_append newdlprefiles " $dir/$linklib"
- else
- func_append newdlprefiles " $dir/$old_library"
- # Keep a list of preopened convenience libraries to check
- # that they are being used correctly in the link pass.
- test -z "$libdir" && \
- func_append dlpreconveniencelibs " $dir/$old_library"
- fi
- ;;
- * )
- # Prefer using a static library (so that no silly _DYNAMIC symbols
- # are required to link).
- if test -n "$old_library"; then
- func_append newdlprefiles " $dir/$old_library"
- # Keep a list of preopened convenience libraries to check
- # that they are being used correctly in the link pass.
- test -z "$libdir" && \
- func_append dlpreconveniencelibs " $dir/$old_library"
- # Otherwise, use the dlname, so that lt_dlopen finds it.
- elif test -n "$dlname"; then
- func_append newdlprefiles " $dir/$dlname"
- else
- func_append newdlprefiles " $dir/$linklib"
- fi
- ;;
- esac
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ newdlprefiles="$newdlprefiles $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ newdlprefiles="$newdlprefiles $dir/$dlname"
+ else
+ newdlprefiles="$newdlprefiles $dir/$linklib"
+ fi
fi # $pass = dlpreopen
if test -z "$libdir"; then
@@ -6589,7 +5471,7 @@ func_mode_link ()
if test "$linkmode" = prog && test "$pass" != link; then
- func_append newlib_search_path " $ladir"
+ newlib_search_path="$newlib_search_path $ladir"
deplibs="$lib $deplibs"
linkalldeplibs=no
@@ -6602,8 +5484,7 @@ func_mode_link ()
for deplib in $dependency_libs; do
case $deplib in
-L*) func_stripname '-L' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result"
- func_append newlib_search_path " $func_resolve_sysroot_result"
+ newlib_search_path="$newlib_search_path $func_stripname_result"
;;
esac
# Need to link against all dependency_libs?
@@ -6614,12 +5495,12 @@ func_mode_link ()
# or/and link against static libraries
newdependency_libs="$deplib $newdependency_libs"
fi
- if $opt_preserve_dup_deps ; then
+ if $opt_duplicate_deps ; then
case "$tmp_libs " in
- *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
esac
fi
- func_append tmp_libs " $deplib"
+ tmp_libs="$tmp_libs $deplib"
done # for deplib
continue
fi # $linkmode = prog...
@@ -6634,7 +5515,7 @@ func_mode_link ()
# Make sure the rpath contains only unique directories.
case "$temp_rpath:" in
*"$absdir:"*) ;;
- *) func_append temp_rpath "$absdir:" ;;
+ *) temp_rpath="$temp_rpath$absdir:" ;;
esac
fi
@@ -6646,7 +5527,7 @@ func_mode_link ()
*)
case "$compile_rpath " in
*" $absdir "*) ;;
- *) func_append compile_rpath " $absdir" ;;
+ *) compile_rpath="$compile_rpath $absdir"
esac
;;
esac
@@ -6655,7 +5536,7 @@ func_mode_link ()
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) func_append finalize_rpath " $libdir" ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
esac
;;
esac
@@ -6680,12 +5561,12 @@ func_mode_link ()
case $host in
*cygwin* | *mingw* | *cegcc*)
# No point in relinking DLLs because paths are not encoded
- func_append notinst_deplibs " $lib"
+ notinst_deplibs="$notinst_deplibs $lib"
need_relink=no
;;
*)
if test "$installed" = no; then
- func_append notinst_deplibs " $lib"
+ notinst_deplibs="$notinst_deplibs $lib"
need_relink=yes
fi
;;
@@ -6702,7 +5583,7 @@ func_mode_link ()
fi
done
if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
- echo
+ $ECHO
if test "$linkmode" = prog; then
$ECHO "*** Warning: Linking the executable $output against the loadable module"
else
@@ -6720,7 +5601,7 @@ func_mode_link ()
*)
case "$compile_rpath " in
*" $absdir "*) ;;
- *) func_append compile_rpath " $absdir" ;;
+ *) compile_rpath="$compile_rpath $absdir"
esac
;;
esac
@@ -6729,7 +5610,7 @@ func_mode_link ()
*)
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) func_append finalize_rpath " $libdir" ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
esac
;;
esac
@@ -6783,7 +5664,7 @@ func_mode_link ()
linklib=$newlib
fi # test -n "$old_archive_from_expsyms_cmds"
- if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ if test "$linkmode" = prog || test "$mode" != relink; then
add_shlibpath=
add_dir=
add=
@@ -6805,9 +5686,9 @@ func_mode_link ()
if test "X$dlopenmodule" != "X$lib"; then
$ECHO "*** Warning: lib $linklib is a module, not a shared library"
if test -z "$old_library" ; then
- echo
- echo "*** And there doesn't seem to be a static archive available"
- echo "*** The link will probably fail, sorry"
+ $ECHO
+ $ECHO "*** And there doesn't seem to be a static archive available"
+ $ECHO "*** The link will probably fail, sorry"
else
add="$dir/$old_library"
fi
@@ -6839,7 +5720,7 @@ func_mode_link ()
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
- func_append add_dir " -L$inst_prefix_dir$libdir"
+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
esac
fi
@@ -6861,7 +5742,7 @@ func_mode_link ()
if test -n "$add_shlibpath"; then
case :$compile_shlibpath: in
*":$add_shlibpath:"*) ;;
- *) func_append compile_shlibpath "$add_shlibpath:" ;;
+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
esac
fi
if test "$linkmode" = prog; then
@@ -6875,13 +5756,13 @@ func_mode_link ()
test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
- *) func_append finalize_shlibpath "$libdir:" ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
esac
fi
fi
fi
- if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ if test "$linkmode" = prog || test "$mode" = relink; then
add_shlibpath=
add_dir=
add=
@@ -6895,7 +5776,7 @@ func_mode_link ()
elif test "$hardcode_shlibpath_var" = yes; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
- *) func_append finalize_shlibpath "$libdir:" ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
esac
add="-l$name"
elif test "$hardcode_automatic" = yes; then
@@ -6912,7 +5793,7 @@ func_mode_link ()
if test -n "$inst_prefix_dir"; then
case $libdir in
[\\/]*)
- func_append add_dir " -L$inst_prefix_dir$libdir"
+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
;;
esac
fi
@@ -6947,21 +5828,21 @@ func_mode_link ()
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
- echo
+ $ECHO
$ECHO "*** Warning: This system can not link to static lib archive $lib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have."
if test "$module" = yes; then
- echo "*** But as you try to build a module library, libtool will still create "
- echo "*** a static module, that should work as long as the dlopening application"
- echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ $ECHO "*** But as you try to build a module library, libtool will still create "
+ $ECHO "*** a static module, that should work as long as the dlopening application"
+ $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
- echo
- echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ $ECHO
+ $ECHO "*** However, this would only work if libtool was able to extract symbol"
+ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ $ECHO "*** not find such a program. So, this module is probably useless."
+ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
build_libtool_libs=module
@@ -6989,33 +5870,27 @@ func_mode_link ()
temp_xrpath=$func_stripname_result
case " $xrpath " in
*" $temp_xrpath "*) ;;
- *) func_append xrpath " $temp_xrpath";;
+ *) xrpath="$xrpath $temp_xrpath";;
esac;;
- *) func_append temp_deplibs " $libdir";;
+ *) temp_deplibs="$temp_deplibs $libdir";;
esac
done
dependency_libs="$temp_deplibs"
fi
- func_append newlib_search_path " $absdir"
+ newlib_search_path="$newlib_search_path $absdir"
# Link against this library
test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
# ... and its dependency_libs
tmp_libs=
for deplib in $dependency_libs; do
newdependency_libs="$deplib $newdependency_libs"
- case $deplib in
- -L*) func_stripname '-L' '' "$deplib"
- func_resolve_sysroot "$func_stripname_result";;
- *) func_resolve_sysroot "$deplib" ;;
- esac
- if $opt_preserve_dup_deps ; then
+ if $opt_duplicate_deps ; then
case "$tmp_libs " in
- *" $func_resolve_sysroot_result "*)
- func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
esac
fi
- func_append tmp_libs " $func_resolve_sysroot_result"
+ tmp_libs="$tmp_libs $deplib"
done
if test "$link_all_deplibs" != no; then
@@ -7025,10 +5900,8 @@ func_mode_link ()
case $deplib in
-L*) path="$deplib" ;;
*.la)
- func_resolve_sysroot "$deplib"
- deplib=$func_resolve_sysroot_result
func_dirname "$deplib" "" "."
- dir=$func_dirname_result
+ dir="$func_dirname_result"
# We need an absolute path.
case $dir in
[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
@@ -7055,8 +5928,8 @@ func_mode_link ()
if test -z "$darwin_install_name"; then
darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
fi
- func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
- func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+ linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
path=
fi
fi
@@ -7089,7 +5962,7 @@ func_mode_link ()
compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
else
- compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
fi
fi
dependency_libs="$newdependency_libs"
@@ -7106,7 +5979,7 @@ func_mode_link ()
for dir in $newlib_search_path; do
case "$lib_search_path " in
*" $dir "*) ;;
- *) func_append lib_search_path " $dir" ;;
+ *) lib_search_path="$lib_search_path $dir" ;;
esac
done
newlib_search_path=
@@ -7164,10 +6037,10 @@ func_mode_link ()
-L*)
case " $tmp_libs " in
*" $deplib "*) ;;
- *) func_append tmp_libs " $deplib" ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
esac
;;
- *) func_append tmp_libs " $deplib" ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
esac
done
eval $var=\"$tmp_libs\"
@@ -7183,7 +6056,7 @@ func_mode_link ()
;;
esac
if test -n "$i" ; then
- func_append tmp_libs " $i"
+ tmp_libs="$tmp_libs $i"
fi
done
dependency_libs=$tmp_libs
@@ -7224,7 +6097,7 @@ func_mode_link ()
# Now set the variables for building old libraries.
build_libtool_libs=no
oldlibs="$output"
- func_append objs "$old_deplibs"
+ objs="$objs$old_deplibs"
;;
lib)
@@ -7257,10 +6130,10 @@ func_mode_link ()
if test "$deplibs_check_method" != pass_all; then
func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
else
- echo
+ $ECHO
$ECHO "*** Warning: Linking the shared library $output against the non-libtool"
$ECHO "*** objects $objs is not portable!"
- func_append libobjs " $objs"
+ libobjs="$libobjs $objs"
fi
fi
@@ -7325,7 +6198,7 @@ func_mode_link ()
age="$number_minor"
revision="$number_revision"
;;
- freebsd-aout|freebsd-elf|qnx|sunos)
+ freebsd-aout|freebsd-elf|sunos)
current="$number_major"
revision="$number_minor"
age="0"
@@ -7461,7 +6334,7 @@ func_mode_link ()
done
# Make executables depend on our current version.
- func_append verstring ":${current}.0"
+ verstring="$verstring:${current}.0"
;;
qnx)
@@ -7529,10 +6402,10 @@ func_mode_link ()
fi
func_generate_dlsyms "$libname" "$libname" "yes"
- func_append libobjs " $symfileobj"
+ libobjs="$libobjs $symfileobj"
test "X$libobjs" = "X " && libobjs=
- if test "$opt_mode" != relink; then
+ if test "$mode" != relink; then
# Remove our outputs, but don't remove object files since they
# may have been created when compiling PIC objects.
removelist=
@@ -7548,7 +6421,7 @@ func_mode_link ()
continue
fi
fi
- func_append removelist " $p"
+ removelist="$removelist $p"
;;
*) ;;
esac
@@ -7559,28 +6432,27 @@ func_mode_link ()
# Now set the variables for building old libraries.
if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
- func_append oldlibs " $output_objdir/$libname.$libext"
+ oldlibs="$oldlibs $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
- oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
fi
# Eliminate all temporary directories.
#for path in $notinst_path; do
- # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
- # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
- # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+ # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
+ # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
#done
if test -n "$xrpath"; then
# If the user specified any rpath flags, then add them.
temp_xrpath=
for libdir in $xrpath; do
- func_replace_sysroot "$libdir"
- func_append temp_xrpath " -R$func_replace_sysroot_result"
+ temp_xrpath="$temp_xrpath -R$libdir"
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) func_append finalize_rpath " $libdir" ;;
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
esac
done
if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
@@ -7594,7 +6466,7 @@ func_mode_link ()
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
*" $lib "*) ;;
- *) func_append dlfiles " $lib" ;;
+ *) dlfiles="$dlfiles $lib" ;;
esac
done
@@ -7604,19 +6476,19 @@ func_mode_link ()
for lib in $old_dlprefiles; do
case "$dlprefiles " in
*" $lib "*) ;;
- *) func_append dlprefiles " $lib" ;;
+ *) dlprefiles="$dlprefiles $lib" ;;
esac
done
if test "$build_libtool_libs" = yes; then
if test -n "$rpath"; then
case $host in
- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
# these systems don't actually have a c library (as such)!
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C library is in the System framework
- func_append deplibs " System.ltframework"
+ deplibs="$deplibs System.ltframework"
;;
*-*-netbsd*)
# Don't link with libc until the a.out ld.so is fixed.
@@ -7633,7 +6505,7 @@ func_mode_link ()
*)
# Add libc to deplibs on all other systems if necessary.
if test "$build_libtool_need_lc" = "yes"; then
- func_append deplibs " -lc"
+ deplibs="$deplibs -lc"
fi
;;
esac
@@ -7682,7 +6554,7 @@ EOF
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
- func_append newdeplibs " $i"
+ newdeplibs="$newdeplibs $i"
i=""
;;
esac
@@ -7693,21 +6565,21 @@ EOF
set dummy $deplib_matches; shift
deplib_match=$1
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- func_append newdeplibs " $i"
+ newdeplibs="$newdeplibs $i"
else
droppeddeps=yes
- echo
+ $ECHO
$ECHO "*** Warning: dynamic linker does not accept needed library $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which I believe you do not have"
- echo "*** because a test_compile did reveal that the linker did not use it for"
- echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which I believe you do not have"
+ $ECHO "*** because a test_compile did reveal that the linker did not use it for"
+ $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
fi
fi
;;
*)
- func_append newdeplibs " $i"
+ newdeplibs="$newdeplibs $i"
;;
esac
done
@@ -7725,7 +6597,7 @@ EOF
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $i "*)
- func_append newdeplibs " $i"
+ newdeplibs="$newdeplibs $i"
i=""
;;
esac
@@ -7736,29 +6608,29 @@ EOF
set dummy $deplib_matches; shift
deplib_match=$1
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
- func_append newdeplibs " $i"
+ newdeplibs="$newdeplibs $i"
else
droppeddeps=yes
- echo
+ $ECHO
$ECHO "*** Warning: dynamic linker does not accept needed library $i."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have"
- echo "*** because a test_compile did reveal that the linker did not use this one"
- echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have"
+ $ECHO "*** because a test_compile did reveal that the linker did not use this one"
+ $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
fi
fi
else
droppeddeps=yes
- echo
+ $ECHO
$ECHO "*** Warning! Library $i is needed by this library but I was not able to"
- echo "*** make it link in! You will probably need to install it or some"
- echo "*** library that it depends on before this library will be fully"
- echo "*** functional. Installing it before continuing would be even better."
+ $ECHO "*** make it link in! You will probably need to install it or some"
+ $ECHO "*** library that it depends on before this library will be fully"
+ $ECHO "*** functional. Installing it before continuing would be even better."
fi
;;
*)
- func_append newdeplibs " $i"
+ newdeplibs="$newdeplibs $i"
;;
esac
done
@@ -7775,27 +6647,15 @@ EOF
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
- func_append newdeplibs " $a_deplib"
+ newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
;;
esac
fi
if test -n "$a_deplib" ; then
libname=`eval "\\$ECHO \"$libname_spec\""`
- if test -n "$file_magic_glob"; then
- libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
- else
- libnameglob=$libname
- fi
- test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- if test "$want_nocaseglob" = yes; then
- shopt -s nocaseglob
- potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
- $nocaseglob
- else
- potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
- fi
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
# Follow soft links.
if ls -lLd "$potent_lib" 2>/dev/null |
@@ -7812,13 +6672,13 @@ EOF
potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
case $potliblink in
[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
esac
done
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
$SED -e 10q |
$EGREP "$file_magic_regex" > /dev/null; then
- func_append newdeplibs " $a_deplib"
+ newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
break 2
fi
@@ -7827,12 +6687,12 @@ EOF
fi
if test -n "$a_deplib" ; then
droppeddeps=yes
- echo
+ $ECHO
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have"
- echo "*** because I did check the linker path looking for a file starting"
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have"
+ $ECHO "*** because I did check the linker path looking for a file starting"
if test -z "$potlib" ; then
$ECHO "*** with $libname but no candidates were found. (...for file magic test)"
else
@@ -7843,7 +6703,7 @@ EOF
;;
*)
# Add a -L argument.
- func_append newdeplibs " $a_deplib"
+ newdeplibs="$newdeplibs $a_deplib"
;;
esac
done # Gone through all deplibs.
@@ -7859,7 +6719,7 @@ EOF
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
case " $predeps $postdeps " in
*" $a_deplib "*)
- func_append newdeplibs " $a_deplib"
+ newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
;;
esac
@@ -7870,9 +6730,9 @@ EOF
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
potlib="$potent_lib" # see symlink-check above in file_magic test
- if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+ if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
$EGREP "$match_pattern_regex" > /dev/null; then
- func_append newdeplibs " $a_deplib"
+ newdeplibs="$newdeplibs $a_deplib"
a_deplib=""
break 2
fi
@@ -7881,12 +6741,12 @@ EOF
fi
if test -n "$a_deplib" ; then
droppeddeps=yes
- echo
+ $ECHO
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
- echo "*** I have the capability to make that library automatically link in when"
- echo "*** you link to this library. But I can only do this if you have a"
- echo "*** shared version of the library, which you do not appear to have"
- echo "*** because I did check the linker path looking for a file starting"
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have"
+ $ECHO "*** because I did check the linker path looking for a file starting"
if test -z "$potlib" ; then
$ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
else
@@ -7897,32 +6757,32 @@ EOF
;;
*)
# Add a -L argument.
- func_append newdeplibs " $a_deplib"
+ newdeplibs="$newdeplibs $a_deplib"
;;
esac
done # Gone through all deplibs.
;;
none | unknown | *)
newdeplibs=""
- tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+ tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
+ -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
for i in $predeps $postdeps ; do
# can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
done
fi
- case $tmp_deplibs in
- *[!\ \ ]*)
- echo
+ if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' |
+ $GREP . >/dev/null; then
+ $ECHO
if test "X$deplibs_check_method" = "Xnone"; then
- echo "*** Warning: inter-library dependencies are not supported in this platform."
+ $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
else
- echo "*** Warning: inter-library dependencies are not known to be supported."
+ $ECHO "*** Warning: inter-library dependencies are not known to be supported."
fi
- echo "*** All declared inter-library dependencies are being dropped."
+ $ECHO "*** All declared inter-library dependencies are being dropped."
droppeddeps=yes
- ;;
- esac
+ fi
;;
esac
versuffix=$versuffix_save
@@ -7934,23 +6794,23 @@ EOF
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library with the System framework
- newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
;;
esac
if test "$droppeddeps" = yes; then
if test "$module" = yes; then
- echo
- echo "*** Warning: libtool could not satisfy all declared inter-library"
+ $ECHO
+ $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
$ECHO "*** dependencies of module $libname. Therefore, libtool will create"
- echo "*** a static module, that should work as long as the dlopening"
- echo "*** application is linked with the -dlopen flag."
+ $ECHO "*** a static module, that should work as long as the dlopening"
+ $ECHO "*** application is linked with the -dlopen flag."
if test -z "$global_symbol_pipe"; then
- echo
- echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
- echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ $ECHO
+ $ECHO "*** However, this would only work if libtool was able to extract symbol"
+ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ $ECHO "*** not find such a program. So, this module is probably useless."
+ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
fi
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
@@ -7960,16 +6820,16 @@ EOF
build_libtool_libs=no
fi
else
- echo "*** The inter-library dependencies that have been dropped here will be"
- echo "*** automatically added whenever a program is linked with this library"
- echo "*** or is declared to -dlopen it."
+ $ECHO "*** The inter-library dependencies that have been dropped here will be"
+ $ECHO "*** automatically added whenever a program is linked with this library"
+ $ECHO "*** or is declared to -dlopen it."
if test "$allow_undefined" = no; then
- echo
- echo "*** Since this library must not contain undefined symbols,"
- echo "*** because either the platform does not support them or"
- echo "*** it was explicitly requested with -no-undefined,"
- echo "*** libtool will only create a static version of it."
+ $ECHO
+ $ECHO "*** Since this library must not contain undefined symbols,"
+ $ECHO "*** because either the platform does not support them or"
+ $ECHO "*** it was explicitly requested with -no-undefined,"
+ $ECHO "*** libtool will only create a static version of it."
if test "$build_old_libs" = no; then
oldlibs="$output_objdir/$libname.$libext"
build_libtool_libs=module
@@ -7986,9 +6846,9 @@ EOF
# Time to change all our "foo.ltframework" stuff back to "-framework foo"
case $host in
*-*-darwin*)
- newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
;;
esac
@@ -8001,7 +6861,7 @@ EOF
*)
case " $deplibs " in
*" -L$path/$objdir "*)
- func_append new_libs " -L$path/$objdir" ;;
+ new_libs="$new_libs -L$path/$objdir" ;;
esac
;;
esac
@@ -8011,10 +6871,10 @@ EOF
-L*)
case " $new_libs " in
*" $deplib "*) ;;
- *) func_append new_libs " $deplib" ;;
+ *) new_libs="$new_libs $deplib" ;;
esac
;;
- *) func_append new_libs " $deplib" ;;
+ *) new_libs="$new_libs $deplib" ;;
esac
done
deplibs="$new_libs"
@@ -8031,12 +6891,10 @@ EOF
hardcode_libdirs=
dep_rpath=
rpath="$finalize_rpath"
- test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ test "$mode" != relink && rpath="$compile_rpath$rpath"
for libdir in $rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
- func_replace_sysroot "$libdir"
- libdir=$func_replace_sysroot_result
if test -z "$hardcode_libdirs"; then
hardcode_libdirs="$libdir"
else
@@ -8045,18 +6903,18 @@ EOF
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
- func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- func_append dep_rpath " $flag"
+ dep_rpath="$dep_rpath $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
- *) func_apped perm_rpath " $libdir" ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
esac
fi
done
@@ -8074,7 +6932,7 @@ EOF
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
- func_append rpath "$dir:"
+ rpath="$rpath$dir:"
done
eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
fi
@@ -8082,7 +6940,7 @@ EOF
fi
shlibpath="$finalize_shlibpath"
- test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
if test -n "$shlibpath"; then
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
fi
@@ -8108,18 +6966,18 @@ EOF
linknames=
for link
do
- func_append linknames " $link"
+ linknames="$linknames $link"
done
# Use standard objects if they are pic
- test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
test "X$libobjs" = "X " && libobjs=
delfiles=
if test -n "$export_symbols" && test -n "$include_expsyms"; then
$opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
export_symbols="$output_objdir/$libname.uexp"
- func_append delfiles " $export_symbols"
+ delfiles="$delfiles $export_symbols"
fi
orig_export_symbols=
@@ -8150,45 +7008,13 @@ EOF
$opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
save_ifs="$IFS"; IFS='~'
- for cmd1 in $cmds; do
+ for cmd in $cmds; do
IFS="$save_ifs"
- # Take the normal branch if the nm_file_list_spec branch
- # doesn't work or if tool conversion is not needed.
- case $nm_file_list_spec~$to_tool_file_cmd in
- *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
- try_normal_branch=yes
- eval cmd=\"$cmd1\"
- func_len " $cmd"
- len=$func_len_result
- ;;
- *)
- try_normal_branch=no
- ;;
- esac
- if test "$try_normal_branch" = yes \
- && { test "$len" -lt "$max_cmd_len" \
- || test "$max_cmd_len" -le -1; }
- then
- func_show_eval "$cmd" 'exit $?'
- skipped_export=false
- elif test -n "$nm_file_list_spec"; then
- func_basename "$output"
- output_la=$func_basename_result
- save_libobjs=$libobjs
- save_output=$output
- output=${output_objdir}/${output_la}.nm
- func_to_tool_file "$output"
- libobjs=$nm_file_list_spec$func_to_tool_file_result
- func_append delfiles " $output"
- func_verbose "creating $NM input file list: $output"
- for obj in $save_libobjs; do
- func_to_tool_file "$obj"
- $ECHO "$func_to_tool_file_result"
- done > "$output"
- eval cmd=\"$cmd1\"
+ eval cmd=\"$cmd\"
+ func_len " $cmd"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
func_show_eval "$cmd" 'exit $?'
- output=$save_output
- libobjs=$save_libobjs
skipped_export=false
else
# The command line is too long to execute in one step.
@@ -8210,7 +7036,7 @@ EOF
if test -n "$export_symbols" && test -n "$include_expsyms"; then
tmp_export_symbols="$export_symbols"
test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
- $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
fi
if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
@@ -8222,7 +7048,7 @@ EOF
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
- func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
@@ -8232,7 +7058,7 @@ EOF
case " $convenience " in
*" $test_deplib "*) ;;
*)
- func_append tmp_deplibs " $test_deplib"
+ tmp_deplibs="$tmp_deplibs $test_deplib"
;;
esac
done
@@ -8252,21 +7078,21 @@ EOF
test "X$libobjs" = "X " && libobjs=
else
gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
+ generated="$generated $gentop"
func_extract_archives $gentop $convenience
- func_append libobjs " $func_extract_archives_result"
+ libobjs="$libobjs $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
fi
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
- func_append linker_flags " $flag"
+ linker_flags="$linker_flags $flag"
fi
# Make a backup of the uninstalled library when relinking
- if test "$opt_mode" = relink; then
+ if test "$mode" = relink; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
fi
@@ -8311,8 +7137,7 @@ EOF
save_libobjs=$libobjs
fi
save_output=$output
- func_basename "$output"
- output_la=$func_basename_result
+ output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
# Clear the reloadable object creation command queue and
# initialize k to one.
@@ -8325,16 +7150,13 @@ EOF
if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
output=${output_objdir}/${output_la}.lnkscript
func_verbose "creating GNU ld script: $output"
- echo 'INPUT (' > $output
+ $ECHO 'INPUT (' > $output
for obj in $save_libobjs
do
- func_to_tool_file "$obj"
- $ECHO "$func_to_tool_file_result" >> $output
+ $ECHO "$obj" >> $output
done
- echo ')' >> $output
- func_append delfiles " $output"
- func_to_tool_file "$output"
- output=$func_to_tool_file_result
+ $ECHO ')' >> $output
+ delfiles="$delfiles $output"
elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
output=${output_objdir}/${output_la}.lnk
func_verbose "creating linker input file list: $output"
@@ -8348,12 +7170,10 @@ EOF
fi
for obj
do
- func_to_tool_file "$obj"
- $ECHO "$func_to_tool_file_result" >> $output
+ $ECHO "$obj" >> $output
done
- func_append delfiles " $output"
- func_to_tool_file "$output"
- output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+ delfiles="$delfiles $output"
+ output=$firstobj\"$file_list_spec$output\"
else
if test -n "$save_libobjs"; then
func_verbose "creating reloadable object files..."
@@ -8377,19 +7197,17 @@ EOF
# command to the queue.
if test "$k" -eq 1 ; then
# The first file doesn't have a previous command to add.
- reload_objs=$objlist
- eval concat_cmds=\"$reload_cmds\"
+ eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
else
# All subsequent reloadable object files will link in
# the last one created.
- reload_objs="$objlist $last_robj"
- eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
fi
last_robj=$output_objdir/$output_la-${k}.$objext
func_arith $k + 1
k=$func_arith_result
output=$output_objdir/$output_la-${k}.$objext
- objlist=" $obj"
+ objlist=$obj
func_len " $last_robj"
func_arith $len0 + $func_len_result
len=$func_arith_result
@@ -8399,12 +7217,11 @@ EOF
# reloadable object file. All subsequent reloadable object
# files will link in the last one created.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- reload_objs="$objlist $last_robj"
- eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
if test -n "$last_robj"; then
eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
fi
- func_append delfiles " $output"
+ delfiles="$delfiles $output"
else
output=
@@ -8438,7 +7255,7 @@ EOF
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test "$mode" = relink; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
@@ -8459,7 +7276,7 @@ EOF
if test -n "$export_symbols" && test -n "$include_expsyms"; then
tmp_export_symbols="$export_symbols"
test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
- $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
fi
if test -n "$orig_export_symbols"; then
@@ -8471,7 +7288,7 @@ EOF
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
$opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
- func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
@@ -8512,10 +7329,10 @@ EOF
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
+ generated="$generated $gentop"
func_extract_archives $gentop $dlprefiles
- func_append libobjs " $func_extract_archives_result"
+ libobjs="$libobjs $func_extract_archives_result"
test "X$libobjs" = "X " && libobjs=
fi
@@ -8531,7 +7348,7 @@ EOF
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test "$mode" = relink; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
@@ -8543,7 +7360,7 @@ EOF
IFS="$save_ifs"
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test "$mode" = relink; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
if test -n "$convenience"; then
@@ -8624,21 +7441,18 @@ EOF
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
else
gentop="$output_objdir/${obj}x"
- func_append generated " $gentop"
+ generated="$generated $gentop"
func_extract_archives $gentop $convenience
reload_conv_objs="$reload_objs $func_extract_archives_result"
fi
fi
- # If we're not building shared, we need to use non_pic_objs
- test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
-
# Create the old-style object.
- reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+ reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
output="$obj"
func_execute_cmds "$reload_cmds" 'exit $?'
@@ -8698,8 +7512,8 @@ EOF
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
# On Rhapsody replace the C library is the System framework
- compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
- finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
;;
esac
@@ -8710,14 +7524,14 @@ EOF
if test "$tagname" = CXX ; then
case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
10.[0123])
- func_append compile_command " ${wl}-bind_at_load"
- func_append finalize_command " ${wl}-bind_at_load"
+ compile_command="$compile_command ${wl}-bind_at_load"
+ finalize_command="$finalize_command ${wl}-bind_at_load"
;;
esac
fi
# Time to change all our "foo.ltframework" stuff back to "-framework foo"
- compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
;;
esac
@@ -8731,7 +7545,7 @@ EOF
*)
case " $compile_deplibs " in
*" -L$path/$objdir "*)
- func_append new_libs " -L$path/$objdir" ;;
+ new_libs="$new_libs -L$path/$objdir" ;;
esac
;;
esac
@@ -8741,17 +7555,17 @@ EOF
-L*)
case " $new_libs " in
*" $deplib "*) ;;
- *) func_append new_libs " $deplib" ;;
+ *) new_libs="$new_libs $deplib" ;;
esac
;;
- *) func_append new_libs " $deplib" ;;
+ *) new_libs="$new_libs $deplib" ;;
esac
done
compile_deplibs="$new_libs"
- func_append compile_command " $compile_deplibs"
- func_append finalize_command " $finalize_deplibs"
+ compile_command="$compile_command $compile_deplibs"
+ finalize_command="$finalize_command $finalize_deplibs"
if test -n "$rpath$xrpath"; then
# If the user specified any rpath flags, then add them.
@@ -8759,7 +7573,7 @@ EOF
# This is the magic to use -rpath.
case "$finalize_rpath " in
*" $libdir "*) ;;
- *) func_append finalize_rpath " $libdir" ;;
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
esac
done
fi
@@ -8778,18 +7592,18 @@ EOF
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
- func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- func_append rpath " $flag"
+ rpath="$rpath $flag"
fi
elif test -n "$runpath_var"; then
case "$perm_rpath " in
*" $libdir "*) ;;
- *) func_append perm_rpath " $libdir" ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
esac
fi
case $host in
@@ -8798,12 +7612,12 @@ EOF
case :$dllsearchpath: in
*":$libdir:"*) ;;
::) dllsearchpath=$libdir;;
- *) func_append dllsearchpath ":$libdir";;
+ *) dllsearchpath="$dllsearchpath:$libdir";;
esac
case :$dllsearchpath: in
*":$testbindir:"*) ;;
::) dllsearchpath=$testbindir;;
- *) func_append dllsearchpath ":$testbindir";;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
esac
;;
esac
@@ -8829,18 +7643,18 @@ EOF
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
;;
*)
- func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
;;
esac
fi
else
eval flag=\"$hardcode_libdir_flag_spec\"
- func_append rpath " $flag"
+ rpath="$rpath $flag"
fi
elif test -n "$runpath_var"; then
case "$finalize_perm_rpath " in
*" $libdir "*) ;;
- *) func_append finalize_perm_rpath " $libdir" ;;
+ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
esac
fi
done
@@ -8854,8 +7668,8 @@ EOF
if test -n "$libobjs" && test "$build_old_libs" = yes; then
# Transform all the library objects into standard objects.
- compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
- finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
fi
func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
@@ -8867,15 +7681,15 @@ EOF
wrappers_required=yes
case $host in
- *cegcc* | *mingw32ce*)
- # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
- wrappers_required=no
- ;;
*cygwin* | *mingw* )
if test "$build_libtool_libs" != yes; then
wrappers_required=no
fi
;;
+ *cegcc)
+ # Disable wrappers for cegcc, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
*)
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
wrappers_required=no
@@ -8884,19 +7698,13 @@ EOF
esac
if test "$wrappers_required" = no; then
# Replace the output file specification.
- compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
link_command="$compile_command$compile_rpath"
# We have no uninstalled library dependencies, so finalize right now.
exit_status=0
func_show_eval "$link_command" 'exit_status=$?'
- if test -n "$postlink_cmds"; then
- func_to_tool_file "$output"
- postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
- func_execute_cmds "$postlink_cmds" 'exit $?'
- fi
-
# Delete the generated files.
if test -f "$output_objdir/${outputname}S.${objext}"; then
func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
@@ -8919,7 +7727,7 @@ EOF
# We should set the runpath_var.
rpath=
for dir in $perm_rpath; do
- func_append rpath "$dir:"
+ rpath="$rpath$dir:"
done
compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
@@ -8927,7 +7735,7 @@ EOF
# We should set the runpath_var.
rpath=
for dir in $finalize_perm_rpath; do
- func_append rpath "$dir:"
+ rpath="$rpath$dir:"
done
finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
fi
@@ -8937,18 +7745,11 @@ EOF
# We don't need to create a wrapper script.
link_command="$compile_var$compile_command$compile_rpath"
# Replace the output file specification.
- link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
# Delete the old output file.
$opt_dry_run || $RM $output
# Link the executable and exit
func_show_eval "$link_command" 'exit $?'
-
- if test -n "$postlink_cmds"; then
- func_to_tool_file "$output"
- postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
- func_execute_cmds "$postlink_cmds" 'exit $?'
- fi
-
exit $EXIT_SUCCESS
fi
@@ -8963,7 +7764,7 @@ EOF
if test "$fast_install" != no; then
link_command="$finalize_var$compile_command$finalize_rpath"
if test "$fast_install" = yes; then
- relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
else
# fast_install is set to needless
relink_command=
@@ -8975,19 +7776,13 @@ EOF
fi
# Replace the output file specification.
- link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
# Delete the old output files.
$opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
func_show_eval "$link_command" 'exit $?'
- if test -n "$postlink_cmds"; then
- func_to_tool_file "$output_objdir/$outputname"
- postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
- func_execute_cmds "$postlink_cmds" 'exit $?'
- fi
-
# Now create the wrapper script.
func_verbose "creating $output"
@@ -9005,7 +7800,18 @@ EOF
fi
done
relink_command="(cd `pwd`; $relink_command)"
- relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ fi
+
+ # Quote $ECHO for shipping.
+ if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
+ case $progpath in
+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+ esac
+ qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
+ else
+ qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
fi
# Only actually do things if not in dry run mode.
@@ -9085,7 +7891,7 @@ EOF
else
oldobjs="$old_deplibs $non_pic_objects"
if test "$preload" = yes && test -f "$symfileobj"; then
- func_append oldobjs " $symfileobj"
+ oldobjs="$oldobjs $symfileobj"
fi
fi
addlibs="$old_convenience"
@@ -9093,10 +7899,10 @@ EOF
if test -n "$addlibs"; then
gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
+ generated="$generated $gentop"
func_extract_archives $gentop $addlibs
- func_append oldobjs " $func_extract_archives_result"
+ oldobjs="$oldobjs $func_extract_archives_result"
fi
# Do each command in the archive commands.
@@ -9107,10 +7913,10 @@ EOF
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
+ generated="$generated $gentop"
func_extract_archives $gentop $dlprefiles
- func_append oldobjs " $func_extract_archives_result"
+ oldobjs="$oldobjs $func_extract_archives_result"
fi
# POSIX demands no paths to be encoded in archives. We have
@@ -9126,9 +7932,9 @@ EOF
done | sort | sort -uc >/dev/null 2>&1); then
:
else
- echo "copying selected object files to avoid basename conflicts..."
+ $ECHO "copying selected object files to avoid basename conflicts..."
gentop="$output_objdir/${outputname}x"
- func_append generated " $gentop"
+ generated="$generated $gentop"
func_mkdir_p "$gentop"
save_oldobjs=$oldobjs
oldobjs=
@@ -9152,9 +7958,9 @@ EOF
esac
done
func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
- func_append oldobjs " $gentop/$newobj"
+ oldobjs="$oldobjs $gentop/$newobj"
;;
- *) func_append oldobjs " $obj" ;;
+ *) oldobjs="$oldobjs $obj" ;;
esac
done
fi
@@ -9164,16 +7970,6 @@ EOF
len=$func_len_result
if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
cmds=$old_archive_cmds
- elif test -n "$archiver_list_spec"; then
- func_verbose "using command file archive linking..."
- for obj in $oldobjs
- do
- func_to_tool_file "$obj"
- $ECHO "$func_to_tool_file_result"
- done > $output_objdir/$libname.libcmd
- func_to_tool_file "$output_objdir/$libname.libcmd"
- oldobjs=" $archiver_list_spec$func_to_tool_file_result"
- cmds=$old_archive_cmds
else
# the command line is too long to link in one step, link in parts
func_verbose "using piecewise archive linking..."
@@ -9247,7 +8043,7 @@ EOF
done
# Quote the link command for shipping.
relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
- relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
if test "$hardcode_automatic" = yes ; then
relink_command=
fi
@@ -9270,19 +8066,9 @@ EOF
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
test -z "$libdir" && \
func_fatal_error "\`$deplib' is not a valid libtool archive"
- func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
- ;;
- -L*)
- func_stripname -L '' "$deplib"
- func_replace_sysroot "$func_stripname_result"
- func_append newdependency_libs " -L$func_replace_sysroot_result"
+ newdependency_libs="$newdependency_libs $libdir/$name"
;;
- -R*)
- func_stripname -R '' "$deplib"
- func_replace_sysroot "$func_stripname_result"
- func_append newdependency_libs " -R$func_replace_sysroot_result"
- ;;
- *) func_append newdependency_libs " $deplib" ;;
+ *) newdependency_libs="$newdependency_libs $deplib" ;;
esac
done
dependency_libs="$newdependency_libs"
@@ -9296,9 +8082,9 @@ EOF
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
func_fatal_error "\`$lib' is not a valid libtool archive"
- func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+ newdlfiles="$newdlfiles $libdir/$name"
;;
- *) func_append newdlfiles " $lib" ;;
+ *) newdlfiles="$newdlfiles $lib" ;;
esac
done
dlfiles="$newdlfiles"
@@ -9315,7 +8101,7 @@ EOF
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
func_fatal_error "\`$lib' is not a valid libtool archive"
- func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+ newdlprefiles="$newdlprefiles $libdir/$name"
;;
esac
done
@@ -9327,7 +8113,7 @@ EOF
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
- func_append newdlfiles " $abs"
+ newdlfiles="$newdlfiles $abs"
done
dlfiles="$newdlfiles"
newdlprefiles=
@@ -9336,33 +8122,15 @@ EOF
[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
*) abs=`pwd`"/$lib" ;;
esac
- func_append newdlprefiles " $abs"
+ newdlprefiles="$newdlprefiles $abs"
done
dlprefiles="$newdlprefiles"
fi
$RM $output
# place dlname in correct position for cygwin
- # In fact, it would be nice if we could use this code for all target
- # systems that can't hard-code library paths into their executables
- # and that have no shared library path variable independent of PATH,
- # but it turns out we can't easily determine that from inspecting
- # libtool variables, so we have to hard-code the OSs to which it
- # applies here; at the moment, that means platforms that use the PE
- # object format with DLL files. See the long comment at the top of
- # tests/bindir.at for full details.
tdlname=$dlname
case $host,$output,$installed,$module,$dlname in
- *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
- # If a -bindir argument was supplied, place the dll there.
- if test "x$bindir" != x ;
- then
- func_relative_path "$install_libdir" "$bindir"
- tdlname=$func_relative_path_result$dlname
- else
- # Otherwise fall back on heuristic.
- tdlname=../bin/$dlname
- fi
- ;;
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
esac
$ECHO > $output "\
# $outputname - a libtool library file
@@ -9421,7 +8189,7 @@ relink_command=\"$relink_command\""
exit $EXIT_SUCCESS
}
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+{ test "$mode" = link || test "$mode" = relink; } &&
func_mode_link ${1+"$@"}
@@ -9441,9 +8209,9 @@ func_mode_uninstall ()
for arg
do
case $arg in
- -f) func_append RM " $arg"; rmforce=yes ;;
- -*) func_append RM " $arg" ;;
- *) func_append files " $arg" ;;
+ -f) RM="$RM $arg"; rmforce=yes ;;
+ -*) RM="$RM $arg" ;;
+ *) files="$files $arg" ;;
esac
done
@@ -9452,23 +8220,24 @@ func_mode_uninstall ()
rmdirs=
+ origobjdir="$objdir"
for file in $files; do
func_dirname "$file" "" "."
dir="$func_dirname_result"
if test "X$dir" = X.; then
- odir="$objdir"
+ objdir="$origobjdir"
else
- odir="$dir/$objdir"
+ objdir="$dir/$origobjdir"
fi
func_basename "$file"
name="$func_basename_result"
- test "$opt_mode" = uninstall && odir="$dir"
+ test "$mode" = uninstall && objdir="$dir"
- # Remember odir for removal later, being careful to avoid duplicates
- if test "$opt_mode" = clean; then
+ # Remember objdir for removal later, being careful to avoid duplicates
+ if test "$mode" = clean; then
case " $rmdirs " in
- *" $odir "*) ;;
- *) func_append rmdirs " $odir" ;;
+ *" $objdir "*) ;;
+ *) rmdirs="$rmdirs $objdir" ;;
esac
fi
@@ -9494,17 +8263,18 @@ func_mode_uninstall ()
# Delete the libtool libraries and symlinks.
for n in $library_names; do
- func_append rmfiles " $odir/$n"
+ rmfiles="$rmfiles $objdir/$n"
done
- test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
- case "$opt_mode" in
+ case "$mode" in
clean)
- case " $library_names " in
+ case " $library_names " in
+ # " " in the beginning catches empty $dlname
*" $dlname "*) ;;
- *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+ *) rmfiles="$rmfiles $objdir/$dlname" ;;
esac
- test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
;;
uninstall)
if test -n "$library_names"; then
@@ -9532,19 +8302,19 @@ func_mode_uninstall ()
# Add PIC object to the list of files to remove.
if test -n "$pic_object" &&
test "$pic_object" != none; then
- func_append rmfiles " $dir/$pic_object"
+ rmfiles="$rmfiles $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
if test -n "$non_pic_object" &&
test "$non_pic_object" != none; then
- func_append rmfiles " $dir/$non_pic_object"
+ rmfiles="$rmfiles $dir/$non_pic_object"
fi
fi
;;
*)
- if test "$opt_mode" = clean ; then
+ if test "$mode" = clean ; then
noexename=$name
case $file in
*.exe)
@@ -9554,7 +8324,7 @@ func_mode_uninstall ()
noexename=$func_stripname_result
# $file with .exe has already been added to rmfiles,
# add $file without .exe
- func_append rmfiles " $file"
+ rmfiles="$rmfiles $file"
;;
esac
# Do a test to see if this is a libtool program.
@@ -9563,7 +8333,7 @@ func_mode_uninstall ()
func_ltwrapper_scriptname "$file"
relink_command=
func_source $func_ltwrapper_scriptname_result
- func_append rmfiles " $func_ltwrapper_scriptname_result"
+ rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
else
relink_command=
func_source $dir/$noexename
@@ -9571,12 +8341,12 @@ func_mode_uninstall ()
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
- func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
if test "$fast_install" = yes && test -n "$relink_command"; then
- func_append rmfiles " $odir/lt-$name"
+ rmfiles="$rmfiles $objdir/lt-$name"
fi
if test "X$noexename" != "X$name" ; then
- func_append rmfiles " $odir/lt-${noexename}.c"
+ rmfiles="$rmfiles $objdir/lt-${noexename}.c"
fi
fi
fi
@@ -9584,6 +8354,7 @@ func_mode_uninstall ()
esac
func_show_eval "$RM $rmfiles" 'exit_status=1'
done
+ objdir="$origobjdir"
# Try to remove the ${objdir}s in the directories where we deleted files
for dir in $rmdirs; do
@@ -9595,16 +8366,16 @@ func_mode_uninstall ()
exit $exit_status
}
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+{ test "$mode" = uninstall || test "$mode" = clean; } &&
func_mode_uninstall ${1+"$@"}
-test -z "$opt_mode" && {
+test -z "$mode" && {
help="$generic_help"
func_fatal_help "you must specify a MODE"
}
test -z "$exec_cmd" && \
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode \`$mode'"
if test -n "$exec_cmd"; then
eval exec "$exec_cmd"
diff --git a/src/actions.c b/src/actions.c
index 600a70e..723b7a5 100644
--- a/src/actions.c
+++ b/src/actions.c
@@ -28,7 +28,8 @@
#include <gtk/gtk.h>
/* Xfce includes */
-#include <libxfcegui4/libxfcegui4.h>
+//#include <libxfcegui4/libxfcegui4.h>
+#include <libxfce4ui/libxfce4ui.h>
/* Package includes */
#include <middlelayer.h>
diff --git a/src/callbacks.c b/src/callbacks.c
index fa87b39..8681f13 100644
--- a/src/callbacks.c
+++ b/src/callbacks.c
@@ -27,7 +27,8 @@
#include <stdlib.h>
/* Xfce includes */
-#include <libxfcegui4/libxfcegui4.h>
+//#include <libxfcegui4/libxfcegui4.h>
+#include <libxfce4ui/libxfce4ui.h>
/* Package includes */
#include <sensors-interface.h>
diff --git a/src/interface.c b/src/interface.c
index a81bef7..0799848 100644
--- a/src/interface.c
+++ b/src/interface.c
@@ -24,7 +24,8 @@
#endif
/* Xfce includes */
-#include <libxfcegui4/libxfcegui4.h>
+//#include <libxfcegui4/libxfcegui4.h>
+#include <libxfce4ui/libxfce4ui.h>
/* Package includes */
#include <cpu.h>
More information about the Xfce4-commits
mailing list