[Goodies-commits] r1814 - in xfce4-rss-plugin/trunk: . panel-plugin po

Adriano Bess adriano at xfce.org
Fri Jul 28 19:24:14 CEST 2006


Author: adriano
Date: 2006-07-28 17:23:50 +0000 (Fri, 28 Jul 2006)
New Revision: 1814

Added:
   xfce4-rss-plugin/trunk/AUTHORS
   xfce4-rss-plugin/trunk/COPYING
   xfce4-rss-plugin/trunk/ChangeLog
   xfce4-rss-plugin/trunk/INSTALL
   xfce4-rss-plugin/trunk/Makefile.am
   xfce4-rss-plugin/trunk/NEWS
   xfce4-rss-plugin/trunk/README
   xfce4-rss-plugin/trunk/acinclude.m4
   xfce4-rss-plugin/trunk/autogen.sh
   xfce4-rss-plugin/trunk/configure.ac.in
   xfce4-rss-plugin/trunk/panel-plugin/
   xfce4-rss-plugin/trunk/panel-plugin/Makefile.am
   xfce4-rss-plugin/trunk/panel-plugin/__init__.py
   xfce4-rss-plugin/trunk/panel-plugin/config.py
   xfce4-rss-plugin/trunk/panel-plugin/globals.py
   xfce4-rss-plugin/trunk/panel-plugin/globals.py.in
   xfce4-rss-plugin/trunk/panel-plugin/plugin.py
   xfce4-rss-plugin/trunk/panel-plugin/props.py
   xfce4-rss-plugin/trunk/panel-plugin/rss.desktop.in.in
   xfce4-rss-plugin/trunk/panel-plugin/xfce4-rss-plugin.py
   xfce4-rss-plugin/trunk/po/
   xfce4-rss-plugin/trunk/po/ChangeLog
   xfce4-rss-plugin/trunk/po/Makefile.in.in
   xfce4-rss-plugin/trunk/po/POTFILES.in
   xfce4-rss-plugin/trunk/po/pt_BR.po
   xfce4-rss-plugin/trunk/po/xfce4-rss-plugin.pot
Log:
Imported project into repository.


Added: xfce4-rss-plugin/trunk/AUTHORS
===================================================================

Added: xfce4-rss-plugin/trunk/COPYING
===================================================================
--- xfce4-rss-plugin/trunk/COPYING	                        (rev 0)
+++ xfce4-rss-plugin/trunk/COPYING	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year  name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

Added: xfce4-rss-plugin/trunk/ChangeLog
===================================================================
--- xfce4-rss-plugin/trunk/ChangeLog	                        (rev 0)
+++ xfce4-rss-plugin/trunk/ChangeLog	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,12 @@
+2006-07-28  Adriano Winter Bess  <adriano at xfce.org>
+
+	* AUTHORS, acinclude.m4, INSTALL, ChangeLog, configure.ac.in,
+	  COPYING, Makefile.am, autogen.sh, panel-plugin,
+	  panel-plugin/globals.py.in, panel-plugin/xfce4-rss-plugin.py,
+	  panel-plugin/plugin.py, panel-plugin/__init__.py,
+	  panel-plugin/Makefile.am, panel-plugin/rss.desktop.in.in,
+	  panel-plugin/props.py, panel-plugin/globals.py,
+	  panel-plugin/config.py, NEWS, README, po, po/pt_BR.po,
+	  po/Makefile.in.in, po/ChangeLog, po/POTFILES.in,
+	  po/xfce4-rss-plugin.pot: Imported project into repository.
+

Added: xfce4-rss-plugin/trunk/INSTALL
===================================================================
--- xfce4-rss-plugin/trunk/INSTALL	                        (rev 0)
+++ xfce4-rss-plugin/trunk/INSTALL	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,236 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).  Here is a another example:
+
+     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+

Added: xfce4-rss-plugin/trunk/Makefile.am
===================================================================
--- xfce4-rss-plugin/trunk/Makefile.am	                        (rev 0)
+++ xfce4-rss-plugin/trunk/Makefile.am	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,15 @@
+ at SET_MAKE@
+
+SUBDIRS = \
+	panel-plugin \
+	po
+
+EXTRA_DIST = \
+	intltool-extract.in \
+	intltool-merge.in \
+	intltool-update.in
+
+DISTCLEANFILES = \
+	intltool-extract \
+	intltool-merge \
+	intltool-update

Added: xfce4-rss-plugin/trunk/NEWS
===================================================================

Added: xfce4-rss-plugin/trunk/README
===================================================================

Added: xfce4-rss-plugin/trunk/acinclude.m4
===================================================================
--- xfce4-rss-plugin/trunk/acinclude.m4	                        (rev 0)
+++ xfce4-rss-plugin/trunk/acinclude.m4	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,37 @@
+## this one is commonly used with AM_PATH_PYTHONDIR ...
+dnl AM_CHECK_PYMOD(MODNAME [,SYMBOL [,ACTION-IF-FOUND [,ACTION-IF-NOT-FOUND]]])
+dnl Check if a module containing a given symbol is visible to python.
+AC_DEFUN([AM_CHECK_PYMOD],
+[AC_REQUIRE([AM_PATH_PYTHON])
+py_mod_var=`echo $1['_']$2 | sed 'y%./+-%__p_%'`
+AC_MSG_CHECKING(for ifelse([$2],[],,[$2 in ])python module $1)
+AC_CACHE_VAL(py_cv_mod_$py_mod_var, [
+ifelse([$2],[], [prog="
+import sys
+try:
+        import $1
+except ImportError:
+        sys.exit(1)
+except:
+        sys.exit(0)
+sys.exit(0)"], [prog="
+import $1
+$1.$2"])
+if $PYTHON -c "$prog" 1>&AC_FD_CC 2>&AC_FD_CC
+  then
+    eval "py_cv_mod_$py_mod_var=yes"
+  else
+    eval "py_cv_mod_$py_mod_var=no"
+  fi
+])
+py_val=`eval "echo \`echo '$py_cv_mod_'$py_mod_var\`"`
+if test "x$py_val" != xno; then
+  AC_MSG_RESULT(yes)
+  ifelse([$3], [],, [$3
+])dnl
+else
+  AC_MSG_RESULT(no)
+  ifelse([$4], [],, [$4
+])dnl
+fi
+])

Added: xfce4-rss-plugin/trunk/autogen.sh
===================================================================
--- xfce4-rss-plugin/trunk/autogen.sh	                        (rev 0)
+++ xfce4-rss-plugin/trunk/autogen.sh	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,26 @@
+#!/bin/sh
+#
+# $Id: autogen.sh 4312 2005-01-27 10:10:04Z jasper $
+#
+# Copyright (c) 2002-2005
+#         The Xfce development team. All rights reserved.
+#
+# Written for Xfce by Benedikt Meurer <benny at xfce.org>.
+#
+
+(type xdt-autogen) >/dev/null 2>&1 || {
+  cat >&2 <<EOF
+autogen.sh: You don't seem to have the Xfce development tools installed on
+            your system, which are required to build this software.
+            Please install the xfce4-dev-tools package first, it is available
+            from http://www.xfce.org/.
+EOF
+  exit 1
+}
+
+linguas=`ls po/*.po | sed 's/po\/\([a-zA-Z_]*\).po/\1/' | tr '\n' ' '`
+sed -e "s/@LINGUAS@/${linguas}/g" < "configure.ac.in" > "configure.ac"
+
+exec xdt-autogen $@
+
+# vi:set ts=2 sw=2 et ai:


Property changes on: xfce4-rss-plugin/trunk/autogen.sh
___________________________________________________________________
Name: svn:executable
   + *

Added: xfce4-rss-plugin/trunk/configure.ac.in
===================================================================
--- xfce4-rss-plugin/trunk/configure.ac.in	                        (rev 0)
+++ xfce4-rss-plugin/trunk/configure.ac.in	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,33 @@
+dnl configure.ac
+dnl xfce4-rss-plugin: an RSS aggregator plugin for the Xfce 4 Panel.
+
+dnl init autoconf
+AC_INIT([xfce4-rss-plugin], [0.0.1], [adriano at xfce.org])
+AC_PREREQ([2.50])
+
+dnl init automake
+AM_INIT_AUTOMAKE([dist-bzip2])
+AM_MAINTAINER_MODE
+
+dnl check for python
+AM_PATH_PYTHON
+
+dnl check for basic programs
+AC_PROG_INSTALL
+AC_PROG_INTLTOOL([0.31], [no-xml])
+
+dnl Check for i18n support
+XDT_I18N([@LINGUAS@])
+
+dnl Required packages
+AM_CHECK_PYMOD(pygtk,,,[AC_MSG_ERROR([not found])])
+AM_CHECK_PYMOD(gtk,,,[AC_MSG_ERROR([not found])])
+AM_CHECK_PYMOD(xfce4,,,[AC_MSG_ERROR([not found])])
+AM_CHECK_PYMOD(pyexo,,,[AC_MSG_ERROR([not found])])
+AM_CHECK_PYMOD(feedparser,,,[AC_MSG_ERROR([not found])])
+
+AC_OUTPUT([
+Makefile
+panel-plugin/Makefile
+po/Makefile.in
+])

Added: xfce4-rss-plugin/trunk/panel-plugin/Makefile.am
===================================================================
--- xfce4-rss-plugin/trunk/panel-plugin/Makefile.am	                        (rev 0)
+++ xfce4-rss-plugin/trunk/panel-plugin/Makefile.am	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,43 @@
+plugindir = $(libexecdir)/xfce4/panel-plugins
+dist_plugin_SCRIPTS = xfce4-rss-plugin.py
+
+rssplugindir = $(pythondir)/xfce4/rssplugin
+dist_rssplugin_PYTHON =		\
+	__init__.py		\
+	plugin.py		\
+	props.py		\
+	config.py
+nodist_rssplugin_PYTHON =	\
+	globals.py
+
+globals.py: globals.py.in
+	sed -e "s^%name%^@PACKAGE@^" \
+	    -e "s^%version%^@VERSION@^" \
+	    -e "s^%localedir%^${localedir}^" \
+	    < $< > $@
+
+EXTRA_DIST = globals.py.in
+
+# .desktop file
+#
+# Some automake trickery here. Because we cannot use $(libexecdir) in the
+# automake stage, we'll use sed to get the full path into the .desktop file.
+# We also need to let intltool merge the translated fields, so we add an
+# additional level of indirection: a <name>.desktop.in.in file.
+# 
+desktop_in_in_files = rss.desktop.in.in
+desktop_in_files = $(desktop_in_in_files:.desktop.in.in=.desktop.in)
+
+desktopdir = $(datadir)/xfce4/panel-plugins
+desktop_DATA = $(desktop_in_files:.desktop.in=.desktop)
+ at INTLTOOL_DESKTOP_RULE@
+
+EXTRA_DIST += $(desktop_in_in_files)
+
+DISTCLEANFILES = \
+	$(desktop_DATA) $(desktop_in_files)
+
+# get full path into .desktop file
+%.desktop.in: %.desktop.in.in
+	sed -e "s^@PLUGIN_PATH@^$(libexecdir)/xfce4/panel-plugins^" \
+		$< > $@

Added: xfce4-rss-plugin/trunk/panel-plugin/__init__.py
===================================================================
--- xfce4-rss-plugin/trunk/panel-plugin/__init__.py	                        (rev 0)
+++ xfce4-rss-plugin/trunk/panel-plugin/__init__.py	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,17 @@
+# xfce4-rss-plugin - an RSS aggregator for the Xfce 4 Panel
+# Copyright (c) 2006 Adriano Winter Bess <adriano at xfce.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License ONLY.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+# Init file for the rssplugin module

Added: xfce4-rss-plugin/trunk/panel-plugin/config.py
===================================================================
--- xfce4-rss-plugin/trunk/panel-plugin/config.py	                        (rev 0)
+++ xfce4-rss-plugin/trunk/panel-plugin/config.py	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,91 @@
+# xfce4-rss-plugin - an RSS aggregator for the Xfce 4 Panel
+# Copyright (c) 2006 Adriano Winter Bess <adriano at xfce.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License ONLY.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+from ConfigParser import SafeConfigParser
+
+class PluginConfig:
+    def __init__ (self, path, new):
+        self.path = path
+        self.init_defaults ()
+        if not new:
+            self.read_config ()
+        else:
+            self.changed = True
+            
+    def init_defaults (self):
+        self.changed = False
+        self.params = dict ()
+        self.feeds = list ()
+
+    def read_config (self):
+        parser = SafeConfigParser ()
+        rc = file (self.path, "r")
+        parser.readfp (rc)
+        rc.close ()
+
+        i = 0
+        while parser.has_option ("feeds", "name"+str(i)) and \
+              parser.has_option ("feeds", "url"+str(i)):
+            self.feeds.append (
+                { "name" : parser.get ("feeds", "name"+str(i)),
+                  "url"  : parser.get ("feeds", "url"+str(i)) }
+                )
+            i += 1
+
+    def write_config (self):
+        if not self.changed:
+            return
+        
+        parser = SafeConfigParser ()
+        parser.add_section ("defaults")
+        parser.add_section ("feeds")
+
+        i = 0
+        for feed in self.feeds:
+            parser.set ("feeds", "name"+str(i), feed["name"])
+            parser.set ("feeds", "url"+str(i), feed["url"])
+            i += 1
+
+        rc = file (self.path, "w")
+        parser.write (rc)
+        rc.close ()
+
+        self.changed = False
+
+    def get_param (self, param):
+        return self.params[param]
+
+    def set_param (self, param, value):
+        self.params[param] = value
+        self.changed = True
+
+    def traverse_feeds (self):
+        return self.feeds.__iter__ ()
+
+    def clear_feeds (self):
+        while len (self.feeds) > 0:
+            self.feeds.pop ()
+        self.changed = True
+
+    def add_feed (self, name, url):
+        self.feeds.append (
+            { 'name' : name,
+              'url'  : url  }
+            )
+        self.changed = True
+
+    def feeds_number (self):
+        return len (self.feeds)

Added: xfce4-rss-plugin/trunk/panel-plugin/globals.py
===================================================================
--- xfce4-rss-plugin/trunk/panel-plugin/globals.py	                        (rev 0)
+++ xfce4-rss-plugin/trunk/panel-plugin/globals.py	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,19 @@
+# xfce4-rss-plugin - an RSS aggregator for the Xfce 4 Panel
+# Copyright (c) 2006 Adriano Winter Bess <adriano at xfce.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License ONLY.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+NAME      = "xfce4-rss-plugin"
+VERSION   = "0.0.1"
+LOCALEDIR = "/usr/local/share/locale"

Added: xfce4-rss-plugin/trunk/panel-plugin/globals.py.in
===================================================================
--- xfce4-rss-plugin/trunk/panel-plugin/globals.py.in	                        (rev 0)
+++ xfce4-rss-plugin/trunk/panel-plugin/globals.py.in	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,19 @@
+# xfce4-rss-plugin - an RSS aggregator for the Xfce 4 Panel
+# Copyright (c) 2006 Adriano Winter Bess <adriano at xfce.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License ONLY.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+NAME      = "%name%"
+VERSION   = "%version%"
+LOCALEDIR = "%localedir%"

Added: xfce4-rss-plugin/trunk/panel-plugin/plugin.py
===================================================================
--- xfce4-rss-plugin/trunk/panel-plugin/plugin.py	                        (rev 0)
+++ xfce4-rss-plugin/trunk/panel-plugin/plugin.py	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,131 @@
+# xfce4-rss-plugin - an RSS aggregator for the Xfce 4 Panel
+# Copyright (c) 2006 Adriano Winter Bess <adriano at xfce.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License ONLY.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+import pygtk
+pygtk.require("2.0")
+import gtk
+
+import pyexo
+pyexo.require('0.3')
+import exo
+
+import gobject
+import xfce4
+from gettext import textdomain, bindtextdomain, gettext as _
+import sys
+from xfce4.rssplugin.globals import *
+from xfce4.rssplugin.props import PropertiesDialog
+from xfce4.rssplugin.config import PluginConfig
+import feedparser
+
+class RSSPlugin (xfce4.panel.Plugin):
+    def __init__ (self):
+        xfce4.panel.Plugin.__init__ (self)
+
+        # The following doesn't work (pyxfce bug?)
+        #xfce4.util.textdomain (NAME, LOCALEDIR, "UTF-8")
+        bindtextdomain (NAME, LOCALEDIR)
+        textdomain (NAME)
+
+        path = self.lookup_rc_file ()
+        new = False
+        if path == None:
+            path = self.save_location (True)
+            new = True
+        self.config = PluginConfig (path, new)
+
+        # Start with an empty feeds menu
+        self.feeds_mi = gtk.MenuItem (_("Feeds"))
+        self.feeds_mi.show ()
+        self.menu_insert_item (self.feeds_mi)
+        self.feeds_mi.set_submenu (gtk.Menu ())
+        if not new:
+            self.setup_feeds_menu ()
+        # Update every 30 minutes. Seriously, this should be
+        # configured by the user.
+        self.update_id = gobject.timeout_add (1800000, update_menu_cb, self)
+
+        refresh_mi = gtk.MenuItem (_("Refresh all"))
+        refresh_mi.connect ("activate", lambda refresh_mi_fn: update_menu_cb (self))
+        refresh_mi.show ()
+        self.menu_insert_item (refresh_mi)
+        
+        label = gtk.Label (_("RSS"))
+        label.show ()
+        eb = gtk.EventBox ()
+        eb.add (label)
+        eb.set_above_child (True)
+        eb.show ()
+        self.add (eb)
+        self.add_action_widget (eb)
+
+        self.connect ("size-changed", size_changed_cb, None)
+        self.connect ("configure-plugin", configure_cb, None)
+        self.menu_show_configure ()
+        self.connect ("destroy", destroy_cb, None)
+
+    def setup_feeds_menu (self):
+        feeds_menu = gtk.Menu ()
+        
+        for feed in self.config.traverse_feeds ():
+            # Many things can go wrong here, by now simply
+            # ignore everything
+            try:
+                feed_data = feedparser.parse (feed['url'])
+            except:
+                continue
+            feed_mi = gtk.MenuItem (feed['name'])
+            feeds_menu.append (feed_mi)
+            entries_menu = gtk.Menu ()
+            feed_mi.set_submenu (entries_menu)
+            i = 0
+            for entry in feed_data.entries:
+                # We limit the number of entries. Again,
+                # this should be configured by the user
+                if i >= 10:
+                    break
+                entry_item = gtk.MenuItem (entry.title)
+                entry_item.connect ("activate", feed_activated_cb, entry.link)
+                entries_menu.append (entry_item)
+                i += 1
+
+        feeds_menu.show_all ()
+        old_menu = self.feeds_mi.get_submenu ()
+        if old_menu != None:
+            old_menu.destroy ()
+        self.feeds_mi.set_submenu (feeds_menu)
+
+def feed_activated_cb (item, url):
+    exo.url_show (url)
+
+def size_changed_cb (plugin, size, dummy):
+    if plugin.get_orientation () == gtk.ORIENTATION_HORIZONTAL:
+        plugin.set_size_request (-1, size)
+    else:
+        plugin.set_size_request (size, -1)
+
+    return True
+    
+def configure_cb (plugin, dummy):
+    dlg = PropertiesDialog (plugin.config)
+    dlg.show_all ()
+
+def update_menu_cb (plugin):
+    plugin.setup_feeds_menu ()
+    return True
+
+def destroy_cb (plugin, dummy):
+    gobject.source_remove (plugin.update_id)

Added: xfce4-rss-plugin/trunk/panel-plugin/props.py
===================================================================
--- xfce4-rss-plugin/trunk/panel-plugin/props.py	                        (rev 0)
+++ xfce4-rss-plugin/trunk/panel-plugin/props.py	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,107 @@
+# xfce4-rss-plugin - an RSS aggregator for the Xfce 4 Panel
+# Copyright (c) 2006 Adriano Winter Bess <adriano at xfce.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License ONLY.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+import pygtk
+pygtk.require("2.0")
+import gtk
+import gobject
+from gettext import gettext as _
+
+class PropertiesDialog (gtk.Dialog):
+    def __init__ (self, config):
+        gtk.Dialog.__init__ (self, _("RSS Aggregator"),
+                             None, gtk.DIALOG_MODAL|gtk.DIALOG_NO_SEPARATOR,
+                             (gtk.STOCK_CLOSE, gtk.RESPONSE_CLOSE))
+        self.config = config
+        self.set_border_width (8)
+        self.vbox.set_homogeneous (False)
+        self.set_default_size (600, 400)
+
+        model = gtk.ListStore (gobject.TYPE_STRING, gobject.TYPE_STRING)
+        for feed in config.traverse_feeds ():
+            model.append ((feed['name'], feed['url']))
+        self.build_view (model)
+
+        vb = gtk.VBox (spacing=8)
+        but = gtk.Button (stock=gtk.STOCK_ADD)
+        but.connect ("clicked", add_cb, self.feeds_view)
+        vb.pack_start (but, False)
+        but = gtk.Button (stock=gtk.STOCK_REMOVE)
+        but.connect ("clicked", remove_cb, self.feeds_view)
+        vb.pack_start (but, False)
+
+        lab = gtk.Label (_("RSS Feeds:"))
+        lab.set_alignment (0.0, 0.5)
+        self.vbox.pack_start (lab, False)
+        hb = gtk.HBox (spacing=8)
+        hb.pack_start (self.feeds_view)
+        align = gtk.Alignment (0.5, 0.5)
+        align.add (vb)
+        hb.pack_start (align, False)
+        self.vbox.pack_start (hb)
+
+        self.connect ("response", response_cb, None)
+
+    def build_view (self, model):
+        tv = gtk.TreeView (model)
+        tv.set_headers_visible (True)
+        tv.get_selection().set_mode(gtk.SELECTION_MULTIPLE)
+
+        col = gtk.TreeViewColumn (_("Name"))
+        cell = gtk.CellRendererText ()
+        cell.set_property ("editable", True)
+        cell.connect ("edited", edited_cb, (model, 0))
+        col.pack_start (cell)
+        tv.append_column (col)
+        col.set_attributes (cell, text=0)
+        col.set_sort_column_id (0)
+        tv.set_search_column (0)
+
+        col = gtk.TreeViewColumn (_("URL"))
+        cell = gtk.CellRendererText ()
+        cell.set_property ("editable", True)
+        cell.connect ("edited", edited_cb, (model, 1))
+        col.pack_start (cell)
+        tv.append_column (col)
+        col.set_attributes (cell, text=1)
+
+        self.feeds_view = tv
+
+def response_cb (dlg, rid, dummy):
+    model = dlg.feeds_view.get_model ()
+    dlg.config.clear_feeds ()
+    for feed in model:
+        dlg.config.add_feed (feed[0], feed[1])
+    dlg.config.write_config ()
+    dlg.destroy ()
+
+def edited_cb (cell, path, text, data):
+    model, column = data
+    model[path][column] = text
+
+def remove_cb (but, feeds_view):
+    selection = feeds_view.get_selection ()
+    if selection.count_selected_rows () > 0:
+        (model, rows) = selection.get_selected_rows ()
+        refs = list ()
+        for path in rows:
+            refs.append (gtk.TreeRowReference (model, path))
+        for ref in refs:
+            model.remove (model.get_iter (ref.get_path ()))
+
+def add_cb (but, feeds_view):
+    model = feeds_view.get_model ()
+    model.append ((_("Name"), "http://"))

Added: xfce4-rss-plugin/trunk/panel-plugin/rss.desktop.in.in
===================================================================
--- xfce4-rss-plugin/trunk/panel-plugin/rss.desktop.in.in	                        (rev 0)
+++ xfce4-rss-plugin/trunk/panel-plugin/rss.desktop.in.in	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,7 @@
+[Xfce Panel]
+Type=X-XFCE-PanelPlugin
+Encoding=UTF-8
+_Name=RSS Aggregator
+_Comment=Check and display RSS feeds from the internet
+Icon=
+X-XFCE-Exec=@PLUGIN_PATH@/xfce4-rss-plugin.py

Added: xfce4-rss-plugin/trunk/panel-plugin/xfce4-rss-plugin.py
===================================================================
--- xfce4-rss-plugin/trunk/panel-plugin/xfce4-rss-plugin.py	                        (rev 0)
+++ xfce4-rss-plugin/trunk/panel-plugin/xfce4-rss-plugin.py	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,28 @@
+#!/usr/bin/python
+# xfce4-rss-plugin - an RSS aggregator for the Xfce 4 Panel
+# Copyright (c) 2006 Adriano Winter Bess <adriano at xfce.org>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License ONLY.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Library General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+import pygtk
+pygtk.require("2.0")
+import gtk
+import sys
+
+from xfce4.rssplugin.plugin import RSSPlugin
+
+plugin = RSSPlugin ()
+plugin.show ()
+gtk.main ()
+sys.exit (0)

Added: xfce4-rss-plugin/trunk/po/ChangeLog
===================================================================

Added: xfce4-rss-plugin/trunk/po/Makefile.in.in
===================================================================
--- xfce4-rss-plugin/trunk/po/Makefile.in.in	                        (rev 0)
+++ xfce4-rss-plugin/trunk/po/Makefile.in.in	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,222 @@
+# Makefile for program source directory in GNU NLS utilities package.
+# Copyright (C) 1995, 1996, 1997 by Ulrich Drepper <drepper at gnu.ai.mit.edu>
+#
+# This file file be copied and used freely without restrictions.  It can
+# be used in projects which are not available under the GNU Public License
+# but which still want to provide support for the GNU gettext functionality.
+# Please note that the actual code is *not* freely available.
+#
+# - Modified by Owen Taylor <otaylor at redhat.com> to use GETTEXT_PACKAGE
+#   instead of PACKAGE and to look for po2tbl in ./ not in intl/
+#
+# - Modified by jacob berkman <jacob at ximian.com> to install
+#   Makefile.in.in and po2tbl.sed.in for use with glib-gettextize
+#
+# - Modified by Rodney Dawes <dobey at novell.com> for use with intltool
+#
+# We have the following line for use by intltoolize:
+# INTLTOOL_MAKEFILE
+
+GETTEXT_PACKAGE = @GETTEXT_PACKAGE@
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+
+SHELL = /bin/sh
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+top_builddir = ..
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datadir = @datadir@
+datarootdir = @datarootdir@
+libdir = @libdir@
+DATADIRNAME = @DATADIRNAME@
+itlocaledir = $(prefix)/$(DATADIRNAME)/locale
+subdir = po
+install_sh = @install_sh@
+# Automake >= 1.8 provides @mkdir_p at .
+# Until it can be supposed, use the safe fallback:
+mkdir_p = $(install_sh) -d
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+GMSGFMT = @GMSGFMT@
+MSGFMT = @MSGFMT@
+XGETTEXT_ARGS = @XGETTEXT_ARGS@
+XGETTEXT = @XGETTEXT@ $(XGETTEXT_ARGS)
+INTLTOOL_UPDATE = @INTLTOOL_UPDATE@
+INTLTOOL_EXTRACT = @INTLTOOL_EXTRACT@
+MSGMERGE = XGETTEXT_ARGS="$(XGETTEXT_ARGS)" INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --dist
+GENPOT   = XGETTEXT_ARGS="$(XGETTEXT_ARGS)" INTLTOOL_EXTRACT=$(INTLTOOL_EXTRACT) srcdir=$(srcdir) $(INTLTOOL_UPDATE) --gettext-package $(GETTEXT_PACKAGE) --pot
+
+ALL_LINGUAS = @ALL_LINGUAS@
+
+PO_LINGUAS=$(shell if test -r $(srcdir)/LINGUAS; then grep -v "^\#" $(srcdir)/LINGUAS; fi)
+
+POFILES=$(shell if test -n "$(PO_LINGUAS)"; then LINGUAS="$(PO_LINGUAS)"; else LINGUAS="$(ALL_LINGUAS)"; fi; for lang in $$LINGUAS; do printf "$$lang.po "; done)
+
+DISTFILES = ChangeLog Makefile.in.in POTFILES.in $(POFILES)
+EXTRA_DISTFILES = POTFILES.skip Makevars LINGUAS
+
+POTFILES = \
+#This Gets Replace for some reason
+
+CATALOGS=$(shell if test -n "$(PO_LINGUAS)"; then LINGUAS="$(PO_LINGUAS)"; else LINGUAS="$(ALL_LINGUAS)"; fi; for lang in $$LINGUAS; do printf "$$lang.gmo "; done)
+
+.SUFFIXES:
+.SUFFIXES: .po .pox .gmo .mo .msg .cat
+
+.po.pox:
+	$(MAKE) $(GETTEXT_PACKAGE).pot
+	$(MSGMERGE) $< $(GETTEXT_PACKAGE).pot -o $*.pox
+
+.po.mo:
+	$(MSGFMT) -o $@ $<
+
+.po.gmo:
+	file=`echo $* | sed 's,.*/,,'`.gmo \
+	  && rm -f $$file && $(GMSGFMT) -o $$file $<
+
+.po.cat:
+	sed -f ../intl/po2msg.sed < $< > $*.msg \
+	  && rm -f $@ && gencat $@ $*.msg
+
+
+all: all- at USE_NLS@
+
+all-yes: $(CATALOGS)
+all-no:
+
+$(GETTEXT_PACKAGE).pot: $(POTFILES)
+	$(GENPOT)
+
+install: install-data
+install-data: install-data- at USE_NLS@
+install-data-no: all
+install-data-yes: all
+	$(mkdir_p) $(DESTDIR)$(itlocaledir)
+	if test -n "$(PO_LINGUAS)"; then \
+	  linguas="$(PO_LINGUAS)"; \
+	else \
+	  linguas="$(ALL_LINGUAS)"; \
+	fi; \
+	for lang in $$linguas; do \
+	  dir=$(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES; \
+	  $(mkdir_p) $$dir; \
+	  if test -r $$lang.gmo; then \
+	    $(INSTALL_DATA) $$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \
+	    echo "installing $$lang.gmo as $$dir/$(GETTEXT_PACKAGE).mo"; \
+	  else \
+	    $(INSTALL_DATA) $(srcdir)/$$lang.gmo $$dir/$(GETTEXT_PACKAGE).mo; \
+	    echo "installing $(srcdir)/$$lang.gmo as" \
+		 "$$dir/$(GETTEXT_PACKAGE).mo"; \
+	  fi; \
+	  if test -r $$lang.gmo.m; then \
+	    $(INSTALL_DATA) $$lang.gmo.m $$dir/$(GETTEXT_PACKAGE).mo.m; \
+	    echo "installing $$lang.gmo.m as $$dir/$(GETTEXT_PACKAGE).mo.m"; \
+	  else \
+	    if test -r $(srcdir)/$$lang.gmo.m ; then \
+	      $(INSTALL_DATA) $(srcdir)/$$lang.gmo.m \
+		$$dir/$(GETTEXT_PACKAGE).mo.m; \
+	      echo "installing $(srcdir)/$$lang.gmo.m as" \
+		   "$$dir/$(GETTEXT_PACKAGE).mo.m"; \
+	    else \
+	      true; \
+	    fi; \
+	  fi; \
+	done
+
+# Empty stubs to satisfy archaic automake needs
+dvi info tags TAGS ID:
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall:
+	if test -n "$(PO_LINGUAS)"; then \
+	  linguas="$(PO_LINGUAS)"; \
+	else \
+	  linguas="$(ALL_LINGUAS)"; \
+	fi; \
+	for lang in $$linguas; do \
+	  rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo; \
+	  rm -f $(DESTDIR)$(itlocaledir)/$$lang/LC_MESSAGES/$(GETTEXT_PACKAGE).mo.m; \
+	done
+
+check: all $(GETTEXT_PACKAGE).pot
+
+mostlyclean:
+	rm -f *.pox $(GETTEXT_PACKAGE).pot *.old.po cat-id-tbl.tmp
+	rm -f .intltool-merge-cache
+
+clean: mostlyclean
+
+distclean: clean
+	rm -f Makefile Makefile.in POTFILES stamp-it
+	rm -f *.mo *.msg *.cat *.cat.m *.gmo
+
+maintainer-clean: distclean
+	@echo "This command is intended for maintainers to use;"
+	@echo "it deletes files that may require special tools to rebuild."
+	rm -f Makefile.in.in
+
+distdir = ../$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir: $(DISTFILES)
+	dists="$(DISTFILES)"; \
+	extra_dists="$(EXTRA_DISTFILES)"; \
+	for file in $$extra_dists; do \
+	  test -f $(srcdir)/$$file && dists="$$dists $(srcdir)/$$file"; \
+	done; \
+	for file in $$dists; do \
+	  test -f $$file || file="$(srcdir)/$$file"; \
+	  ln $$file $(distdir) 2> /dev/null \
+	    || cp -p $$file $(distdir); \
+	done
+
+update-po: Makefile
+	$(MAKE) $(GETTEXT_PACKAGE).pot
+	tmpdir=`pwd`; \
+	if test -n "$(PO_LINGUAS)"; then \
+	  linguas="$(PO_LINGUAS)"; \
+	else \
+	  linguas="$(ALL_LINGUAS)"; \
+	fi; \
+	for lang in $$linguas; do \
+	  echo "$$lang:"; \
+	  result="`$(MSGMERGE) -o $$tmpdir/$$lang.new.po $$lang`"; \
+	  if $$result; then \
+	    if cmp $(srcdir)/$$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+	      rm -f $$tmpdir/$$lang.new.po; \
+            else \
+	      if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+	        :; \
+	      else \
+	        echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+	        rm -f $$tmpdir/$$lang.new.po; \
+	        exit 1; \
+	      fi; \
+	    fi; \
+	  else \
+	    echo "msgmerge for $$lang.gmo failed!"; \
+	    rm -f $$tmpdir/$$lang.new.po; \
+	  fi; \
+	done
+
+Makefile POTFILES: stamp-it
+	@if test ! -f $@; then \
+	  rm -f stamp-it; \
+	  $(MAKE) stamp-it; \
+	fi
+
+stamp-it: Makefile.in.in ../config.status POTFILES.in
+	cd .. \
+	  && CONFIG_FILES=$(subdir)/Makefile.in CONFIG_HEADERS= CONFIG_LINKS= \
+	       $(SHELL) ./config.status
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: xfce4-rss-plugin/trunk/po/POTFILES.in
===================================================================
--- xfce4-rss-plugin/trunk/po/POTFILES.in	                        (rev 0)
+++ xfce4-rss-plugin/trunk/po/POTFILES.in	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,9 @@
+# List of source files containing translatable strings.
+panel-plugin/xfce4-rss-plugin.py
+panel-plugin/globals.py
+panel-plugin/props.py
+panel-plugin/config.py
+panel-plugin/plugin.py
+
+# Files added by intltool-prepare.
+panel-plugin/rss.desktop.in.in

Added: xfce4-rss-plugin/trunk/po/pt_BR.po
===================================================================
--- xfce4-rss-plugin/trunk/po/pt_BR.po	                        (rev 0)
+++ xfce4-rss-plugin/trunk/po/pt_BR.po	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,50 @@
+# Portuguese translations for xfce4-rss-plugin package.
+# Copyright (C) 2006 Adriano Winter Bess <adriano at xfce.org>
+# This file is distributed under the same license as the xfce4-rss-plugin package.
+# Adriano Winter Bess <adriano at xfce.org>, 2006.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: xfce4-rss-plugin 0.0.1\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2006-07-28 14:12-0300\n"
+"PO-Revision-Date: 2006-07-15 15:22-0300\n"
+"Last-Translator: Adriano Winter Bess <adriano at xfce.org>\n"
+"Language-Team: Portuguese <ldp-br at bazar.conectiva.com.br>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n > 1);\n"
+
+#: ../panel-plugin/props.py:25 ../panel-plugin/rss.desktop.in.in.h:2
+msgid "RSS Aggregator"
+msgstr "Agregador RSS"
+
+#: ../panel-plugin/props.py:46
+msgid "RSS Feeds:"
+msgstr "Informações RSS"
+
+#: ../panel-plugin/props.py:63 ../panel-plugin/props.py:107
+msgid "Name"
+msgstr "Nome"
+
+#: ../panel-plugin/props.py:73
+msgid "URL"
+msgstr "URL"
+
+#. Start with an empty feeds menu
+#: ../panel-plugin/plugin.py:51
+msgid "Feeds"
+msgstr "Informações RSS"
+
+#: ../panel-plugin/plugin.py:61
+msgid "Refresh all"
+msgstr "Atualizar todos"
+
+#: ../panel-plugin/plugin.py:66
+msgid "RSS"
+msgstr "RSS"
+
+#: ../panel-plugin/rss.desktop.in.in.h:1
+msgid "Check and display RSS feeds from the internet"
+msgstr "Verifica e mostra informações RSS da internet"

Added: xfce4-rss-plugin/trunk/po/xfce4-rss-plugin.pot
===================================================================
--- xfce4-rss-plugin/trunk/po/xfce4-rss-plugin.pot	                        (rev 0)
+++ xfce4-rss-plugin/trunk/po/xfce4-rss-plugin.pot	2006-07-28 17:23:50 UTC (rev 1814)
@@ -0,0 +1,50 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL at ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2006-07-28 14:12-0300\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL at ADDRESS>\n"
+"Language-Team: LANGUAGE <LL at li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: ../panel-plugin/props.py:25 ../panel-plugin/rss.desktop.in.in.h:2
+msgid "RSS Aggregator"
+msgstr ""
+
+#: ../panel-plugin/props.py:46
+msgid "RSS Feeds:"
+msgstr ""
+
+#: ../panel-plugin/props.py:63 ../panel-plugin/props.py:107
+msgid "Name"
+msgstr ""
+
+#: ../panel-plugin/props.py:73
+msgid "URL"
+msgstr ""
+
+#. Start with an empty feeds menu
+#: ../panel-plugin/plugin.py:51
+msgid "Feeds"
+msgstr ""
+
+#: ../panel-plugin/plugin.py:61
+msgid "Refresh all"
+msgstr ""
+
+#: ../panel-plugin/plugin.py:66
+msgid "RSS"
+msgstr ""
+
+#: ../panel-plugin/rss.desktop.in.in.h:1
+msgid "Check and display RSS feeds from the internet"
+msgstr ""




More information about the Goodies-commits mailing list