[Goodies-commits] r3430 - verve-plugin/trunk

Jannis Pohlmann jannis at xfce.org
Tue Oct 23 10:27:57 CEST 2007


Author: jannis
Date: 2007-10-23 08:27:57 +0000 (Tue, 23 Oct 2007)
New Revision: 3430

Modified:
   verve-plugin/trunk/ChangeLog
   verve-plugin/trunk/INSTALL
   verve-plugin/trunk/configure.in.in
Log:
	* configure.in.in: Depend on pcre 5.0 which has pkg-config
	  support and thus is easier to detect during compilation.

Modified: verve-plugin/trunk/ChangeLog
===================================================================
--- verve-plugin/trunk/ChangeLog	2007-10-22 22:08:38 UTC (rev 3429)
+++ verve-plugin/trunk/ChangeLog	2007-10-23 08:27:57 UTC (rev 3430)
@@ -1,3 +1,8 @@
+2007-10-23	Jannis Pohlmann <jannis at xfce.org>
+
+	* configure.in.in: Depend on pcre 5.0 which has pkg-config
+	  support and thus is easier to detect during compilation.
+
 2007-04-24	Jannis Pohlmann <jannis at xfce.org>
 
 	* panel-plugin/verve-plugin.c: This bug has been driving me

Modified: verve-plugin/trunk/INSTALL
===================================================================
--- verve-plugin/trunk/INSTALL	2007-10-22 22:08:38 UTC (rev 3429)
+++ verve-plugin/trunk/INSTALL	2007-10-23 08:27:57 UTC (rev 3430)
@@ -1,13 +1,19 @@
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software
-Foundation, Inc.
+Installation Instructions
+*************************
 
-   This file is free documentation; the Free Software Foundation gives
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006 Free Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
 unlimited permission to copy, distribute and modify it.
 
 Basic Installation
 ==================
 
-   These are generic installation instructions.
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
@@ -20,9 +26,9 @@
 
    It can also use an optional file (typically called `config.cache'
 and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
+the results of its tests to speed up reconfiguring.  Caching is
 disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
@@ -32,20 +38,17 @@
 may remove or edit it.
 
    The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
 
 The simplest way to compile this package is:
 
   1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
+     `./configure' to configure the package for your system.
 
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
 
   2. Type `make' to compile the package.
 
@@ -67,51 +70,49 @@
 Compilers and Options
 =====================
 
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
 
    You can give `configure' initial values for configuration parameters
 by setting variables in the command line or in the environment.  Here
 is an example:
 
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
    *Note Defining Variables::, for more details.
 
 Compiling For Multiple Architectures
 ====================================
 
-   You can compile the package for more than one kind of computer at the
+You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
 source code in the directory that `configure' is in and in `..'.
 
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
 
 Installation Names
 ==================
 
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
+options like `--bindir=DIR' to specify different values for particular
 kinds of files.  Run `configure --help' for a list of the directories
 you can set and what kinds of files go in them.
 
@@ -122,7 +123,7 @@
 Optional Features
 =================
 
-   Some packages pay attention to `--enable-FEATURE' options to
+Some packages pay attention to `--enable-FEATURE' options to
 `configure', where FEATURE indicates an optional part of the package.
 They may also pay attention to `--with-PACKAGE' options, where PACKAGE
 is something like `gnu-as' or `x' (for the X Window System).  The
@@ -137,11 +138,11 @@
 Specifying the System Type
 ==========================
 
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
 `--build=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name which has the form:
 
@@ -156,7 +157,7 @@
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
@@ -167,9 +168,9 @@
 Sharing Defaults
 ================
 
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
 `configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
@@ -178,7 +179,7 @@
 Defining Variables
 ==================
 
-   Variables not defined in a site shell script can be set in the
+Variables not defined in a site shell script can be set in the
 environment passed to `configure'.  However, some packages may run
 configure again during the build, and the customized values of these
 variables may be lost.  In order to avoid this problem, you should set
@@ -186,14 +187,18 @@
 
      ./configure CC=/usr/local2/bin/gcc
 
-will cause the specified gcc to be used as the C compiler (unless it is
+causes the specified `gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).
 
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
+
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
 `configure' Invocation
 ======================
 
-   `configure' recognizes the following options to control how it
-operates.
+`configure' recognizes the following options to control how it operates.
 
 `--help'
 `-h'

Modified: verve-plugin/trunk/configure.in.in
===================================================================
--- verve-plugin/trunk/configure.in.in	2007-10-22 22:08:38 UTC (rev 3429)
+++ verve-plugin/trunk/configure.in.in	2007-10-23 08:27:57 UTC (rev 3430)
@@ -57,24 +57,8 @@
 XDT_CHECK_PACKAGE([LIBXFCE4UTIL], [libxfce4util-1.0], [4.3.0])
 XDT_CHECK_PACKAGE([GLIB], [glib-2.0], [2.6.4])
 XDT_CHECK_PACKAGE([GTHREAD], [gthread-2.0], [2.6.4])
+XDT_CHECK_PACKAGE([LIBPCRE], [libpcre], [5.0])
 
-dnl **************************
-dnl *** Check for libpcre3 ***
-dnl **************************
-LIBPCRE_LIBS=""
-LIBPCRE_CFLAGS=""
-AC_CHECK_LIB([pcre], [pcre_compile],
-[
-  AC_CHECK_HEADER([pcre.h],
-  [
-    LIBPCRE_LIBS="-lpcre"
-    AC_DEFINE([HAVE_LIBPCRE], [1], [Define to 1 if libpcre is found])
-    AC_DEFINE([HAVE_PCRE_H], [1], [Define to 1 if pcre.h is found])
-  ])
-], [-lm])
-AC_SUBST([LIBPCRE_CFLAGS])
-AC_SUBST([LIBPCRE_LIBS])
-
 dnl *********************************
 dnl ** Optional support for D-BUS ***
 dnl *********************************




More information about the Goodies-commits mailing list