[Goodies-commits] r3616 - in xfce4-cpugraph-plugin/trunk: . po
ludovic mercier
lidiriel at xfce.org
Thu Nov 22 09:07:56 CET 2007
Author: lidiriel
Date: 2007-11-22 08:07:56 +0000 (Thu, 22 Nov 2007)
New Revision: 3616
Added:
xfce4-cpugraph-plugin/trunk/aclocal.m4
xfce4-cpugraph-plugin/trunk/compile
xfce4-cpugraph-plugin/trunk/config.h.in
xfce4-cpugraph-plugin/trunk/depcomp
xfce4-cpugraph-plugin/trunk/install-sh
xfce4-cpugraph-plugin/trunk/missing
Removed:
xfce4-cpugraph-plugin/trunk/po/xfce4-cpugraph-plugin.pot
Log:
prepare release 0.4.0
Added: xfce4-cpugraph-plugin/trunk/aclocal.m4
===================================================================
--- xfce4-cpugraph-plugin/trunk/aclocal.m4 (rev 0)
+++ xfce4-cpugraph-plugin/trunk/aclocal.m4 2007-11-22 08:07:56 UTC (rev 3616)
@@ -0,0 +1,2171 @@
+# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# Copyright (C) 1995-2002 Free Software Foundation, Inc.
+# Copyright (C) 2001-2003,2004 Red Hat, Inc.
+#
+# This file is free software, distributed under the terms of the GNU
+# General Public License. As a special exception to the GNU General
+# Public License, this file may be distributed as part of a program
+# that contains a configuration script generated by Autoconf, under
+# the same distribution terms as the rest of that program.
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+#
+# Macro to add for using GNU gettext.
+# Ulrich Drepper <drepper at cygnus.com>, 1995, 1996
+#
+# Modified to never use included libintl.
+# Owen Taylor <otaylor at redhat.com>, 12/15/1998
+#
+# Major rework to remove unused code
+# Owen Taylor <otaylor at redhat.com>, 12/11/2002
+#
+# Added better handling of ALL_LINGUAS from GNU gettext version
+# written by Bruno Haible, Owen Taylor <otaylor.redhat.com> 5/30/3002
+#
+# Modified to require ngettext
+# Matthias Clasen <mclasen at redhat.com> 08/06/2004
+#
+# We need this here as well, since someone might use autoconf-2.5x
+# to configure GLib then an older version to configure a package
+# using AM_GLIB_GNU_GETTEXT
+AC_PREREQ(2.53)
+
+dnl
+dnl We go to great lengths to make sure that aclocal won't
+dnl try to pull in the installed version of these macros
+dnl when running aclocal in the glib directory.
+dnl
+m4_copy([AC_DEFUN],[glib_DEFUN])
+m4_copy([AC_REQUIRE],[glib_REQUIRE])
+dnl
+dnl At the end, if we're not within glib, we'll define the public
+dnl definitions in terms of our private definitions.
+dnl
+
+# GLIB_LC_MESSAGES
+#--------------------
+glib_DEFUN([GLIB_LC_MESSAGES],
+ [AC_CHECK_HEADERS([locale.h])
+ if test $ac_cv_header_locale_h = yes; then
+ AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+ am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
+ if test $am_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES, 1,
+ [Define if your <locale.h> file defines LC_MESSAGES.])
+ fi
+ fi])
+
+# GLIB_PATH_PROG_WITH_TEST
+#----------------------------
+dnl GLIB_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+glib_DEFUN([GLIB_PATH_PROG_WITH_TEST],
+[# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ /*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word"
+ break
+ fi
+ fi
+ done
+ IFS="$ac_save_ifs"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
+
+# GLIB_WITH_NLS
+#-----------------
+glib_DEFUN([GLIB_WITH_NLS],
+ dnl NLS is obligatory
+ [USE_NLS=yes
+ AC_SUBST(USE_NLS)
+
+ gt_cv_have_gettext=no
+
+ CATOBJEXT=NONE
+ XGETTEXT=:
+ INTLLIBS=
+
+ AC_CHECK_HEADER(libintl.h,
+ [gt_cv_func_dgettext_libintl="no"
+ libintl_extra_libs=""
+
+ #
+ # First check in libc
+ #
+ AC_CACHE_CHECK([for ngettext in libc], gt_cv_func_ngettext_libc,
+ [AC_TRY_LINK([
+#include <libintl.h>
+],
+ [return !ngettext ("","", 1)],
+ gt_cv_func_ngettext_libc=yes,
+ gt_cv_func_ngettext_libc=no)
+ ])
+
+ if test "$gt_cv_func_ngettext_libc" = "yes" ; then
+ AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc,
+ [AC_TRY_LINK([
+#include <libintl.h>
+],
+ [return !dgettext ("","")],
+ gt_cv_func_dgettext_libc=yes,
+ gt_cv_func_dgettext_libc=no)
+ ])
+ fi
+
+ if test "$gt_cv_func_ngettext_libc" = "yes" ; then
+ AC_CHECK_FUNCS(bind_textdomain_codeset)
+ fi
+
+ #
+ # If we don't have everything we want, check in libintl
+ #
+ if test "$gt_cv_func_dgettext_libc" != "yes" \
+ || test "$gt_cv_func_ngettext_libc" != "yes" \
+ || test "$ac_cv_func_bind_textdomain_codeset" != "yes" ; then
+
+ AC_CHECK_LIB(intl, bindtextdomain,
+ [AC_CHECK_LIB(intl, ngettext,
+ [AC_CHECK_LIB(intl, dgettext,
+ gt_cv_func_dgettext_libintl=yes)])])
+
+ if test "$gt_cv_func_dgettext_libintl" != "yes" ; then
+ AC_MSG_CHECKING([if -liconv is needed to use gettext])
+ AC_MSG_RESULT([])
+ AC_CHECK_LIB(intl, ngettext,
+ [AC_CHECK_LIB(intl, dcgettext,
+ [gt_cv_func_dgettext_libintl=yes
+ libintl_extra_libs=-liconv],
+ :,-liconv)],
+ :,-liconv)
+ fi
+
+ #
+ # If we found libintl, then check in it for bind_textdomain_codeset();
+ # we'll prefer libc if neither have bind_textdomain_codeset(),
+ # and both have dgettext and ngettext
+ #
+ if test "$gt_cv_func_dgettext_libintl" = "yes" ; then
+ glib_save_LIBS="$LIBS"
+ LIBS="$LIBS -lintl $libintl_extra_libs"
+ unset ac_cv_func_bind_textdomain_codeset
+ AC_CHECK_FUNCS(bind_textdomain_codeset)
+ LIBS="$glib_save_LIBS"
+
+ if test "$ac_cv_func_bind_textdomain_codeset" = "yes" ; then
+ gt_cv_func_dgettext_libc=no
+ else
+ if test "$gt_cv_func_dgettext_libc" = "yes" \
+ && test "$gt_cv_func_ngettext_libc" = "yes"; then
+ gt_cv_func_dgettext_libintl=no
+ fi
+ fi
+ fi
+ fi
+
+ if test "$gt_cv_func_dgettext_libc" = "yes" \
+ || test "$gt_cv_func_dgettext_libintl" = "yes"; then
+ gt_cv_have_gettext=yes
+ fi
+
+ if test "$gt_cv_func_dgettext_libintl" = "yes"; then
+ INTLLIBS="-lintl $libintl_extra_libs"
+ fi
+
+ if test "$gt_cv_have_gettext" = "yes"; then
+ AC_DEFINE(HAVE_GETTEXT,1,
+ [Define if the GNU gettext() function is already present or preinstalled.])
+ GLIB_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
+ if test "$MSGFMT" != "no"; then
+ glib_save_LIBS="$LIBS"
+ LIBS="$LIBS $INTLLIBS"
+ AC_CHECK_FUNCS(dcgettext)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+ GLIB_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
+ AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
+ return _nl_msg_cat_cntr],
+ [CATOBJEXT=.gmo
+ DATADIRNAME=share],
+ [case $host in
+ *-*-solaris*)
+ dnl On Solaris, if bind_textdomain_codeset is in libc,
+ dnl GNU format message catalog is always supported,
+ dnl since both are added to the libc all together.
+ dnl Hence, we'd like to go with DATADIRNAME=share and
+ dnl and CATOBJEXT=.gmo in this case.
+ AC_CHECK_FUNC(bind_textdomain_codeset,
+ [CATOBJEXT=.gmo
+ DATADIRNAME=share],
+ [CATOBJEXT=.mo
+ DATADIRNAME=lib])
+ ;;
+ *)
+ CATOBJEXT=.mo
+ DATADIRNAME=lib
+ ;;
+ esac])
+ LIBS="$glib_save_LIBS"
+ INSTOBJEXT=.mo
+ else
+ gt_cv_have_gettext=no
+ fi
+ fi
+ ])
+
+ if test "$gt_cv_have_gettext" = "yes" ; then
+ AC_DEFINE(ENABLE_NLS, 1,
+ [always defined to indicate that i18n is enabled])
+ fi
+
+ dnl Test whether we really found GNU xgettext.
+ if test "$XGETTEXT" != ":"; then
+ dnl If it is not GNU xgettext we define it as : so that the
+ dnl Makefiles still can work.
+ if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
+ : ;
+ else
+ AC_MSG_RESULT(
+ [found xgettext program is not GNU xgettext; ignore it])
+ XGETTEXT=":"
+ fi
+ fi
+
+ # We need to process the po/ directory.
+ POSUB=po
+
+ AC_OUTPUT_COMMANDS(
+ [case "$CONFIG_FILES" in *po/Makefile.in*)
+ sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
+ esac])
+
+ dnl These rules are solely for the distribution goal. While doing this
+ dnl we only have to keep exactly one list of the available catalogs
+ dnl in configure.in.
+ for lang in $ALL_LINGUAS; do
+ GMOFILES="$GMOFILES $lang.gmo"
+ POFILES="$POFILES $lang.po"
+ done
+
+ dnl Make all variables we use known to autoconf.
+ AC_SUBST(CATALOGS)
+ AC_SUBST(CATOBJEXT)
+ AC_SUBST(DATADIRNAME)
+ AC_SUBST(GMOFILES)
+ AC_SUBST(INSTOBJEXT)
+ AC_SUBST(INTLLIBS)
+ AC_SUBST(PO_IN_DATADIR_TRUE)
+ AC_SUBST(PO_IN_DATADIR_FALSE)
+ AC_SUBST(POFILES)
+ AC_SUBST(POSUB)
+ ])
+
+# AM_GLIB_GNU_GETTEXT
+# -------------------
+# Do checks necessary for use of gettext. If a suitable implementation
+# of gettext is found in either in libintl or in the C library,
+# it will set INTLLIBS to the libraries needed for use of gettext
+# and AC_DEFINE() HAVE_GETTEXT and ENABLE_NLS. (The shell variable
+# gt_cv_have_gettext will be set to "yes".) It will also call AC_SUBST()
+# on various variables needed by the Makefile.in.in installed by
+# glib-gettextize.
+dnl
+glib_DEFUN([GLIB_GNU_GETTEXT],
+ [AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_HEADER_STDC])dnl
+
+ GLIB_LC_MESSAGES
+ GLIB_WITH_NLS
+
+ if test "$gt_cv_have_gettext" = "yes"; then
+ if test "x$ALL_LINGUAS" = "x"; then
+ LINGUAS=
+ else
+ AC_MSG_CHECKING(for catalogs to be installed)
+ NEW_LINGUAS=
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "${LINGUAS-%UNSET%}"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ NEW_LINGUAS="$NEW_LINGUAS $presentlang"
+ fi
+ done
+ LINGUAS=$NEW_LINGUAS
+ AC_MSG_RESULT($LINGUAS)
+ fi
+
+ dnl Construct list of names of catalog files to be constructed.
+ if test -n "$LINGUAS"; then
+ for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
+ fi
+ fi
+
+ dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
+ dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
+ dnl Try to locate is.
+ MKINSTALLDIRS=
+ if test -n "$ac_aux_dir"; then
+ MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
+ fi
+ if test -z "$MKINSTALLDIRS"; then
+ MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
+ fi
+ AC_SUBST(MKINSTALLDIRS)
+
+ dnl Generate list of files to be processed by xgettext which will
+ dnl be included in po/Makefile.
+ test -d po || mkdir po
+ if test "x$srcdir" != "x."; then
+ if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
+ posrcprefix="$srcdir/"
+ else
+ posrcprefix="../$srcdir/"
+ fi
+ else
+ posrcprefix="../"
+ fi
+ rm -f po/POTFILES
+ sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
+ < $srcdir/po/POTFILES.in > po/POTFILES
+ ])
+
+# AM_GLIB_DEFINE_LOCALEDIR(VARIABLE)
+# -------------------------------
+# Define VARIABLE to the location where catalog files will
+# be installed by po/Makefile.
+glib_DEFUN([GLIB_DEFINE_LOCALEDIR],
+[glib_REQUIRE([GLIB_GNU_GETTEXT])dnl
+glib_save_prefix="$prefix"
+glib_save_exec_prefix="$exec_prefix"
+glib_save_datarootdir="$datarootdir"
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+test "x$exec_prefix" = xNONE && exec_prefix=$prefix
+datarootdir=`eval echo "${datarootdir}"`
+if test "x$CATOBJEXT" = "x.mo" ; then
+ localedir=`eval echo "${libdir}/locale"`
+else
+ localedir=`eval echo "${datadir}/locale"`
+fi
+prefix="$glib_save_prefix"
+exec_prefix="$glib_save_exec_prefix"
+datarootdir="$glib_save_datarootdir"
+AC_DEFINE_UNQUOTED($1, "$localedir",
+ [Define the location where the catalogs will be installed])
+])
+
+dnl
+dnl Now the definitions that aclocal will find
+dnl
+ifdef(glib_configure_in,[],[
+AC_DEFUN([AM_GLIB_GNU_GETTEXT],[GLIB_GNU_GETTEXT($@)])
+AC_DEFUN([AM_GLIB_DEFINE_LOCALEDIR],[GLIB_DEFINE_LOCALEDIR($@)])
+])dnl
+
+
+dnl IT_PROG_INTLTOOL([MINIMUM-VERSION], [no-xml])
+# serial 35 IT_PROG_INTLTOOL
+AC_DEFUN([IT_PROG_INTLTOOL],
+[AC_PREREQ([2.50])dnl
+
+case "$am__api_version" in
+ 1.[01234])
+ AC_MSG_ERROR([Automake 1.5 or newer is required to use intltool])
+ ;;
+ *)
+ ;;
+esac
+
+if test -n "$1"; then
+ AC_MSG_CHECKING(for intltool >= $1)
+
+ INTLTOOL_REQUIRED_VERSION_AS_INT=`echo $1 | awk -F. '{ print $ 1 * 1000 + $ 2 * 100 + $ 3; }'`
+ INTLTOOL_APPLIED_VERSION=`awk -F\" '/\\$VERSION / { print $ 2; }' ${ac_aux_dir}/intltool-update.in`
+ [INTLTOOL_APPLIED_VERSION_AS_INT=`awk -F\" '/\\$VERSION / { split($ 2, VERSION, "."); print VERSION[1] * 1000 + VERSION[2] * 100 + VERSION[3];}' ${ac_aux_dir}/intltool-update.in`
+ ]
+ AC_MSG_RESULT([$INTLTOOL_APPLIED_VERSION found])
+ test "$INTLTOOL_APPLIED_VERSION_AS_INT" -ge "$INTLTOOL_REQUIRED_VERSION_AS_INT" ||
+ AC_MSG_ERROR([Your intltool is too old. You need intltool $1 or later.])
+fi
+
+ INTLTOOL_DESKTOP_RULE='%.desktop: %.desktop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+INTLTOOL_DIRECTORY_RULE='%.directory: %.directory.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+ INTLTOOL_KEYS_RULE='%.keys: %.keys.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -k -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+ INTLTOOL_PROP_RULE='%.prop: %.prop.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+ INTLTOOL_OAF_RULE='%.oaf: %.oaf.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -p $(top_srcdir)/po $< [$]@'
+ INTLTOOL_PONG_RULE='%.pong: %.pong.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+ INTLTOOL_SERVER_RULE='%.server: %.server.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -o -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+ INTLTOOL_SHEET_RULE='%.sheet: %.sheet.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+INTLTOOL_SOUNDLIST_RULE='%.soundlist: %.soundlist.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+ INTLTOOL_UI_RULE='%.ui: %.ui.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+ INTLTOOL_XML_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+ INTLTOOL_XML_NOMERGE_RULE='%.xml: %.xml.in $(INTLTOOL_MERGE) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u /tmp $< [$]@'
+ INTLTOOL_XAM_RULE='%.xam: %.xml.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+ INTLTOOL_KBD_RULE='%.kbd: %.kbd.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -x -u -m -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+ INTLTOOL_CAVES_RULE='%.caves: %.caves.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+ INTLTOOL_SCHEMAS_RULE='%.schemas: %.schemas.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -s -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+ INTLTOOL_THEME_RULE='%.theme: %.theme.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+ INTLTOOL_SERVICE_RULE='%.service: %.service.in $(INTLTOOL_MERGE) $(wildcard $(top_srcdir)/po/*.po) ; LC_ALL=C $(INTLTOOL_MERGE) -d -u -c $(top_builddir)/po/.intltool-merge-cache $(top_srcdir)/po $< [$]@'
+
+AC_SUBST(INTLTOOL_DESKTOP_RULE)
+AC_SUBST(INTLTOOL_DIRECTORY_RULE)
+AC_SUBST(INTLTOOL_KEYS_RULE)
+AC_SUBST(INTLTOOL_PROP_RULE)
+AC_SUBST(INTLTOOL_OAF_RULE)
+AC_SUBST(INTLTOOL_PONG_RULE)
+AC_SUBST(INTLTOOL_SERVER_RULE)
+AC_SUBST(INTLTOOL_SHEET_RULE)
+AC_SUBST(INTLTOOL_SOUNDLIST_RULE)
+AC_SUBST(INTLTOOL_UI_RULE)
+AC_SUBST(INTLTOOL_XAM_RULE)
+AC_SUBST(INTLTOOL_KBD_RULE)
+AC_SUBST(INTLTOOL_XML_RULE)
+AC_SUBST(INTLTOOL_XML_NOMERGE_RULE)
+AC_SUBST(INTLTOOL_CAVES_RULE)
+AC_SUBST(INTLTOOL_SCHEMAS_RULE)
+AC_SUBST(INTLTOOL_THEME_RULE)
+AC_SUBST(INTLTOOL_SERVICE_RULE)
+
+# Use the tools built into the package, not the ones that are installed.
+AC_SUBST(INTLTOOL_EXTRACT, '$(top_builddir)/intltool-extract')
+AC_SUBST(INTLTOOL_MERGE, '$(top_builddir)/intltool-merge')
+AC_SUBST(INTLTOOL_UPDATE, '$(top_builddir)/intltool-update')
+
+AC_PATH_PROG(INTLTOOL_PERL, perl)
+if test -z "$INTLTOOL_PERL"; then
+ AC_MSG_ERROR([perl not found; required for intltool])
+fi
+if test -z "`$INTLTOOL_PERL -v | fgrep '5.' 2> /dev/null`"; then
+ AC_MSG_ERROR([perl 5.x required for intltool])
+fi
+if test "x$2" != "xno-xml"; then
+ AC_MSG_CHECKING([for XML::Parser])
+ if `$INTLTOOL_PERL -e "require XML::Parser" 2>/dev/null`; then
+ AC_MSG_RESULT([ok])
+ else
+ AC_MSG_ERROR([XML::Parser perl module is required for intltool])
+ fi
+fi
+
+AC_PATH_PROG(INTLTOOL_ICONV, iconv, iconv)
+AC_PATH_PROG(INTLTOOL_MSGFMT, msgfmt, msgfmt)
+AC_PATH_PROG(INTLTOOL_MSGMERGE, msgmerge, msgmerge)
+AC_PATH_PROG(INTLTOOL_XGETTEXT, xgettext, xgettext)
+
+# Substitute ALL_LINGUAS so we can use it in po/Makefile
+AC_SUBST(ALL_LINGUAS)
+
+# Set DATADIRNAME correctly if it is not set yet
+# (copied from glib-gettext.m4)
+if test -z "$DATADIRNAME"; then
+ AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
+ return _nl_msg_cat_cntr],
+ [DATADIRNAME=share],
+ [case $host in
+ *-*-solaris*)
+ dnl On Solaris, if bind_textdomain_codeset is in libc,
+ dnl GNU format message catalog is always supported,
+ dnl since both are added to the libc all together.
+ dnl Hence, we'd like to go with DATADIRNAME=share
+ dnl in this case.
+ AC_CHECK_FUNC(bind_textdomain_codeset,
+ [DATADIRNAME=share], [DATADIRNAME=lib])
+ ;;
+ *)
+ [DATADIRNAME=lib]
+ ;;
+ esac])
+fi
+AC_SUBST(DATADIRNAME)
+
+IT_PO_SUBDIR([po])
+
+dnl The following is very similar to
+dnl
+dnl AC_CONFIG_FILES([intltool-extract intltool-merge intltool-update])
+dnl
+dnl with the following slight differences:
+dnl - the *.in files are in ac_aux_dir,
+dnl - if the file haven't changed upon reconfigure, it's not touched,
+dnl - the evaluation of the third parameter enables a hack which computes
+dnl the actual value of $libdir,
+dnl - the user sees "executing intltool commands", instead of
+dnl "creating intltool-extract" and such.
+dnl
+dnl Nothing crucial here, and we could use AC_CONFIG_FILES, if there were
+dnl a reason for it.
+
+AC_CONFIG_COMMANDS([intltool], [
+
+for file in intltool-extract intltool-merge intltool-update; do
+ sed -e "s|@INTLTOOL_EXTRACT@|`pwd`/intltool-extract|g" \
+ -e "s|@INTLTOOL_LIBDIR@|${INTLTOOL_LIBDIR}|g" \
+ -e "s|@INTLTOOL_ICONV@|${INTLTOOL_ICONV}|g" \
+ -e "s|@INTLTOOL_MSGFMT@|${INTLTOOL_MSGFMT}|g" \
+ -e "s|@INTLTOOL_MSGMERGE@|${INTLTOOL_MSGMERGE}|g" \
+ -e "s|@INTLTOOL_XGETTEXT@|${INTLTOOL_XGETTEXT}|g" \
+ -e "s|@INTLTOOL_PERL@|${INTLTOOL_PERL}|g" \
+ < ${ac_aux_dir}/${file}.in > ${file}.out
+ if cmp -s ${file} ${file}.out 2>/dev/null; then
+ rm -f ${file}.out
+ else
+ mv -f ${file}.out ${file}
+ fi
+ chmod ugo+x ${file}
+ chmod u+w ${file}
+done
+
+],
+[INTLTOOL_PERL='${INTLTOOL_PERL}' ac_aux_dir='${ac_aux_dir}'
+prefix="$prefix" exec_prefix="$exec_prefix" INTLTOOL_LIBDIR="$libdir"
+INTLTOOL_EXTRACT='${INTLTOOL_EXTRACT}' INTLTOOL_ICONV='${INTLTOOL_ICONV}'
+INTLTOOL_MSGFMT='${INTLTOOL_MSGFMT}' INTLTOOL_MSGMERGE='${INTLTOOL_MSGMERGE}'
+INTLTOOL_XGETTEXT='${INTLTOOL_XGETTEXT}'])
+
+])
+
+
+# IT_PO_SUBDIR(DIRNAME)
+# ---------------------
+# All po subdirs have to be declared with this macro; the subdir "po" is
+# declared by IT_PROG_INTLTOOL.
+#
+AC_DEFUN([IT_PO_SUBDIR],
+[AC_PREREQ([2.53])dnl We use ac_top_srcdir inside AC_CONFIG_COMMANDS.
+dnl
+dnl The following CONFIG_COMMANDS should be exetuted at the very end
+dnl of config.status.
+AC_CONFIG_COMMANDS_PRE([
+ AC_CONFIG_COMMANDS([$1/stamp-it], [
+ rm -f "$1/stamp-it" "$1/stamp-it.tmp" "$1/POTFILES" "$1/Makefile.tmp"
+ >"$1/stamp-it.tmp"
+ [sed '/^#/d
+ s/^[[].*] *//
+ /^[ ]*$/d
+ '"s|^| $ac_top_srcdir/|" \
+ "$srcdir/$1/POTFILES.in" | sed '$!s/$/ \\/' >"$1/POTFILES"
+ ]
+ if test ! -f "$1/Makefile"; then
+ AC_MSG_ERROR([$1/Makefile is not ready.])
+ fi
+ mv "$1/Makefile" "$1/Makefile.tmp"
+ [sed '/^POTFILES =/,/[^\\]$/ {
+ /^POTFILES =/!d
+ r $1/POTFILES
+ }
+ ' "$1/Makefile.tmp" >"$1/Makefile"]
+ rm -f "$1/Makefile.tmp"
+ mv "$1/stamp-it.tmp" "$1/stamp-it"
+ ])
+])dnl
+])
+
+
+# deprecated macros
+AU_ALIAS([AC_PROG_INTLTOOL], [IT_PROG_INTLTOOL])
+# A hint is needed for aclocal from Automake <= 1.9.4:
+# AC_DEFUN([AC_PROG_INTLTOOL], ...)
+
+
+# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+ [AM_AUTOMAKE_VERSION([1.9.6])])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 7
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 3
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
+AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.58])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $1 | $1:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+AC_DEFUN([AM_MAINTAINER_MODE],
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode is disabled by default
+ AC_ARG_ENABLE(maintainer-mode,
+[ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer],
+ USE_MAINTAINER_MODE=$enableval,
+ USE_MAINTAINER_MODE=no)
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST(MAINT)dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+#
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake. There are at least two reasons why we must not
+# use `-m 0755':
+# - it causes special bits like SGID to be ignored,
+# - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out. Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
+AC_DEFUN([AM_PROG_MKDIR_P],
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
+ else
+ mkdir_p='$(install_sh) -d'
+ fi
+fi
+AC_SUBST([mkdir_p])])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+dnl $Id: xdt-depends.m4 21591 2006-05-08 09:10:26Z benny $
+dnl
+dnl Copyright (c) 2002-2006
+dnl The Xfce development team. All rights reserved.
+dnl
+dnl Written for Xfce by Benedikt Meurer <benny at xfce.org>.
+dnl
+dnl This program is free software; you can redistribute it and/or modify it
+dnl under the terms of the GNU General Public License as published by the Free
+dnl Software Foundation; either version 2 of the License, or (at your option)
+dnl any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful, but WITHOUT
+dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+dnl more details.
+dnl
+dnl You should have received a copy of the GNU General Public License along with
+dnl this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+dnl Place, Suite 330, Boston, MA 02111-1307 USA
+dnl
+dnl xdt-depends
+dnl -----------
+dnl Contains M4 macros to check for software dependencies.
+dnl Partly based on prior work of the XDG contributors.
+dnl
+
+
+
+dnl We need recent a autoconf version
+AC_PREREQ([2.53])
+
+
+
+dnl XDT_PROG_PKG_CONFIG()
+dnl
+dnl Checks for the freedesktop.org pkg-config
+dnl utility and sets the PKG_CONFIG environment
+dnl variable to the full path if found.
+dnl
+AC_DEFUN([XDT_PROG_PKG_CONFIG],
+[
+ # minimum supported version of pkg-config
+ xdt_cv_PKG_CONFIG_MIN_VERSION=0.9.0
+
+ # lookup pkg-config utility
+ if test x"$PKG_CONFIG" = x""; then
+ AC_PATH_PROG([PKG_CONFIG], [pkg-config], [no])
+
+ if test x"$PKG_CONFIG" = x"no"; then
+ echo "*** The pkg-config utility could not be found on your system."
+ echo "*** Make sure it is in your path, or set the PKG_CONFIG"
+ echo "*** environment variable to the full path to pkg-config."
+ echo "*** You can download pkg-config from the freedesktop.org"
+ echo "*** software repository at"
+ echo "***"
+ echo "*** http://www.freedesktop.org/software/pkgconfig"
+ echo "***"
+ exit 1
+ fi
+
+ # check pkg-config version
+ AC_MSG_CHECKING([for pkg-config >= $xdt_cv_PKG_CONFIG_MIN_VERSION])
+ if $PKG_CONFIG --atleast-pkgconfig-version $xdt_cv_PKG_CONFIG_MIN_VERSION; then
+ xdt_cv_PKG_CONFIG_VERSION=`$PKG_CONFIG --version`
+ AC_MSG_RESULT([$xdt_cv_PKG_CONFIG_VERSION])
+ else
+ xdt_cv_PKG_CONFIG_VERSION=`$PKG_CONFIG --version`
+ AC_MSG_RESULT([$xdt_cv_PKG_CONFIG_VERSION])
+ echo "*** Your version of pkg-config is too old. You need atleast"
+ echo "*** pkg-config $xdt_cv_PKG_CONFIG_MIN_VERSION or newer. You can download pkg-config "
+ echo "*** from the freedesktop.org software repository at"
+ echo "***"
+ echo "*** http://www.freedesktop.org/software/pkgconfig"
+ echo "***"
+ exit 1
+ fi
+ fi
+])
+
+
+
+dnl XDT_CHECK_PACKAGE(varname, package, version, [action-if], [action-if-not])
+dnl
+dnl Checks if "package" >= "version" is installed on the
+dnl target system, using the pkg-config utility. If the
+dnl dependency is met, "varname"_CFLAGS, "varname"_LIBS,
+dnl "varname"_VERSION and "varname"_REQUIRED_VERSION
+dnl will be set and marked for substition.
+dnl
+dnl "varname"_REQUIRED_VERSION will be set to the value of
+dnl "version". This is mostly useful to automatically
+dnl place the correct version information into the RPM
+dnl .spec file.
+dnl
+dnl In addition, if the dependency is met, "action-if" will
+dnl be executed if given.
+dnl
+dnl If the package check fails, "action-if-not" will be
+dnl executed. If this parameter isn't specified, a diagnostic
+dnl message will be printed and the configure script will
+dnl be terminated with exit code 1.
+dnl
+AC_DEFUN([XDT_CHECK_PACKAGE],
+[
+ XDT_PROG_PKG_CONFIG()
+
+ AC_MSG_CHECKING([for $2 >= $3])
+ if $PKG_CONFIG "--atleast-version=$3" "$2" >/dev/null 2>&1; then
+ $1_VERSION=`$PKG_CONFIG --modversion "$2"`
+ AC_MSG_RESULT([$$1_VERSION])
+
+ AC_MSG_CHECKING([$1_CFLAGS])
+ $1_CFLAGS=`$PKG_CONFIG --cflags "$2"`
+ AC_MSG_RESULT([$$1_CFLAGS])
+
+ AC_MSG_CHECKING([$1_LIBS])
+ $1_LIBS=`$PKG_CONFIG --libs "$2"`
+ AC_MSG_RESULT([$$1_LIBS])
+
+ $1_REQUIRED_VERSION=$3
+
+ AC_SUBST([$1_VERSION])
+ AC_SUBST([$1_CFLAGS])
+ AC_SUBST([$1_LIBS])
+ AC_SUBST([$1_REQUIRED_VERSION])
+
+ ifelse([$4], , , [$4])
+ elif $PKG_CONFIG --exists "$2" >/dev/null 2>&1; then
+ xdt_cv_version=`$PKG_CONFIG --modversion "$2"`
+ AC_MSG_RESULT([found, but $xdt_cv_version])
+
+ ifelse([$5], ,
+ [
+ echo "*** The required package $2 was found on your system,"
+ echo "*** but the installed version ($xdt_cv_version) is too old."
+ echo "*** Please upgrade $2 to atleast version $3, or adjust"
+ echo "*** the PKG_CONFIG_PATH environment variable if you installed"
+ echo "*** the new version of the package in a nonstandard prefix so"
+ echo "*** pkg-config is able to find it."
+ exit 1
+ ], [$5])
+ else
+ AC_MSG_RESULT([not found])
+
+ ifelse([$5], ,
+ [
+ echo "*** The required package $2 was not found on your system."
+ echo "*** Please install $2 (atleast version $3) or adjust"
+ echo "*** the PKG_CONFIG_PATH environment variable if you"
+ echo "*** installed the package in a nonstandard prefix so that"
+ echo "*** pkg-config is able to find it."
+ exit 1
+ ], [$5])
+ fi
+])
+
+
+
+dnl XDT_CHECK_OPTIONAL_PACKAGE(varname, package, version, optionname, helpstring, [default])
+dnl
+dnl Checks for an optional dependency on "package" >= "version". "default"
+dnl can be "yes" or "no" (defaults to "yes" if not specified) and controls
+dnl whether configure should check this dependency by default, or only if
+dnl the user explicitly enables it using a command line switch.
+dnl
+dnl This macro automatically adds a commandline switch based on the "optionname"
+dnl parameter (--enable-optionname/--disable-optionname), which allows the
+dnl user to explicitly control whether this optional dependency should be
+dnl enabled or not. The "helpstring" parameter gives a brief(!) description
+dnl about this dependency.
+dnl
+dnl If the user chose to enable this dependency and the required package
+dnl was found, this macro defines the variable "varname"_FOUND and sets it
+dnl to the string "yes", in addition to the 4 variables set by XDT_CHECK_PACKAGE.
+dnl But "varname"_FOUND will not be marked for substition. Furthermore,
+dnl a CPP define HAVE_"varname" will be placed in config.h (or added to
+dnl the cc command line, depending on your configure.ac) and set to
+dnl 1.
+dnl
+AC_DEFUN([XDT_CHECK_OPTIONAL_PACKAGE],
+[
+ AC_REQUIRE([XDT_PROG_PKG_CONFIG])
+
+ AC_ARG_ENABLE([$4],
+AC_HELP_STRING([--enable-$4], [Enable checking for $5 (default=m4_default([$6], [yes]))])
+AC_HELP_STRING([--disable-$4], [Disable checking for $5]),
+ [xdt_cv_$1_check=$enableval], [xdt_cv_$1_check=m4_default([$6], [yes])])
+
+ if test x"$xdt_cv_$1_check" = x"yes"; then
+ if $PKG_CONFIG --exists "$2 >= $3" >/dev/null 2>&1; then
+ XDT_CHECK_PACKAGE([$1], [$2], [$3],
+ [
+ AC_DEFINE([HAVE_$1], [1], [Define if $2 >= $3 present])
+ $1_FOUND="yes"
+ ])
+ else
+ AC_MSG_CHECKING([for optional package $2 >= $3])
+ AC_MSG_RESULT([not found])
+ fi
+ else
+ AC_MSG_CHECKING([for optional package $2])
+ AC_MSG_RESULT([disabled])
+ fi
+
+ AM_CONDITIONAL([HAVE_$1], [test x"$$1_FOUND" = x"yes"])
+])
+
+
+
+dnl BM_DEPEND(varname, package, version)
+dnl
+dnl Simple wrapper for XDT_CHECK_PACKAGE("varname", "package", "version"). Kept
+dnl for backward compatibility. Will be removed in the future.
+dnl
+AC_DEFUN([BM_DEPEND],
+[
+ XDT_CHECK_PACKAGE([$1], [$2], [$3])
+])
+
+
+
+dnl BM_DEPEND_CHECK(var, pkg, version, name, helpstring, default)
+dnl
+dnl Simple wrapper for XDT_CHECK_OPTIONAL_PACKAGE(). Kept for backward
+dnl compatibility. Will be removed in the future.
+dnl
+AC_DEFUN([BM_DEPEND_CHECK],
+[
+ XDT_CHECK_OPTIONAL_PACKAGE([$1], [$2], [$3], [$4], [$5], [$6])
+])
+
+
+
+dnl XDT_CHECK_LIBX11()
+dnl
+dnl Executes various checks for X11. Sets LIBX11_CFLAGS, LIBX11_LDFLAGS
+dnl and LIBX11_LIBS (and marks them for substitution). In addition
+dnl HAVE_LIBX11 is set to 1 in config.h, if the X window system and
+dnl the development files are detected on the target system.
+dnl
+AC_DEFUN([XDT_CHECK_LIBX11],
+[
+ AC_REQUIRE([AC_PATH_XTRA])
+
+ LIBX11_CFLAGS= LIBX11_LDFLAGS= LIBX11_LIBS=
+ if test x"$no_x" != x"yes"; then
+ AC_CHECK_LIB([X11], [main],
+ [
+ AC_DEFINE([HAVE_LIBX11], [1], [Define if libX11 is available])
+ LIBX11_CFLAGS="$X_CFLAGS"
+ for option in $X_PRE_LIBS $X_EXTRA_LIBS $X_LIBS; do
+ case "$option" in
+ -L*)
+ path=`echo $option | sed 's/^-L//'`
+ if test x"$path" != x""; then
+ LIBX11_LDFLAGS="$LIBX11_LDFLAGS -L$path"
+ fi
+ ;;
+ *)
+ LIBX11_LIBS="$LIBX11_LIBS $option"
+ ;;
+ esac
+ done
+ if ! echo $LIBX11_LIBS | grep -- '-lX11' >/dev/null; then
+ LIBX11_LIBS="$LIBX11_LIBS -lX11"
+ fi
+ ], [], [$X_CFLAGS $X_PRE_LIBS $X_EXTRA_LIBS $X_LIBS])
+ fi
+ AC_SUBST([LIBX11_CFLAGS])
+ AC_SUBST([LIBX11_LDFLAGS])
+ AC_SUBST([LIBX11_LIBS])
+])
+
+
+
+dnl XDT_CHECK_LIBX11_REQUIRE()
+dnl
+dnl Similar to XDT_CHECK_LIBX11(), but terminates with an error if
+dnl the X window system and development files aren't detected on the
+dnl target system.
+dnl
+AC_DEFUN([XDT_CHECK_LIBX11_REQUIRE],
+[
+ AC_REQUIRE([XDT_CHECK_LIBX11])
+
+ if test x"$no_x" = x"yes"; then
+ AC_MSG_ERROR([X Window system libraries and header files are required])
+ fi
+])
+
+
+
+dnl XDT_CHECK_LIBSM()
+dnl
+dnl Checks whether the session management library is present on the
+dnl target system, and sets LIBSM_CFLAGS, LIBSM_LDFLAGS and LIBSM_LIBS
+dnl properly. In addition, HAVE_LIBSM will be set to 1 in config.h
+dnl if libSM is detected.
+dnl
+AC_DEFUN([XDT_CHECK_LIBSM],
+[
+ AC_REQUIRE([XDT_CHECK_LIBX11])
+
+ LIBSM_CFLAGS= LIBSM_LDFLAGS= LIBSM_LIBS=
+ if test x"$no_x" != x"yes"; then
+ AC_CHECK_LIB([SM], [SmcSaveYourselfDone],
+ [
+ AC_DEFINE([HAVE_LIBSM], [1], [Define if libSM is available])
+ LIBSM_CFLAGS="$LIBX11_CFLAGS"
+ LIBSM_LDFLAGS="$LIBX11_LDFLAGS"
+ LIBSM_LIBS="$LIBX11_LIBS"
+ if ! echo $LIBSM_LIBS | grep -- '-lSM' >/dev/null; then
+ LIBSM_LIBS="$LIBSM_LIBS -lSM -lICE"
+ fi
+ ], [], [$LIBX11_CFLAGS $LIBX11_LDFLAGS $LIBX11_LIBS -lICE])
+ fi
+ AC_SUBST([LIBSM_CFLAGS])
+ AC_SUBST([LIBSM_LDFLAGS])
+ AC_SUBST([LIBSM_LIBS])
+])
+
+
+
+dnl XDT_CHECK_LIBXPM()
+dnl
+dnl Checks if the Xpm library is present on the target system, and
+dnl sets LIBXPM_CFLAGS, LIBXPM_LDFLAGS and LIBXPM_LIBS. In addition,
+dnl HAVE_LIBXPM will be set to 1 in config.h if libXpm is detected.
+dnl
+AC_DEFUN([XDT_CHECK_LIBXPM],
+[
+ AC_REQUIRE([XDT_CHECK_LIBX11])
+
+ LIBXPM_CFLAGS= LIBXPM_LDFLAGS= LIBXPM_LIBS=
+ if test "$no_x" != "yes"; then
+ AC_CHECK_LIB([Xpm], [main],
+ [
+ AC_DEFINE([HAVE_LIBXPM], [1], [Define if libXpm is available])
+ LIBXPM_CFLAGS="$LIBX11_CFLAGS"
+ LIBXPM_LDFLAGS="$LIBX11_LDFLAGS"
+ LIBXPM_LIBS="$LIBX11_LIBS"
+ if ! echo $LIBXPM_LIBS | grep -- '-lXpm' >/dev/null; then
+ LIBXPM_LIBS="$LIBXPM_LIBS -lXpm"
+ fi
+ ], [], [$LIBX11_CFLAGS $LIBX11_LDFLAGS $LIBX11_LIBS -lXpm])
+ fi
+ AC_SUBST([LIBXPM_CFLAGS])
+ AC_SUBST([LIBXPM_LDFLAGS])
+ AC_SUBST([LIBXPM_LIBS])
+])
+
+
+
+dnl XDT_CHECK_LIBXPM_REQUIRE()
+dnl
+dnl Similar to XDT_CHECK_LIBXPM(), but fails if the Xpm library isn't
+dnl present on the target system.
+dnl
+AC_DEFUN([XDT_CHECK_LIBXPM_REQUIRE],
+[
+ AC_REQUIRE([XDT_CHECK_LIBX11_REQUIRE])
+ AC_REQUIRE([XDT_CHECK_LIBXPM])
+
+ if test x"$LIBXPM_LIBS" = x""; then
+ AC_MSG_ERROR([The Xpm library was not found on your system])
+ fi
+])
+
+
+
+dnl BM_LIBX11()
+dnl
+dnl Simple wrapper for XDT_CHECK_LIBX11. Kept for backward
+dnl compatibility. Will be removed in the future.
+dnl
+AC_DEFUN([BM_LIBX11],
+[
+ AC_REQUIRE([XDT_CHECK_LIBX11])
+])
+
+
+
+dnl BM_LIBX11_REQUIRE()
+dnl
+dnl Simple wrapper for XDT_CHECK_LIBX11_REQUIRE. Kept for backward
+dnl compatibility. Will be removed in the future.
+dnl
+AC_DEFUN([BM_LIBX11_REQUIRE],
+[
+ AC_REQUIRE([XDT_CHECK_LIBX11_REQUIRE])
+])
+
+
+
+dnl BM_LIBSM()
+dnl
+dnl Simple wrapper for XDT_CHECK_LIBSM. Kept for backward
+dnl compatibility. Will be removed in the future.
+dnl
+AC_DEFUN([BM_LIBSM],
+[
+ AC_REQUIRE([XDT_CHECK_LIBSM])
+])
+
+
+
+dnl BM_LIBXPM
+dnl
+dnl Simple wrapper for XDT_CHECK_LIBXPM. Kept for backward
+dnl compatibility. Will be removed in the future.
+dnl
+AC_DEFUN([BM_LIBXPM],
+[
+ AC_REQUIRE([XDT_CHECK_LIBXPM])
+])
+
+
+
+dnl BM_LIBXPM_REQUIRE
+dnl
+dnl Simple wrapper for XDT_CHECK_LIBXPM_REQUIRE. Kept for
+dnl backward compatibility. Will be removed in the future.
+dnl
+AC_DEFUN([BM_LIBXPM_REQUIRE],
+[
+ AC_REQUIRE([XDT_CHECK_LIBXPM_REQUIRE])
+])
+
+
+dnl $Id: xdt-features.m4 22990 2006-09-02 11:33:28Z benny $
+dnl
+dnl Copyright (c) 2002-2006
+dnl The Xfce development team. All rights reserved.
+dnl
+dnl Written for Xfce by Benedikt Meurer <benny at xfce.org>.
+dnl
+dnl This program is free software; you can redistribute it and/or modify it
+dnl under the terms of the GNU General Public License as published by the Free
+dnl Software Foundation; either version 2 of the License, or (at your option)
+dnl any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful, but WITHOUT
+dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+dnl more details.
+dnl
+dnl You should have received a copy of the GNU General Public License along with
+dnl this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+dnl Place, Suite 330, Boston, MA 02111-1307 USA
+dnl
+dnl xdt-depends
+dnl -----------
+dnl Contains M4 macros to check for software dependencies.
+dnl Partly based on prior work of the XDG contributors.
+dnl
+
+
+
+dnl We need recent a autoconf version
+AC_PREREQ([2.53])
+
+
+
+dnl XDT_FEATURE_DEBUG()
+dnl
+AC_DEFUN([XDT_FEATURE_DEBUG],
+[
+ AC_ARG_ENABLE([debug],
+AC_HELP_STRING([--enable-debug[=yes|no|full]], [Build with debugging support])
+AC_HELP_STRING([--disable-debug], [Include no debugging support [default]]),
+ [], [enable_debug=no])
+
+ AC_MSG_CHECKING([whether to build with debugging support])
+ if test x"$enable_debug" != x"no"; then
+ AC_DEFINE([DEBUG], [1], [Define for debugging support])
+
+ if test x"$GCC" = x"yes"; then
+ xdt_cv_additional_CFLAGS="-Wall"
+ fi
+ xdt_cv_additional_CFLAGS="$xdt_cv_additional_CFLAGS -DXFCE_DISABLE_DEPRECATED"
+
+ if test x"$enable_debug" = x"full"; then
+ AC_DEFINE([DEBUG_TRACE], [1], [Define for tracing support])
+ if test x"$GCC" = x"yes"; then
+ xdt_cv_additional_CFLAGS="-g3 -Werror $xdt_cv_additional_CFLAGS"
+ fi
+ AC_MSG_RESULT([full])
+ else
+ if test x"$GCC" = x"yes"; then
+ xdt_cv_additional_CFLAGS="-g $xdt_cv_additional_CFLAGS"
+ fi
+ AC_MSG_RESULT([yes])
+ fi
+
+ CFLAGS="$CFLAGS $xdt_cv_additional_CFLAGS"
+ CXXFLAGS="$CXXFLAGS $xdt_cv_additional_CFLAGS"
+ else
+ AC_MSG_RESULT([no])
+ fi
+])
+
+
+
+dnl BM_DEBUG_SUPPORT()
+dnl
+AC_DEFUN([BM_DEBUG_SUPPORT],
+[
+dnl # --enable-debug
+ AC_REQUIRE([XDT_FEATURE_DEBUG])
+
+dnl # --enable-profiling
+ AC_ARG_ENABLE([profiling],
+AC_HELP_STRING([--enable-profiling],
+ [Generate extra code to write profile information])
+AC_HELP_STRING([--disable-profiling],
+ [No extra code for profiling (default)]),
+ [], [enable_profiling=no])
+
+ AC_MSG_CHECKING([whether to build with profiling support])
+ if test x"$enable_profiling" != x"no"; then
+ CFLAGS="$CFLAGS -pg"
+ LDFLAGS="$LDFLAGS -pg"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+
+dnl # --enable-gcov
+ AC_ARG_ENABLE([gcov],
+AC_HELP_STRING([--enable-gcov],
+ [compile with coverage profiling instrumentation (gcc only)])
+AC_HELP_STRING([--disable-gcov],
+ [do not generate coverage profiling instrumentation (default)]),
+ [], [enable_gcov=no])
+
+ AC_MSG_CHECKING([whether to compile with coverage profiling instrumentation])
+ if test x"$enable_gcov" != x"no"; then
+ CFLAGS="$CFLAGS -fprofile-arcs -ftest-coverage"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+
+dnl # --disable-asserts
+ AC_ARG_ENABLE([asserts],
+AC_HELP_STRING([--disable-asserts], [Disable assertions [DANGEROUS]]),
+ [], [enable_asserts=yes])
+
+ AC_MSG_CHECKING([whether to disable assertions])
+ if test x"$enable_asserts" = x"no"; then
+ AC_MSG_RESULT([yes])
+ CPPFLAGS="$CPPFLAGS -DG_DISABLE_CHECKS -DG_DISABLE_ASSERT"
+ CPPFLAGS="$CPPFLAGS -DG_DISABLE_CAST_CHECKS"
+ else
+ AC_MSG_RESULT([no])
+ fi
+
+dnl # --enable-final
+ AC_REQUIRE([AC_PROG_LD])
+ AC_ARG_ENABLE([final],
+AC_HELP_STRING([--enable-final], [Build final version]),
+ [], [enable_final=yes])
+
+ AC_MSG_CHECKING([whether to build final version])
+ if test x"$enable_final" = x"yes"; then
+ AC_MSG_RESULT([yes])
+ AC_MSG_CHECKING([whether $LD accepts -O1])
+ case `$LD -O1 -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ LDFLAGS="$LDFLAGS -Wl,-O1"
+ AC_MSG_RESULT([yes])
+ ;;
+ *)
+ AC_MSG_RESULT([no])
+ ;;
+ esac
+ else
+ AC_MSG_RESULT([no])
+ fi
+])
+
+dnl $Id: xdt-i18n.m4 21591 2006-05-08 09:10:26Z benny $
+dnl
+dnl Copyright (c) 2002-2006
+dnl The Xfce development team. All rights reserved.
+dnl
+dnl Written for Xfce by Benedikt Meurer <benny at xfce.org>.
+dnl
+dnl This program is free software; you can redistribute it and/or modify it
+dnl under the terms of the GNU General Public License as published by the Free
+dnl Software Foundation; either version 2 of the License, or (at your option)
+dnl any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful, but WITHOUT
+dnl ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+dnl FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+dnl more details.
+dnl
+dnl You should have received a copy of the GNU General Public License along with
+dnl this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+dnl Place, Suite 330, Boston, MA 02111-1307 USA
+dnl
+dnl xdt-i18n
+dnl --------
+dnl Internalization M4 macros.
+dnl
+
+
+dnl XDT_I18N(LINGUAS [, PACKAGE])
+dnl
+dnl This macro takes care of setting up everything for i18n support.
+dnl
+dnl If PACKAGE isn't specified, it defaults to the package tarname; see
+dnl the description of AC_INIT() for an explanation of what makes up
+dnl the package tarname. Normally, you don't need to specify PACKAGE,
+dnl but you can stick with the default.
+dnl
+AC_DEFUN([XDT_I18N],
+[
+ dnl Substitute GETTEXT_PACKAGE variable
+ GETTEXT_PACKAGE=m4_default([$2], [AC_PACKAGE_TARNAME()])
+ AC_DEFINE_UNQUOTED([GETTEXT_PACKAGE], ["$GETTEXT_PACKAGE"], [Name of default gettext domain])
+ AC_SUBST([GETTEXT_PACKAGE])
+
+ dnl gettext and stuff
+ ALL_LINGUAS="$1"
+ AM_GLIB_GNU_GETTEXT()
+
+ dnl This is required on some Linux systems
+ AC_CHECK_FUNC([bind_textdomain_codeset])
+
+ dnl Determine where to install locale files
+ AC_MSG_CHECKING([for locales directory])
+ AC_ARG_WITH([locales-dir],
+ [
+ AC_HELP_STRING([--with-locales-dir=DIR], [Install locales into DIR])
+ ], [localedir=$withval],
+ [
+ if test x"$CATOBJEXT" = x".mo"; then
+ localedir=$libdir/locale
+ else
+ localedir=$datadir/locale
+ fi
+ ])
+ AC_MSG_RESULT([$localedir])
+ AC_SUBST([localedir])
+
+ dnl Determine additional xgettext flags
+ AC_MSG_CHECKING([for additional xgettext flags])
+ if test x"$XGETTEXT_ARGS" = x""; then
+ XGETTEXT_ARGS="--keyword=Q_";
+ else
+ XGETTEXT_ARGS="$XGETTEXT_ARGS --keyword=Q_";
+ fi
+ AC_SUBST([XGETTEXT_ARGS])
+ AC_MSG_RESULT([$XGETTEXT_ARGS])
+])
+
+
+
+dnl BM_I18N(PACKAGE, LINGUAS)
+dnl
+dnl Simple wrapper for XDT_I18N(LINGUAS, PACKAGE). Kept for
+dnl backward compatibility. Will be removed in the
+dnl future.
+dnl
+AC_DEFUN([BM_I18N],
+[
+ XDT_I18N([$2], [$1])
+])
+
+
Property changes on: xfce4-cpugraph-plugin/trunk/aclocal.m4
___________________________________________________________________
Name: svn:eol-style
+ native
Added: xfce4-cpugraph-plugin/trunk/compile
===================================================================
--- xfce4-cpugraph-plugin/trunk/compile (rev 0)
+++ xfce4-cpugraph-plugin/trunk/compile 2007-11-22 08:07:56 UTC (rev 3616)
@@ -0,0 +1,142 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand `-c -o'.
+
+scriptversion=2005-05-14.22
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey at cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake at gnu.org> or send patches to
+# <automake-patches at gnu.org>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand `-c -o'.
+Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file `INSTALL'.
+
+Report bugs to <bug-automake at gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+esac
+
+ofile=
+cfile=
+eat=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as `compile cc -o foo foo.c'.
+ # So we strip `-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no `-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # `.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use `[/.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
Property changes on: xfce4-cpugraph-plugin/trunk/compile
___________________________________________________________________
Name: svn:executable
+ *
Name: svn:eol-style
+ native
Added: xfce4-cpugraph-plugin/trunk/config.h.in
===================================================================
--- xfce4-cpugraph-plugin/trunk/config.h.in (rev 0)
+++ xfce4-cpugraph-plugin/trunk/config.h.in 2007-11-22 08:07:56 UTC (rev 3616)
@@ -0,0 +1,96 @@
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define for debugging support */
+#undef DEBUG
+
+/* Define for tracing support */
+#undef DEBUG_TRACE
+
+/* always defined to indicate that i18n is enabled */
+#undef ENABLE_NLS
+
+/* Name of default gettext domain */
+#undef GETTEXT_PACKAGE
+
+/* Define to 1 if you have the `bind_textdomain_codeset' function. */
+#undef HAVE_BIND_TEXTDOMAIN_CODESET
+
+/* Define to 1 if you have the `dcgettext' function. */
+#undef HAVE_DCGETTEXT
+
+/* Define if the GNU gettext() function is already present or preinstalled. */
+#undef HAVE_GETTEXT
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define if your <locale.h> file defines LC_MESSAGES. */
+#undef HAVE_LC_MESSAGES
+
+/* Define to 1 if you have the <locale.h> header file. */
+#undef HAVE_LOCALE_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to 1 if on AIX 3.
+ System headers sometimes define this.
+ We just want to avoid a redefinition error message. */
+#ifndef _ALL_SOURCE
+# undef _ALL_SOURCE
+#endif
+
+/* Define to 1 if on MINIX. */
+#undef _MINIX
+
+/* Define to 2 if the system does not provide POSIX.1 features except with
+ this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define to 1 if you need to in order for `stat' and other things to work. */
+#undef _POSIX_SOURCE
Property changes on: xfce4-cpugraph-plugin/trunk/config.h.in
___________________________________________________________________
Name: svn:eol-style
+ native
Added: xfce4-cpugraph-plugin/trunk/depcomp
===================================================================
--- xfce4-cpugraph-plugin/trunk/depcomp (rev 0)
+++ xfce4-cpugraph-plugin/trunk/depcomp 2007-11-22 08:07:56 UTC (rev 3616)
@@ -0,0 +1,530 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2005-07-09.11
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva at dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputing dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake at gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> $depfile
+ echo >> $depfile
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> $depfile
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts `$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
+ if test "$libtool" = yes; then
+ "$@" -Wc,-M
+ else
+ "$@" -M
+ fi
+ stat=$?
+
+ if test -f "$tmpdepfile"; then :
+ else
+ stripped=`echo "$stripped" | sed 's,^.*/,,'`
+ tmpdepfile="$stripped.u"
+ fi
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile"; then
+ outname="$stripped.o"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using \ :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mecanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
Property changes on: xfce4-cpugraph-plugin/trunk/depcomp
___________________________________________________________________
Name: svn:executable
+ *
Name: svn:eol-style
+ native
Added: xfce4-cpugraph-plugin/trunk/install-sh
===================================================================
--- xfce4-cpugraph-plugin/trunk/install-sh (rev 0)
+++ xfce4-cpugraph-plugin/trunk/install-sh 2007-11-22 08:07:56 UTC (rev 3616)
@@ -0,0 +1,323 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2005-05-14.22
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c (ignored)
+-d create directories instead of installing files.
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
+--help display this help and exit.
+--version display version info and exit.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+ case $1 in
+ -c) shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t) dstarg=$2
+ shift
+ shift
+ continue;;
+
+ -T) no_target_directory=true
+ shift
+ continue;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ *) # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ test -n "$dir_arg$dstarg" && break
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+ break;;
+ esac
+done
+
+if test -z "$1"; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src ;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ src=
+
+ if test -d "$dst"; then
+ mkdircmd=:
+ chmodcmd=
+ else
+ mkdircmd=$mkdirprog
+ fi
+ else
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dstarg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
+ fi
+ dst=$dst/`basename "$src"`
+ fi
+ fi
+
+ # This sed command emulates the dirname command.
+ dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+ # Make sure that the destination directory exists.
+
+ # Skip lots of stat calls in the usual case.
+ if test ! -d "$dstdir"; then
+ defaultIFS='
+ '
+ IFS="${IFS-$defaultIFS}"
+
+ oIFS=$IFS
+ # Some sh's can't handle IFS=/ for some reason.
+ IFS='%'
+ set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+ shift
+ IFS=$oIFS
+
+ pathcomp=
+
+ while test $# -ne 0 ; do
+ pathcomp=$pathcomp$1
+ shift
+ if test ! -d "$pathcomp"; then
+ $mkdirprog "$pathcomp"
+ # mkdir can fail with a `File exist' error in case several
+ # install-sh are creating the directory concurrently. This
+ # is OK.
+ test -d "$pathcomp" || exit
+ fi
+ pathcomp=$pathcomp/
+ done
+ fi
+
+ if test -n "$dir_arg"; then
+ $doit $mkdircmd "$dst" \
+ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+ else
+ dstfile=`basename "$dst"`
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Copy the file name to the temp name.
+ $doit $cpprog "$src" "$dsttmp" &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ if test -f "$dstdir/$dstfile"; then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+ || {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit 1
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+ }
+ }
+ fi || { (exit 1); exit 1; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+ (exit 0); exit 0
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
Property changes on: xfce4-cpugraph-plugin/trunk/install-sh
___________________________________________________________________
Name: svn:executable
+ *
Name: svn:eol-style
+ native
Added: xfce4-cpugraph-plugin/trunk/missing
===================================================================
--- xfce4-cpugraph-plugin/trunk/missing (rev 0)
+++ xfce4-cpugraph-plugin/trunk/missing 2007-11-22 08:07:56 UTC (rev 3616)
@@ -0,0 +1,360 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2005-06-08.21
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard at iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake at gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case "$f" in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f y.tab.h ]; then
+ echo >y.tab.h
+ fi
+ if [ ! -f y.tab.c ]; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f lex.yy.c ]; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ tar)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
Property changes on: xfce4-cpugraph-plugin/trunk/missing
___________________________________________________________________
Name: svn:executable
+ *
Name: svn:eol-style
+ native
Deleted: xfce4-cpugraph-plugin/trunk/po/xfce4-cpugraph-plugin.pot
More information about the Goodies-commits
mailing list