[Xfce4-commits] <xfce4-quicklauncher-plugin:master> Potfile cleanup.
Nick Schermer
noreply at xfce.org
Sat Jul 13 21:10:01 CEST 2013
Updating branch refs/heads/master
to f8b38c1770be8cb7000a963129af3069799c9bf9 (commit)
from afec2e7ed3cf5ed263d922ae31ce03e35cba0e15 (commit)
commit f8b38c1770be8cb7000a963129af3069799c9bf9
Author: Nick Schermer <nick at xfce.org>
Date: Sat Jul 13 21:08:10 2013 +0200
Potfile cleanup.
INSTALL | 291 -------------------------------------
autogen.sh | 23 ++-
po/ChangeLog | 224 ----------------------------
po/LINGUAS | 2 -
po/xfce4-quicklauncher-plugin.pot | 85 -----------
5 files changed, 16 insertions(+), 609 deletions(-)
diff --git a/INSTALL b/INSTALL
deleted file mode 100644
index 8b82ade..0000000
--- a/INSTALL
+++ /dev/null
@@ -1,291 +0,0 @@
-Installation Instructions
-*************************
-
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
-2006, 2007, 2008 Free Software Foundation, Inc.
-
- This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
- Briefly, the shell commands `./configure; make; make install' should
-configure, build, and install this package. The following
-more-detailed instructions are generic; see the `README' file for
-instructions specific to this package.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You need `configure.ac' if
-you want to change it or regenerate `configure' using a newer version
-of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system.
-
- Running `configure' might take a while. While running, it prints
- some messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
- 6. Often, you can also type `make uninstall' to remove the installed
- files again.
-
-Compilers and Options
-=====================
-
- Some systems require unusual options for compilation or linking that
-the `configure' script does not know about. Run `./configure --help'
-for details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c99 CFLAGS=-g LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
- You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you can use GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- With a non-GNU `make', it is safer to compile the package for one
-architecture at a time in the source code directory. After you have
-installed the package for one architecture, use `make distclean' before
-reconfiguring for another architecture.
-
- On MacOS X 10.5 and later systems, you can create libraries and
-executables that work on multiple system types--known as "fat" or
-"universal" binaries--by specifying multiple `-arch' options to the
-compiler but only a single `-arch' option to the preprocessor. Like
-this:
-
- ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
- CPP="gcc -E" CXXCPP="g++ -E"
-
- This is not guaranteed to produce working output in all cases, you
-may have to build one architecture at a time and combine the results
-using the `lipo' tool if you have problems.
-
-Installation Names
-==================
-
- By default, `make install' installs the package's commands under
-`/usr/local/bin', include files under `/usr/local/include', etc. You
-can specify an installation prefix other than `/usr/local' by giving
-`configure' the option `--prefix=PREFIX'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-pass the option `--exec-prefix=PREFIX' to `configure', the package uses
-PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
- Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Particular systems
-==================
-
- On HP-UX, the default C compiler is not ANSI C compatible. If GNU
-CC is not installed, it is recommended to use the following options in
-order to use an ANSI C compiler:
-
- ./configure CC="cc -Ae"
-
-and if that doesn't work, install pre-built binaries of GCC for HP-UX.
-
- On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
-parse its `<wchar.h>' header file. The option `-nodtk' can be used as
-a workaround. If GNU CC is not installed, it is therefore recommended
-to try
-
- ./configure CC="cc"
-
-and if that doesn't work, try
-
- ./configure CC="cc -nodtk"
-
-Specifying the System Type
-==========================
-
- There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on. Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the option `--target=TYPE' to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
- If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
- Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-Unfortunately, this technique does not work for `CONFIG_SHELL' due to
-an Autoconf bug. Until the bug is fixed you can use this workaround:
-
- CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
-
-`configure' Invocation
-======================
-
- `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
- Print a summary of all of the options to `configure', and exit.
-
-`--help=short'
-`--help=recursive'
- Print a summary of the options unique to this package's
- `configure', and exit. The `short' variant lists options used
- only in the top level, while the `recursive' variant lists options
- also present in any nested packages.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`--prefix=DIR'
- Use DIR as the installation prefix. *Note Installation Names::
- for more details, including other options available for fine-tuning
- the installation locations.
-
-`--no-create'
-`-n'
- Run the configure checks, but stop before creating any output
- files.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
-
diff --git a/autogen.sh b/autogen.sh
index 143e1ca..b5875b6 100755
--- a/autogen.sh
+++ b/autogen.sh
@@ -1,12 +1,23 @@
#!/bin/sh
#
-# $Id: autogen.sh 4312 2005-01-27 10:10:04Z jasper $
+# vi:set et ai sw=2 sts=2 ts=2: */
+#-
+# Copyright (c) Xfce Development Team
#
-# Copyright (c) 2002-2005
-# The Xfce development team. All rights reserved.
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
#
-# Written for Xfce by Benedikt Meurer <benny at xfce.org>.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
#
+# You should have received a copy of the GNU General Public
+# License along with this program; if not, write to the Free
+# Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+# Boston, MA 02110-1301, USA.
(type xdt-autogen) >/dev/null 2>&1 || {
cat >&2 <<EOF
@@ -18,6 +29,4 @@ EOF
exit 1
}
-exec xdt-autogen $@
-
-# vi:set ts=2 sw=2 et ai:
+XDT_AUTOGEN_REQUIRED_VERSION="4.7.2" exec xdt-autogen $@
diff --git a/po/ChangeLog b/po/ChangeLog
deleted file mode 100644
index 3bb7567..0000000
--- a/po/ChangeLog
+++ /dev/null
@@ -1,224 +0,0 @@
-2009-08-08 Mike Massonnet <mmassonnet at xfce.org>
-
- * ast.po: Asturian translation added (Marcos Alvarez Costales)
-
-2009-07-24 Gabor Kelemen <kelemeng at gnome.hu>
-
- * hu.po: Translation reworked.
-
-2009-05-29 Mike Massonnet <mmassonnet at xfce.org>
-
- * ur_PK.po: Urdu Pakistan translation update (Muhammad Ali Makki)
- * ur.po: Urdu translation update (Muhammad Ali Makki)
-
-2009-05-11 Mike Massonnet <mmassonnet at xfce.org>
-
- * zh_CN.po: Simplified Chinese translation update (Hunt Xu)
-
-2009-04-16 Mike Massonnet <mmassonnet at xfce.org>
-
- * gl.po: Galician translation update (Leandro Regueiro)
-
-2009-03-14 Maximilian Schleiss <maximilian at xfce.org>
-
- * gl.po: Galician translation update (Leandro Regueiro)
- * it.po, LINGUAS: Italian translation added (Cristian Marchi)
-
-2009-03-05 Mike Massonnet <mmassonnet at xfce.org>
-
- * pt.po: Renamed pt_PT.po to pt.po (bug #4574)
-
-2009-02-22 Mike Massonnet <mmassonnet at xfce.org>
-
- * es.po: Add Spanish translation (Abel Martín)
-
-2009-02-20 Maximilian Schleiss <maximilian at xfce.org>
-
- * gl.po: Galician translation update (Leandro Regueiro)
-
-2009-01-13 Alexander Toresson <eulex at xfce.org>
-
- * sv.po, LINGUAS: Swedish translation added (Daniel Nylander)
-
-2008-12-25 Maximilian Schleiss <maximilian at xfce.org>
-
- * gl.po: Galician translation update (Leandro Regueiro)
-
-2008-12-13 Maximilian Schleiss <maximilian at xfce.org>
-
- * zh_CN.po: Simplified Chinese translation added (Hunt Xu)
-
-2008-11-17 Eren Türkay <erenturkay at xfce.org>
-
- * tr.po: Turkish translation update (Turkish translation team: Gökmen Görgen, Samed Beyribey, Özgür Kuru, Utku Aydın)
-
-2008-11-16 Maximilian Schleiss <maximilian at xfce.org>
-
- * ca.po: Catalan translation update (Carles Muñoz Gorriz)
-
-2008-11-09 Maximilian Schleiss <maximilian at xfce.org>
-
- * sq.po: Albanian translation update (Besnik Bleta)
-
-2008-11-02 Michal Várady <miko.vaji at gmail.com>
-
- * cs.po: Czech translation updated
-
-2008-10-28 Lars Nielsen <lars at mit-web.dk>
-
- * da.po: Update danish translation
-
-2008-10-27 Piarres Beobide <pi at beobide.net>
-
- * eu.po: BAsque translation update
-
-2008-10-11 Maximilian Schleiss <maximilian at xfce.org>
-
- * ja.po: Japanese translation update (Masato Hashimoto)
-
-2008-07-15 Mohamed Magdy <alnokta at xfce.org>
-
- * ar.po: Add Arabic translation
-
-2008-06-26 Maximilian Schleiss <maximilian at xfce.org>
-
- * gl.po: Galician translation update (Leandro Regueiro)
-
-2008-06-25 Maximilian Schleiss <maximilian at xfce.org>
-
- * id.po, LINGUAS: Indonesian translation added (Andhika Padmawan)
-
-2008-05-27 Mike Massonnet <mmassonnet at xfce.org>
-
- * da.po, LINGUAS: Add Danish translation (Jens Hyllegaard)
-
-2008-05-10 Stavros Giannouris <stavrosg at hellug.gr>
-
- * el.po: Greek translation update by Evaggelos Balaskas
-
-2008-03-18 Mike Massonnet <mmassonnet at xfce.org>
-
- * pt_PT.po: Update Portuguese translation by Nuno Miguel
-
-2007-11-18 Maximilian Schleiss <maximilian at xfce.org>
-
- * lv.po: Latvian translation added
- by Rihards Priedītis <rprieditis at inbox.lv>
-
-2007-11-15 Mike Massonnet <mmassonnet at xfce.org>
-
- * ur.po: Update translation by Muhammad Ali Makki <makki.ma at gmail.com>
- * pk.po, ur.po: Rename pk.po to ur.po.
-
-2007-10-28 Mike Massonnet <mmassonnet at xfce.org>
-
- * pk.po: Add new translation by محمد علي المكي <makki.ma at gmail.com>
-
-2007-09-12 Mike Massonnet <mmassonnet at xfce.org>
-
- * eu.po: Update Basque translations
- by <piarres at gmail.com>
-
-2007-09-07 Og Maciel <ogmaciel at gnome.org>
-
- * pt_BR.po: Brazilian Protuguese translation added
- by Vladimir Melo <vladimirmelo at foresightlinux.org>
-
-2007-07-08 Maximilian Schleiss <maximilian at xfce.org>
-
- * pt_PT.po: European Protuguese translation added
- by Nuno Miguel <nunis at netcabo.pt>
-
-2007-03-31 Pau Rul-lan Ferragut <paurullan at bulma.net>
-
- * gb.po: British translation
- by Jeff Bailes <thepizzaking at gmail.com>
-
-2007-02-20 Maximilian Schleiss <maximilian at xfce.org>
-
- * sq.po: Modified the headers for the Albanian translation
- by Besnik Bleta <besnik at programeshqip.org>
-
-2007-02-02 Maximilian Schleiss <maximilian at xfce.org>
-
- * fr.po: Added the Albanian translation
- by Besnik Bleta <besnik at programeshqip.org>
-
-2006-09-18 Pau Rul-lan Ferragut <paurullan at bulma.net>
-
- * ca.po: Add Catalan translations
-
-2006-08-27 Jean-François Wauthy <pollux at xfce.org>
-
- * cs.po: Add Czech translations
-
-2006-08-15 Jean-François Wauthy <pollux at xfce.org>
-
- * gl.po: Add Galician translations
-
-2006-08-04 Stavros Giannouris <stavrosg at serverhive.com>
-
- * el.po: Updated Greek translation.
-
-2006-07-27 Jean-François Wauthy <pollux at xfce.org>
-
- * fr.po: Updated French translations by Maximilian Schleiss
- <maximilian at xfce.org>
-
-2006-04-09 Daichi Kawahata <daichi at xfce.org>
-
- * ru.po: Added Russian translations by Andrey Fedoseev
- <andrey.fedoseev at gmail.com>.
-
-2006-04-08 Daichi Kawahata <daichi at xfce.org>
-
- * el.po: Added Greek translations by Stavros Giannouris
- <stavrosg at serverhive.com>.
- * pl.po: Added Polish translations by Piotr Malinski
- <admin at rk.edu.pl>.
-
-2006-04-02 Daichi Kawahata <daichi at xfce.org>
-
- * xfce4-quicklauncher-plugin.pot, *.po: Updated.
-
-2006-02-12 Daichi Kawahata <daichi at xfce.org>
-
- * ja.po: Added Japanese translations.
-
-2006-02-11 Szervac Attila <sas at 321.hu>
-
- * hu.po: Add Hungarian Translations
-
-2006-01-13 Masse Nicolas <nicolas at yahoo.fr>
-
- * Makefile, Makefile.in: fix a bug who crashed the panel
-
-2005-12-03 Masse Nicolas <nicolas at yahoo.fr>
-
- * Makefile, Makefile.in, fr.po, xfce4-quicklauncher-plugin.po,
- xfce4-quicklauncher-plugin.pot: update version to 1.9.1 and
- update gettext stuff
-
-2005-12-03 Masse Nicolas <nicolas at yahoo.fr>
-
- * Makefile, Makefile.in, Makefile.in.in: fixes some issues and
- adding a dialog box
-
-2005-09-29 Masse Nicolas <nicolas at yahoo.fr>
-
- * Makefile, Makefile.in, Makefile.in.in,
- xfce4-quicklauncher-plugin.po: fixes some autoconf & friends
- stuff
-
-2005-09-28 Masse Nicolas <nicolas at yahoo.fr>
-
- * fr.po: hopefully works with new panel == need some tests ==
-
-2005-09-25 Masse Nicolas <nicolas at yahoo.fr>
-
- * Makefile, Makefile.in, Makefile.in.in, Makevars, POTFILES,
- POTFILES.in, Rules-quot, boldquot.sed, en at boldquot.header,
- en at quot.header, fr.gmo, fr.po, insert-header.sin, quot.sed,
- remove-potcdate.sin, xfce4-quicklauncher-plugin.pot: port
- to the new panel
-
diff --git a/po/LINGUAS b/po/LINGUAS
deleted file mode 100644
index 164e454..0000000
--- a/po/LINGUAS
+++ /dev/null
@@ -1,2 +0,0 @@
-# set of available languages (in alphabetic order)
-ar ast ca cs da de el en_GB es eu fr gl hu id it ja lv pl pt_BR pt ru sq sv tr uk ur ur_PK vi zh_CN
diff --git a/po/xfce4-quicklauncher-plugin.pot b/po/xfce4-quicklauncher-plugin.pot
deleted file mode 100644
index 3ae21a0..0000000
--- a/po/xfce4-quicklauncher-plugin.pot
+++ /dev/null
@@ -1,85 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL at ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2007-05-17 21:37+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL at ADDRESS>\n"
-"Language-Team: LANGUAGE <LL at li.org>\n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=CHARSET\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: ../panel-plugin/callbacks.c:79
-msgid "Configure Quicklauncher"
-msgstr ""
-
-#: ../panel-plugin/callbacks.c:93
-msgid "Lines: "
-msgstr ""
-
-#: ../panel-plugin/callbacks.c:123
-msgid "Espace entre les lanceurs :"
-msgstr ""
-
-#: ../panel-plugin/callbacks.c:131
-msgid "afficher les tooltips"
-msgstr ""
-
-#: ../panel-plugin/callbacks.c:135
-msgid "afficher les labels"
-msgstr ""
-
-#: ../panel-plugin/callbacks.c:216
-msgid "icone"
-msgstr ""
-
-#: ../panel-plugin/callbacks.c:222
-msgid "commande"
-msgstr ""
-
-#: ../panel-plugin/callbacks.c:228
-msgid "nom"
-msgstr ""
-
-#: ../panel-plugin/callbacks.c:327
-msgid "Open icon"
-msgstr ""
-
-#: ../panel-plugin/main.c:163 ../panel-plugin/quicklauncher.desktop.in.in.h:2
-msgid "Quicklauncher"
-msgstr ""
-
-#: ../panel-plugin/main.c:166
-msgid "Allows you to add launchers easily and display them on many lines."
-msgstr ""
-
-#: ../panel-plugin/main.c:168
-msgid "Other plugins available here"
-msgstr ""
-
-#: ../panel-plugin/main.c:320
-msgid "Lock"
-msgstr ""
-
-#: ../panel-plugin/main.c:323
-msgid "Parameters"
-msgstr ""
-
-#: ../panel-plugin/main.c:326
-msgid "Applications"
-msgstr ""
-
-#: ../panel-plugin/main.c:329
-msgid "Help"
-msgstr ""
-
-#: ../panel-plugin/quicklauncher.desktop.in.in.h:1
-msgid "Program with several launchers"
-msgstr ""
More information about the Xfce4-commits
mailing list