[Goodies-commits] r3646 - in thunar-archive-plugin/trunk: . thunar-archive-plugin

Benedikt Meurer benny at xfce.org
Mon Nov 26 23:21:41 CET 2007 

Author: benny
Date: 2007-11-26 22:21:41 +0000 (Mon, 26 Nov 2007)
New Revision: 3646

Modified:
   thunar-archive-plugin/trunk/ChangeLog
   thunar-archive-plugin/trunk/INSTALL
   thunar-archive-plugin/trunk/thunar-archive-plugin/tap-provider.c
Log:
2007-11-26	Benedikt Meurer <benny at xfce.org>

	* INSTALL: Update from automake.
	* thunar-archive-plugin/tap-provider.c: Add support for 7-Zip
	  archives. Bug #3692.




Modified: thunar-archive-plugin/trunk/ChangeLog
===================================================================
--- thunar-archive-plugin/trunk/ChangeLog	2007-11-26 20:38:13 UTC (rev 3645)
+++ thunar-archive-plugin/trunk/ChangeLog	2007-11-26 22:21:41 UTC (rev 3646)
@@ -1,3 +1,9 @@
+2007-11-26	Benedikt Meurer <benny at xfce.org>
+
+	* INSTALL: Update from automake.
+	* thunar-archive-plugin/tap-provider.c: Add support for 7-Zip
+	  archives. Bug #3692.
+
 2007-01-20	Benedikt Meurer <benny at xfce.org>
 
 	* configure.in.in: Post-release version bump.

Modified: thunar-archive-plugin/trunk/INSTALL
===================================================================
--- thunar-archive-plugin/trunk/INSTALL	2007-11-26 20:38:13 UTC (rev 3645)
+++ thunar-archive-plugin/trunk/INSTALL	2007-11-26 22:21:41 UTC (rev 3646)
@@ -1,8 +1,8 @@
 Installation Instructions
 *************************
 
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free
-Software Foundation, Inc.
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
+2006 Free Software Foundation, Inc.
 
 This file is free documentation; the Free Software Foundation gives
 unlimited permission to copy, distribute and modify it.
@@ -10,7 +10,10 @@
 Basic Installation
 ==================
 
-These are generic installation instructions.
+Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.
 
    The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
@@ -23,9 +26,9 @@
 
    It can also use an optional file (typically called `config.cache'
 and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
+the results of its tests to speed up reconfiguring.  Caching is
 disabled by default to prevent problems with accidental use of stale
-cache files.)
+cache files.
 
    If you need to do unusual things to compile the package, please try
 to figure out how `configure' could check whether to do them, and mail
@@ -35,20 +38,17 @@
 may remove or edit it.
 
    The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
 
 The simplest way to compile this package is:
 
   1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
+     `./configure' to configure the package for your system.
 
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
 
   2. Type `make' to compile the package.
 
@@ -78,7 +78,7 @@
 by setting variables in the command line or in the environment.  Here
 is an example:
 
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
 
    *Note Defining Variables::, for more details.
 
@@ -87,31 +87,29 @@
 
 You can compile the package for more than one kind of computer at the
 same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+own directory.  To do this, you can use GNU `make'.  `cd' to the
 directory where you want the object files and executables to go and run
 the `configure' script.  `configure' automatically checks for the
 source code in the directory that `configure' is in and in `..'.
 
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
 
 Installation Names
 ==================
 
-By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PREFIX'.
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
 
    You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PREFIX', the package will
-use PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
 
    In addition, if you use an unusual directory layout you can give
 options like `--bindir=DIR' to specify different values for particular
@@ -159,7 +157,7 @@
 need to know the machine type.
 
    If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
+use the option `--target=TYPE' to select the type of system they will
 produce code for.
 
    If you want to _use_ a cross compiler, that generates code for a
@@ -189,9 +187,14 @@
 
      ./configure CC=/usr/local2/bin/gcc
 
-will cause the specified gcc to be used as the C compiler (unless it is
+causes the specified `gcc' to be used as the C compiler (unless it is
 overridden in the site shell script).
 
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
+
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
 `configure' Invocation
 ======================
 

Modified: thunar-archive-plugin/trunk/thunar-archive-plugin/tap-provider.c
===================================================================
--- thunar-archive-plugin/trunk/thunar-archive-plugin/tap-provider.c	2007-11-26 20:38:13 UTC (rev 3645)
+++ thunar-archive-plugin/trunk/thunar-archive-plugin/tap-provider.c	2007-11-26 22:21:41 UTC (rev 3646)
@@ -121,6 +121,7 @@
   "application/x-lzop",
   "application/x-zoo",
   "application/x-cd-image",
+  "application/x-7z-compressed",
 };
 
 static GQuark tap_action_files_quark;

More information about the Goodies-commits mailing list